Question about 2000 Dodge Caravan

1 Answer

My window is off the track on the drivers side. I do not know how to get the door panel off so I can try to fix it.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

If i remember right there are 2 philips screws at the bottom of the trim panel , one behind the inner and one in the pocket to pull the door shut. then you need to wedge a fork tool between the panel shell and the door itself and pry the clips apart. they are tough and you will feel like you are going to break them and you mostlikely will to a couple. once you get one off thogh thats were a fork tool can get on both sides of a clip so as not to break any more

Posted on Mar 20, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I put the driver side power window back on track and the door panel for my 2003 Nissan Altima 3.5SE?


R/R the inner door panel, slide the window back on track, reconnect the window transmission to the window, (or reinstall the trans) bolt everything back together (window motor, window trans to door etc.) Make sure the window is in the UP position. use the switch to raise the window & keep it up if all is back together before finally installing the door panel ( make sure the switch & other plugs are plugged in before the door panel is reinstalled.) Lights etc. Good luck

Sep 14, 2014 | 2003 Nissan Altima

1 Answer

2005 chevy equinox. drivers side power window. window gets stuck have to manually help it get...


need to remove the door panel and check the tracks or for debris in track

Jun 17, 2017 | Cars & Trucks

1 Answer

The windows on the front driver and front passenger doors are off track. Is there any way to open the doors and take the panel off to get to the harness?


what do you mean off track are they jammed in the door panel or do you mean they work once in a while if they are out of the channel you take your door panel off and remove the window and reinstall in the track make sure you lube the track because sometimes the window jams because the channel is to dry and causes the window to stick if you are saying the windows work once in a while the harness at the drivers side usaully breaks in the rubber garment so you have no choice to take panel off and try to remove the garment and chk your harness to repair cut wires if worst to worst you can cut the rubber garment with a exato knife be careful not to cut other wires and cause a greater problem then when you fix the wires you can tape up the old garment but i need more imfo

Dec 31, 2010 | 1998 Pontiac Grand Prix

2 Answers

My driver side window will not roll down properly. I stops about half way and seems to bend inward toward the car instead of going down further. I have taken the door panel off and can not tell exactly...


remove the door panel. it may have come off track. go to any auto parts store and buy a haynes manual for your specific car. they are based on a complete teardown of vehicle. this book will show how to remove door panel. they are about 20 to 25 dollars.

Dec 15, 2010 | 1997 Dodge Neon

1 Answer

I need to know how to get the drivers side door panel off. My window is off track and I need to fix


how to remove door panel on a 97 expedition, pull up on master window switch bezel careful clips break easily and unplug the connectors, remove triangle trim piece top right side of panel pull out then up, screw behind it remove it, remove red lense plastic piece on bottom of door small screw driver careful breaks easily screw behind it remove it, remove bezel around door handle turn it to get off handle screw behnd it remove it, pull straight up on door handle gently then hard if needed, after it is loose from door remove light bulb socket from behind door panel turn it, unplug power window switch.
thats it reverse to put back on

Nov 25, 2010 | 1997 Ford Expedition

1 Answer

How do I remove driver side door window


You need to remove inner door panel by unscrewing the screws on inner door handle and take a flat screw driver wedge it between the panel and door use flash light to see the clips along the sides and lower part of door and pry them free. then look through the inner door cut outs to find window track. Once you see it use ratchet or screw driver and loosen the window free form track. Then carefully remove window.

Apr 01, 2010 | 2003 Mazda MPV

1 Answer

How do i fix my 1996 honda accord driver side window? When i roll down the window it falls off the track! they are manual, not power.How do I fix?


If you take the door panel off which there is only 2 to 4 screws holding in on and some clips in the back. pull the window to the top of the door and tape in place pull the track up and line track up with the window fully up and make sure to tighten track bolts on both the window and door bolts. hope that helps

Dec 10, 2009 | 1996 Honda Accord

1 Answer

Drivers side window has slipped off track 2006 mazda mpv


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Pull back the weather seal and you can readjust the window mechanics.

Sep 29, 2009 | 2006 Mazda MPV

1 Answer

2005 Chevy Colorado window is off track


remove the door panel and check the operating mechanism ,bet that one of the fixings on the lower part of the window that lifts and lowers it is adrift

Aug 05, 2009 | 2005 Chevrolet Colorado

1 Answer

Driver side window is off track and stuck about 75% closed


If your power window motor is not moving up or down at all inside the door panel, you will need a new motor.
If your window is stuck and will not move, it is the motor - it is bad.
If your window falls down into the door panel, the window is off track.
Replacing a window motor is an easy fix, get another one from an auto parts store and replace it.
Good luck!

Mar 12, 2009 | 1993 Honda Accord

Not finding what you are looking for?
2000 Dodge Caravan Logo

188 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...