Question about 1992 Mercury Sable

Open Question

What size bolts to use on a 92 sable front motor mount from mount to motor?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
Technopro
  • 243 Answers

SOURCE: install front motor mount

Probably you have to loosen the rear mounting as well so that you can get a little bit more play in the movement to fir the bolt in.
Cheers

Posted on Oct 28, 2008

Ad
  • 24 Answers

SOURCE: i need to know what size the motor mount bolt are on a eclipse

02886E MB309345 front motor mount to centermember bolt Go to: http://www.2gnt.com/CAPS/main0sub0.html Then click: Engine(Upper Left hand corner) Then Click: Engine Mounting and Support(Lower Right hand corner) Then click the corresponding part you need(to verify). Give that part number to your local Dealer and they can order that part for you.

Posted on Apr 14, 2009

Hightower971
  • 183 Answers

SOURCE: Need wrench sizes

Nope you need sae wrenches and sockets.

Posted on Apr 27, 2009

dennymulford
  • 1055 Answers

SOURCE: allen wrench size to fit caliper mounting bolt

some are 7/16 and some are 3/8 amd some are torx

Posted on May 30, 2009

bonedivers
  • 1140 Answers

SOURCE: how fix a motor mount from mercury sable

Replace it. Which one? Some are a real ***** to get to if not up in the air.

Posted on Sep 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bolt size for starter 92 tracker


mount starter mount
lost both?
they are both the same diameter.
the length is super easy, measure it.
the leaves, diameter, metric, 8 or 10mm and pitch
so using a box of random bolts with starter off
find one that fits, m8 or m10, or m12.
now you know the sizes, and with starter off the holes are right there. in front of you to test.
to get length, use drinking straw, and your thumb, nail
to find lenght fitted up by and then move straw to ruler, metric
ahhhhhh there is the lenght in 5min work.

if no bolts in the scrap box, at all, metric, buy some.

Oct 30, 2016 | 1992 Geo Tracker

1 Answer

How to lower front sub frame on 2002 mercury sable


support car place jack stands under sub frame. using an engine support to hold motor in place, disconnect anything that is attached to sub frame, ex: motor mounts. then unbolt sub frame bolts(4) and raise car to remove sub frame. note sub frame is heavy.

Jun 24, 2015 | Mercury Cars & Trucks

1 Answer

04 pt cruiser gt upper front right motor mount bolt size?


Is there some reason you can't use a wrench to determine the size? Or do you mean you lost the bolt? If so, get one from dealer--how much could it cost?

Jan 13, 2015 | Cars & Trucks

1 Answer

Replace front mounts on su b frame of 97 Sable


there really easy support the frame with a jack and pull the two 18mm bolts the dealer sells the replacement mounts.

Aug 08, 2010 | 1997 Mercury Sable

1 Answer

94' Cutlass Ciera S needs engine, have 92 Buick Century engine.


as long as they are the same size and type of motor the mounts will be the same as long as with the trans bolt pattern.

May 19, 2010 | 1994 Oldsmobile Cutlass Ciera

1 Answer

Need motor mounts for 2004 Chrysler Pacifica


I'm thinking it has 1 motor mount and 2 dog bones. The mounts usually cost around $30 each and the dog bones $20-25 depending on the material their made of. You can replace these yourself, one at a time. The engine has to be jacked up just enough to take the weight off when you remove the mount. After you have it remove, install you new one/ones and tighten. After removing jack, torque the bolts to spec. Same thing is done with the dog bones. It a type of Motor mount that prevents the engine from leaning weight. These are usually located, one front/top engine area and one on bottom engine area.

Jan 13, 2010 | 1995 Mercury Sable

1 Answer

How hard is it to fix a front motor mount on a 1994 merc sable


replacing that motor mount is about an hours work,not too bad a job!!!

Nov 27, 2009 | 1994 Mercury Sable

1 Answer

I nee the head bolt torque specs for a 95 sable


    • Tighten retaining bolts in sequence to 80 Nm (59 ft. lbs.).
    • Then back off bolts 360°.
CAUTION: Always use new cylinder head bolts when installing cylinder head or damage to engine may occur.
  1. Tighten the cylinder head retaining bolts in two final tightening steps in sequence shown in the following illustration:
    • 50 Nm (37 ft. lbs.)
    • 92 Nm (68 ft. lbs.)

Nov 03, 2009 | 1998 Ford Taurus

1 Answer

How to replace a front motor mount on a 1993 Mercury Sable 3.0 V6


To change the right front motor mount on a mercury sable. 1. you will need a jack and 22mm and a 5/8 socket.
2. you want to place the jack under the catalyst converter or somewhere on the motor that will lift the motor separatly from the crossbar that the front mount is attached to.
3. apply a little lift to the jack raising the car(3 or 4 hydraulics jack lifts).
4. using the 22 mm socket wrench take the bottom nut off the mount which is located under the right side of the crossbar.
5. using the 5/8 socket remove the top bolt that attaches the mount to the motor.
6. raise the jack 2 or 3 more times( giving you more room to move the old mount out).
7 . remove the old mount paying close attention to the way it is positioned, being sure not to put the new mount in wrong.
8. apply the new mount.
9. apply the top bolt and tighten .
10. lower the jack until the mount is seated correctly onto crossbar.
11. apply bottom nut and tighten.
12. glad i could help!

Nov 03, 2009 | 1993 Mercury Sable

3 Answers

Where can i get motor mounts.early 91 specific Saturn SL1


any parts store sells aftermarket ones fairly cheap.....Lee

Oct 31, 2009 | 1991 Saturn SL1

Not finding what you are looking for?
1992 Mercury Sable Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

fordexpert

Level 3 Expert

5546 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...