Question about Toyota Corolla
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Shorts are no fun... Make sure your grounds are all clean (Wires) . Trace you wiring for brakes check your trailer hitch loom if you have one that could be your problem. Good luck Debby
Posted on Nov 18, 2008
Check the brake light switch under the dash at the brake peddle and make sure its working if it does not close when you depress the brake peddle the lights will not work You may hve to remove the lower cover for the dash to get at the switch
Posted on Sep 03, 2009
I have a solution for you, as I see your same issue in my shop quite a bit...There are two possibilities:
You may have a broken wire. This is a very common issue.
Open up the trunk lid, and look at the hinge on the driver side. You will see a wiring harness, in a plastic tube, attached to the arm that holds th trunk lid to the car.... Remove the tubing, and follow the wires towards the back seat area. You are probably going to find a wire that has been broken, from the many actions of opening and closing the trunklid. Splice and resolder the wire, and you should be fine.
The other issue is the tallamp failure sensor may have burned out. This too is rather common. Open the trunk lid, and pull back the inner carpeting on the driver side of the trunk. Locate a small box (it will be white or blue), on a brace. The box is closer to the quater panel sheetmetal. Remove the box, and take it apart. If it looks or smells burnt, you need a new sensor.
Posted on Nov 30, 2009
Were there any water leaks into the interior? Or did you ever jump start someone else's car? I had the same exact problem resulting from jump starting a friend's car. It spiked the electronic control unit (ECU) computer. I changed the ECU and the problem was fixed.
Posted on Feb 02, 2010
Tips for a great answer:
Feb 06, 2016 | Toyota Cars & Trucks
Dec 17, 2012 | Cars & Trucks
Oct 03, 2012 | 1990 Subaru Legacy
Sep 21, 2012 | 2007 Toyota Tacoma
Jun 04, 2011 | 1997 Honda Accord
Jan 14, 2010 | 1997 Toyota Camry
Nov 18, 2008 | 1997 Toyota Camry
141 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: