Question about 2004 Mazda 6

2 Answers

Mazda 6s IAT or MAF Wiring Schematics

I'm adding a power model, and need to know which of the five wires is the IAT: Can you list all five by color?

Thanks,

John G

http://tinyurl.com/globalone
GoEthos4e@gmail.com

Posted by on

  • 1 more comment 
  • stercus11 Nov 26, 2008

    i just added a performance chip and am not sure if i connected it to the IAT sensor, now my auto power windows wont work, on the mazda6i 2.3l is it located on top of the air cleaner hose or closer to the engine block?

  • Anonymous Dec 16, 2008

    on a 2003 mazda 6s what two color wires make up the iat sensor

  • Jonathan Dawson May 11, 2010

    Are you asking what color wires, or do you want to know what each one goues to?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

What are the colors of the two IAT wires in the MAF sensor?

Posted on May 31, 2009

I need to identify what each color goes to Blue, Red, White, White/w blk Stripe, and some other color. Which ones are for the IAT sensors?

Posted on Aug 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to know which two wires on the MAF lead to the IAT there's five wires need to know which 2 go to the IAT on a 2008 LR two Land rover installing a chip


You can go online to Free auto & truck manuals and get the right manual for your vehicle and it has wiring diagrams in the back of the manual usually. Hope that Helps.

Feb 02, 2014 | Cars & Trucks

1 Answer

Iat sensor diagram maf groundthe


ok 95 , must be 16v as only that engine has MAF.
the sensor is on the air cleaner box, has 2 wires. and the ohms
is on the below page. as is the full schematic, and the maf wiring
is the cel glowing key on , and off driving 20miles? if not post the flash codes. DTCs.
the iat is the least important in fact the 92 its MISSING !
the maf tests are here. too. many tests,
suzuki sells a maf for $1000 (dogs) and the china one is junk.
so test it carefully or go broke fast.
IAT and ECT ( both read same)
http://www.fixkick.com/ECU/temp-sensors.html

see gen 2 here.
http://www.fixkick.com/schematics-run.html

der MAF.
http://www.fixkick.com/sensors/92-95MAF/92-95-MAF-testing.html


Nov 27, 2013 | 1995 Geo Tracker

1 Answer

Need IAT/MAF wiring diagram for a 2008 5.7 liter Toyota Tundra


go please to www.autoelectronico. com and download for free. this web is spanish . However you can translate the information. I strong recommend you by powerful information update for any models cars.
Try it and fix it for FREE.
God bless you

Jul 02, 2012 | 2008 Toyota Tundra Double

1 Answer

2007 BMW 328i IAT Wire Colors in MAF Sensor


If you are installing a so called "chip" don't do it, it can harm the engine due the changes it causes in fuel control as related to Intake Air Temperature and burn holes in the pistons. All that little part really is, is a $.50 (50 cent) resistor that you can buy from Radio Shack, it is smoke and mirrors and it also will void any warranty you may have. I for one strongly advise against installing it, it will make not difference in power and all there claims are just lies and falsehoods..

Jun 08, 2012 | BMW Cars & Trucks

5 Answers

MAF, IAT, MAP and Coolant Level Sensor Problem


They share the engine wiring harness from the computer (called the PCM) and a common ground circuit, which is referred to as the signal return. So I think you need to look for a defective ground.

Nov 18, 2011 | 2003 Mazda MPV

2 Answers

Maf/iat sensor location 99 concorde and wut wires are the power wires?


9_23_2011_11_54_17_pm.jpg


9_23_2011_11_56_25_pm.jpg

This vehicle has MAF or IAC sensors - not ?? MAF or IAT ??

Which do you need the wiring for?

Sep 23, 2011 | 1999 Chrysler Concorde

1 Answer

I have 3 codes po431 po103 and po113


P0103 Mass or Volume Air Flow Circuit High Input P0113 Intake Air Temperature Circuit High Input P0431 Warm Up Catalyst Efficiency Below Threshold (Bank 2) A code P0431 may mean that one or more of the following has happened:
  • The catalytic converter is no longer functioning properly
  • An oxygen sensor is not reading (functioning) properly
  • There is an exhaust leak
A code P0113 may mean that one or more of the following has happened:
  • Internally failed IAT sensor
  • Faulty connection at IAT sensor
  • Open in IAT ground circuit or signal circuit
  • Short to voltage in IAT signal circuit or reference circuit
  • IAT harness and/or wiring routed too close to high-voltage wiring (e.g. alternator, spark plugmag-glass_10x10.gif cables, etc.)
  • Faulty PCM (less likely but not impossible)
A code P0103 may mean that one or more of the following has happened:
  • The MAF may be disconnected, or a wiring connection may be bad
  • The MAF sensor may be damaged
  • The vehicle computer may be faulty (very rare)

May 25, 2011 | 2006 Mazda 6

1 Answer

I need to know what color the wires to the IAT are on the MAF plug.


Hi, please provide model, year and engine size for this request, and I'll see if I can get the wiring diagram.

Jan 10, 2011 | Toyota Tundra Cars & Trucks

1 Answer

2005 4RUNNER V6


Hi

I don't know what the wiring colours are in Puerto Rico, but if one of the wires is red then that is the input, and if there is a yellow wire with a green stripe then that is the IAT output.

Regards

Geordie

Jun 12, 2008 | 2002 Toyota RAV4

Not finding what you are looking for?
2004 Mazda 6 Logo

1,404 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...