Question about 2001 Dodge Durango

1 Answer

My 2001 dodge durango dies right down when started even hot or cold it back fires i have changed the sensors it does this in open loop to closed loop

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 318 Answers

Backfiring is a great symptom because you know what the problem is right away. It seems to be a timing issue. Crankshaft positioning sensor, distributor, electronic ignition, etc. Diagnose your problem concentrating on anything to do with timing. Vehicle just don't just don't jump timing unless something goes wrong of someone does work to it recently. If it backfires from the the exhaust you timing is advance and if it backfires from the intake it's retarded. It's is your firing timing.

Posted on Mar 20, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My 2002 dodge durango with 4.7 dies and starts right back up


Our 2001 Durango would start and die immediately unless I really got on the gas and kept it revved up. It also would start right back up.) Once it warmed up, it would then idle normally. The fix was to get a new battery. The old one was (apparently) not holding the voltage high enough to make the electronics and sensors happy when the vehicle was first started.

Feb 17, 2015 | 2002 Dodge Durango

Tip

Dodge Durango Won't Start, Turns over, NO BUS on instrument cluster


1998 - 1999 Dodge Durango 3.9L
2000 - 2001 Dodge Durango 4.7L
1998 - 2000 Dodge Durango 5.2L
1998 - 2001 Dodge Durango 5.9L

The PCM has 3 connectors plugged into it. Try wiggling each connector and listen for a clicking sound, starting with the connector furthest from the front of the Durango, and the middle connector with a white top.

If this doesn't help, replace your PCM. The PCM (power control module) can get hot, causing a short or broken circuit inside the module. Replacing the module will fix the problem. If your truck dies randomly when it's hot outside, but will start back up after it cools down, this is probably the problem.

on Jun 18, 2010 | Dodge Durango Cars & Trucks

1 Answer

2001 durango vehicle cranks a few times before starting and you have to hold accelerator to floor befoor it fires up


have you changed the fuel filter, sometimes it is the most obvious things we don't check or change

Jun 17, 2014 | 2001 Dodge Durango

2 Answers

92 bonneville idles rough and dies in closed loop


What's missing when it dies ? Fuel , spark ? Why even mention closed loop , that has no bearing on it . When the vehicle get's hot ,a sensor is shorting out internally causing it to die. Then when it cools down it starts again, correct ? Pull plug wires off one of the coils an turn the key to start , do you see spark ? Put a fuel pressure gauge on the vehicle an see if there is pressure . Or find yourself a guy like this
How to test GM 3 wire crank sensor hall effect type

Apr 04, 2017 | 1992 Pontiac Bonneville

1 Answer

2005 dodge ram 1500 hemi. will set code 0132 when starting only some times. O2 replaced both sides.


Try changing the coolant temp sensor, it determines when the ECU shifts from open loop (cold) to closed loop(hot)

May 29, 2017 | Dodge Ram Cars & Trucks

1 Answer

2001 durango lungges forward and then dies when i come to a stop. But if i put it in nutual its ok.


hay does it do this when it is in open loop and then closed loop? does it do it when it is cold? If you run to town then shut it off and wait maybe hour or so then start it take off and it dies right down and then feels like it will die or shut off then all of a sudden does it go fast like nothing happened

Mar 20, 2011 | 2001 Dodge Durango

1 Answer

REPLACED FUEL PUMP UNIT CRANKS TAKES ABOUT 10


upper 02 sensor run on a loop till the engine gets warm then it reads the sensor get you back on the road fast it will work better if the engine is warm when you take out the o2 sensor

May 04, 2010 | 2001 Dodge Durango

2 Answers

2000 Dodge durango wont start after driving for a while.


i had the same problem in a dodge ram pick up. ended up being the coil. when the coil got hot my truck would die or not start again until the engine had cooled down. replaced the coil, and whalaaaaah. no more trouble. good luck!!!!!!!!!!!!!!

Apr 21, 2009 | 2000 Dodge Durango

2 Answers

99 Dodge Durango wont start when its cold


check battery i had hard time starting when cold and took battery in and when i bought it used they had a smaller battery in the car and was not turning the car over. it happened when the battery was weak when it got cold

Mar 04, 2009 | 1999 Dodge Durango

Not finding what you are looking for?
2001 Dodge Durango Logo

233 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...