Question about Chevrolet Blazer
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The licence plate lights are in the same line as your tail light wiring assembly. I assume your tail lights are working or you would have got a ticket for that. The wire is either cut, broken or unhooked from the tail light wires (which usually are brown). If you can not find the problem, you can always run a new wire to the tail light wire from your licence plate wire. Then they should work.
Your other problem is that the license plate ground is rusty & not grounding, which would also not let them work, so you should probably check that first. Rick
Posted on Apr 14, 2009
SOURCE: license plate light replacement
The license plate lights are in the ledge above the license plate. 2 screws keep the lens cover in place. Remove the screws, and the cover comes off. Just pull the lamp out (wedge base) and replace.
Posted on Apr 18, 2009
you can buy a chilton or haynes manual at a parts store, or on ebay. Sometimes on ebay they sell the diagrams that are emailed to you in an ebook as well..
Posted on Sep 20, 2009
SOURCE: license plate bulb 99 alero
remove the 2 license lamp screws from outside,above the lic.plate then from insidethe trunk pull up the lic.lamp housing and replace the bulb.it should pull straight out
Posted on Dec 07, 2009
Please follow the instructions below carefully to change the bulbs in the licence plate of your cad deville;
1.All you have to do is put a flat blade screw driver on the right side of the bulb housing and gently push to the left. This will release the catch holding it in and it will drop out and down on the end of its wiring connector.
2.1/4 turn the bulb and remove. Replace the bulb and just put the housing back into the opening left side first, then just push up on the right side till you hear a click. Takes about 1 min per light. Works for all Deville types from 99-08
Posted on Aug 12, 2010
Tips for a great answer:
May 16, 2015 | Cars & Trucks
Jan 23, 2013 | 2000 Chevrolet Blazer
Sep 10, 2011 | 1999 Chevrolet Blazer
Jul 01, 2010 | 2000 Chevrolet Blazer
Mar 31, 2010 | 2002 Chevrolet Tahoe
Jan 12, 2010 | 2005 Chevrolet Silverado 1500 2WD
41 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: