Question about 1981 Ford F 100

1 Answer

1980 ford f100 choke no voltage

I am not getting voltage to the choke so the truck wont start right up how do i check and/or fix this problem a wire diagram would help greatly

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I have somewhat of the same problem but not really. I would check the fuse but you have probably done that. I would run new medium grade wire from powerpoint ( 12V source ) that is hooked up to your ignition. Then run to your choke wire. you can also do a manual set of the choke to get it started. My choke doesn't work at all and needs to be replaced. Having the same starting problem though.

Posted on Sep 25, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Ford f100 starter diagram


You have starter relay on fender lining. A large post on either side of relay? You can take two long shank screwdrivers, touch each post, then touch the shanks. The starter motor should crank. If you try that make sure tranny is in park or neutral and parking brake is set. Battery has a full charge and battery connections all good? Starter motor is good? Engine isn't seized?
I couldn't get everything in one picture, there is the ignition switch and neutral or clutch switch depending on the tranny and wiring circuits.
starter-jch5ehnh0bdgsp3tb133a2lm-4-0.jpg

Dec 25, 2017 | Cars & Trucks

1 Answer

Can a chevrolet motor and transmission be put in a 1980 to 1985 Ford F100?


yeah with motor mount change & trans. mount change little bit of wiring issue it will run fine. they put chevy engine in ford mustang all the time that why they run run so quick

Dec 06, 2010 | 1981 Ford F 100

1 Answer

1966 ford f100 will not start repalced points plugs wires coil voltage regulatornot getting any fire


Have you checked the starter solenoid? Replace this and see if you're getting fire then. They are usually suspect and the first link in the chain between your battery and the distributor.

Dec 11, 2009 | 1966 Ford Mustang

1 Answer

1972 Ford F100 Alternator/Voltage Regulator wiring


Here is what you need.

09a463c.jpg

Please rate this a fixya

Feb 09, 2009 | Ford F-100 Cars & Trucks

3 Answers

1981 ford f100 2wd


This sounds like a telltale choke issue. You running carburated right?
If it is what i think it is you have a choke thermostat on the carb. If so check the votage on the wire and if you have power then the choke thermostat has to be replaced. you can do a manual set of the choke behind the carb just to see if this is the problem.

Oct 19, 2008 | 1981 Ford F 100

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

217 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

fordexpert

Level 3 Expert

5655 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...