Question about 2000 Pontiac Montana

2 Answers

Power window (drivers side) quit working on my 2000 Pontiac Montana. Can't be a fuse issue as the passenger side still works. Any ideas on a fix?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,168 Answers

Hello ablaing.

By far the most common issue with the Montana power window is the switch itself.
I stocked one in my shop for a few years as we replaced one in a Montana/Venture every week.

It still could be a bad window motor or a broken wire between the door and body where it flexes during door open/close.

Hope this helps you find a solution. If you would like further advise concerning this, please ask me here in a comment.
Thank you for using FixYa.
KL

Posted on Mar 20, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Pontiac Master
  • 2,007 Answers

More than likely just a faulty switch. Sometimes you can take them apart and clean them. Or, just go to an auto wrecker and get another one.

Posted on Mar 20, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pontiac montana 2002 interior fuse block removal


If the other windows are working, it would not be a fuse issue. You will have to take the inner door panel off, and check if the wires are getting to the motor, and not broke.

Apr 28, 2012 | 2002 Pontiac Montana

1 Answer

Passenger side power window does not work


We had this problem and just actually fixed it today. Had tried a passenger side door switch but that didn't help. We ended up buying and replacing the drivers side door switch and that solved the problem of our passenger side window not going up or down. The driver side switch is a one piece unit available from the dealer and it controls both driver and passenger side windows.

Mar 27, 2012 | 2003 Pontiac Montana

1 Answer

My 2003 montanas door locks on the switch quit working and the switch overhead for the rear power windows quit working . Any ideas???


it sounds like it might have blown a fuse, check your fuses and relays, under the hood, normally in a black box located on the drivers side, sometimes fuse box's are also under the instrument panel , down towards the floor, left of brake pedal.

Apr 15, 2011 | 2003 Pontiac Montana

1 Answer

2002 pontiac montana passanger pwr window


I beleive you need to change the Power Window Switches Module in the drivers side door panel, as these connections are interlinked within this module and it is usually the first part that fails. Especially that you already changed the switches & motor in the passenger door and it still does not work. Once you remove the dual switch module in the driver's side door, you will understand what I mean. Plus it is really easy to access. Good luck! I have the same model, Claude

Feb 19, 2010 | 2002 Pontiac Montana

1 Answer

Passenger power window on 2003 montana won't function


it is not the relay it is the motor in the window autozone...$25.00

Jul 12, 2009 | 2002 Pontiac Montana

1 Answer

1999 Pontiac Montana passenger sliding door stopped working.


Verify the wiring harness which passes under plastic step & carpet at front passenger side. This wiring harness goes from the firewall to the pillar on the right side and some have crimped connectors in them to act as junction between two or more wires (ususlly the 12volt feed), which deteriorate with time, especially with Salt & Water. Then the electric sliding door stops working and even driver the electric seat can loose power.

May 17, 2009 | 1999 Pontiac Montana

1 Answer

I have a 2000 pontiac montana When it rains


WATER IS COMING AROUND WINDOW MOLDING CHECK FOR LOCATION,USE A BOTTLE OF WATER.

May 07, 2009 | 2000 Pontiac Montana

1 Answer

Power windows front and rear dont work


inside the door panel for the module ,speedo lights and fuel gauge is another problem

Mar 28, 2009 | 2000 Pontiac Montana

Not finding what you are looking for?
2000 Pontiac Montana Logo

658 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...