Question about 1988 Ford Festiva

1 Answer

Head lights dont work bulbs are fine all other lights work ok

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 80 Answers

Check fuses and replace, you have to have always spare fuses .

Posted on Mar 20, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My head lights dont work but all others do


Are you sure the bulbs are ok? Yes it would be a strange coincidence they both stopped at same time. Sounds like a ground connection to lights may be the problem. Trace wire back from head lights see if you see any problems. Heatlight dim relay may be the problem or conections to and from it. It's ground connection may be the problem.

Feb 27, 2015 | 2001 Jeep Grand Cherokee

1 Answer

2010 ch. traverse rt turn signal dont work


left side flashes, so relay is ok! check for a bad ground or a burnt out bulb. Good-Day! or a faulty bulb socket.

May 14, 2014 | 2011 Chevrolet Traverse

2 Answers

My low beams keep shutting on and off but high beams are fine


this could be solved by taking the bulb out of its holder and cleaning the contact of the bulb and holder.
turn the ignition on after this with the bulbs in the holder and plugged in but not in the headlight kitself.Turn the lights on and see if the work if still the same try moving the bulb while on in its older and see if its just loose. if so holding it one way it will work. wedge something something to hold it in place or buy a used bulb holder.
Check the fuses at the same time and the wire plug that powers the bulb. check and clean the contacts of these also
Let me know how it goes and ill help again if it persists.
bakerboy11@hotmail.com
Automobile

May 17, 2010 | 1994 Dodge Ram

2 Answers

Lights ont work and the bulbs are fine


could be head light relay or bad head light switch.

Jan 01, 2010 | 2002 Ford Explorer Sport Trac

1 Answer

Head lights and main beam not working


change the light stalk/switch common fault

Nov 13, 2009 | 1986 Renault Sport

3 Answers

I DONT HAVE PARKING LIGHTS, BUT THE TURN SIGNALS AND BRAKE LIGHTS WORK, BULBS OK, NOW WHAT?


check fuses if they are ok then you need to replace the light switch.

Jun 25, 2009 | 1989 Eagle Premier

2 Answers

Turn signals work but the brake lights do not how do i get them to work? i already changed the flasher.


I have a 2001 Ford F150, my brake lights dont work. Ive replaced the bulbs, checked the fuses,and the brake switch on side of the brake pedal was replaced. I still dont have any brake lights. My third brake light works fine, along with my running lights,flashers, blinkers.

Jun 18, 2009 | 1985 Ford F150

1 Answer

Both 2003 oddyssey brake lights dont work High


clean bulbs socket out using the electronic spray cleaner for electrical connectors.

May 13, 2009 | 2003 Honda Odyssey

2 Answers

1991 volvo tail lights


Could you take out a bulb and with a testlight/probe check that you do in fact have power to that circuit .Also check that they are the correct bulb for that application I have seen people put indicator bulbs in where therse supposed to be a double filament bulb.Does the base of the bulbs lead contacts line up with the two steel terminals inside the plug?

Oct 20, 2008 | 1991 Volvo 240

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5471 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...