Question about Nissan King Cab

1 Answer

Tappet settings for nissan zd30(ddt) - King Cab Nissan Cars & Trucks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Nissan Master
  • 22,095 Answers

12 th inlet and 14 exhaust will suffice as its not a racing car ,yes i know some of these older vehicles had different specs say a morris minor to ford 1.6 lotus cortina the difference was considerable but for a common cooking engine the gaps i have shown will suffice ,the main difference in the tappet settings on older vehicles was to allow for valve overlap but this was mainly on early sports vehicles as the camshafts couldnt always be machined to the right specs on a mass production scale ,But these settings i have given will do for around 90% of vehicles ,Make them too tight for speed by increasing valve overlap and the petrol economy goes through the roof make them too wide like a GT cortina at 22th exhaust and they sound like a bag of nails

Posted on Mar 20, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have changed cylinder head gasket and need the torque settings for the zd30 nissan engine


try this head torgue link.. that wont highlight

http://www.cylinderheadsaustralia.com.au/torque-settings

the ZD30 is listed half way down the list
and picture of tension sequence

HEAD BOLT TIGHTENING SEQUENCE.
• STEP ONE: 102Nm
• STEP TWO: Loosen All Bolts.
• STEP THREE: 44Nm
• STEP FOUR: +90*
• STEP FIVE: +90*
• IMPORTANT: ALL BOLT THREADS, BOLTHEADS AND WASHERS MUST BE LIGHTLY OILED.
• USING AN OLD HEADBOLT WITH GROOVE CUT DOWN THREAD, CLEAN THE BLOCK HEADBOLT THREADS.




why are these torque setting and sequence
numbers no longer on the VRS head gasket packaging

Oct 28, 2016 | Nissan Cars & Trucks

1 Answer

Where can i find a pump injector spare part of isuzu zd30 small in nairobi


no year state
zd30 is that not Nissan?
what car, is a zd30
wow country, stated, like 3rd time in 1,000,000 post,
you are savvy poster...
this is usa forum and our stores down sell zd30 parts
you need to shop in Nairobi. (or near)
my guess, is go to any Nissan dealer?
Diesel engine.
my guess is your car is.... right (its a wiki page)

  • Patrol - Chassis Code Y61
  • Caravan - Chassis Code E25 and VWE25
  • Urvan - Chassis Code E25
  • Homy - Chassis Code E25
  • Elgrand - Chassis Code E50, E51
  • Terrano - Chassis Code R50
  • Terrano - Chassis Code R20 (Europe only)
  • Atleon

Feb 24, 2016 | Isuzu Cars & Trucks

1 Answer

Nissan navara 2002 twin cab diesel zd30 malfunction light comes on randomly


NISSAN NAVARA questions and answers

www.roadtestreports.co.uk/vans/nissan/navara/qanda/
Results 1 - 40 of 322 - Ask and answer questions on a variety of NISSAN NAVARAmodels. Help and advice ... Have a Navarra Rally Raid 2004 double cab pick up. ... Navara V6 2011 - loss of power & engine management light on. .... ZD30 I have changed the diesel filters after noticing that it's jerking when I'm on full throttle.

Nissan Patrol GR Y61 ZD30 starting problem - YouTube

? 1:23
https://www.youtube.com/watch?v=JxHKfYDCgFQ
Jan 16, 2013 - Uploaded by sspyropoul
After replacing the diesel filter seals and water trap i had no problem .But you ... They still glow for like 15 ...Missing: twin ‎cab ‎randomly

Nissan D22 Navara receives YD25 2.5-litre diesel

www.themotorreport.com.au/.../nissan-re-power-their-d22-navara-range
Jan 31, 2008 - Nissan's popular Navara D22 workhorse range has been ... On top of the 4x4 DX single cab's equipment, the dual cab ST-R adds .... the yd25 engine have a overheating problem, so how comes nissan is ... I believe it is a ZD30 engine. .... with no problems except a cracked injector line (pretty random fault).

Jan 13, 2016 | Nissan Cars & Trucks

1 Answer

How do I set tappets on Nissan 1400


With a special tool called a feeler gauge remove the valve covers and one by one bring the cylinders up to top dead center (both valves are fully closed at this point) adjust to factory spec. All adjustments are done cold. If engine is very high miles reduce the clearances in specs by slight amount (.002") to the tight side to account for wear in the valve train parts.

Nov 16, 2015 | 2006 Nissan 1400 Bakkie

1 Answer

What are the tightening torques of the nissan zd30 engine?


follow this link for the HEAD torque settings and click on torque tables
http://www.speedwayautoparts.com/index35.htm

Nov 13, 2014 | Cars & Trucks

1 Answer

Where is 0071 P1-Cam Pos Sen on ZD30 Nissan Caravan Japan


Elai, im really trying but the info your giving is not making sense, you said Isuzu como with a Nissan motor what size is the motor just examples( 2.0L 3.5L) give me some thing to help me, was the motor changed ? try this formula 1)year 2)make)3model 4)motor size ,if you must go to vehicle registration for info , or service manual in glove compartment . send back info and I will do my best to help you .
Woody

Sep 13, 2014 | 2007 Isuzu I 290

1 Answer

2010 Y61 ZD30 Patrol code P0090,P0088?


Check your wire diagram it could be IGN bad wire

Jun 23, 2014 | 2004 Nissan Nissan almera tino

1 Answer

How do i set the TAPPETS on a Nissan TD27 2005


tappets cannot be tight and noisy at the same time . Check the rocker and rocker shaft for wear in the shaft and rocker bushes.

Mar 21, 2014 | Cars & Trucks

1 Answer

WHAT IS THE TAPPET CLEARANCE FOR NISSAN GA 15 CARBURATED,INTAKE AND EXHAUST?


what is the tappet clearance setting for the ga15 nissan sunny
i need help to know the clearance of intake and the exhaust valve.

Nov 02, 2009 | Nissan Sentra Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

464 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...