Question about 1994 Toyota 4Runner

1 Answer

Having trouble putting vaccum hoses and fuel hoses back after replacing head gaskets,6 cilinder,3.0l,94 toyota 4 runner

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Toyota Master
  • 1,051 Answers

If you mean it's difficult slipping the hose onto the nipple, try a little vaseline on the nipple to make sliding the hose easier.
Also try free registration at www.autozone.com Free registration gives you free access to several repair and shop manuals for most vehicles. You'll get detailed info on making the repairs.

Posted on Mar 20, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Water in all 4 cylinders


oooo, not good, Head needs to be checked for cracks. After a failure, REMEMBER the gasket is not the culprit, or cause, but a victim. Head usually needs to be fly cut, if not cracked. Take head to machine shop for checking.

Jul 26, 2010 | 1994 Toyota Pickup

Tip

94 toyota 4runner,having trouble with vaccum hoses & fuel injecters hose...


this is a tip for all those who are looking for free diagrams, free diagrams are very hard to get... allthough most of us have access to diagrams, copywright laws prevent us from posting the diagram for free. alot of people ask for picture diagrams of what they are working on but most of the time there is not even a diagram in the vehicle service manual- your best bet with diagrams is to actually go to the dealership and ask them to print you out 1... they will most likely help u with this at no charge at all. the parts catalog that they use usually has an "exploded veiw" that shows what parts hook to the part your looking for. i also hear that autozone has something on ther website thats kinda like a service manual. so basicaly what i'm saying is there is no "free" manual or diagrams out there. hope this can save you a little time, and good luck.

on Mar 19, 2011 | 2000 Ford Focus

2 Answers

1991 toyota 4 runner heater does not work, the fan works, but no hot air comes out front or back. I just had the head gasket replaced and also cannot use a thermostat because it will overheat.


If you can not use a thermostat. you have bigger issues than no heat. head may have crack. head gasket may have been put on wrong. Plugged radiator. bad waterpump. if everything is functioning properly you need a thermostat to keep the engine running at the proper temp that is was designed to run at. Make sure that the cooling system is completely full and does not have an air lock preventing coolant from circulateing.

Oct 25, 2009 | 1991 Toyota 4Runner

1 Answer

What other motors can replace the factory 94 toyo 4runner V6 3.0?


NO your best bet is to remove both heads and send them away for crack testing and surface grinding plus make sure the block has a flat and clean serface ,no water holes eaten away and near to the cylinder bores, if all ok then get the heads done and tighten down to correct tension which you will get on the VRS (valve regrind set). then it will last for years

Oct 01, 2009 | Toyota 4Runner Cars & Trucks

1 Answer

Where is the thermostat located on a 94 toy/4 cylider


Follow the top radiator hose from the radiator to where it attaches onto the engine. The thermostat is inside the housing that the hose attaches to. Remove the radiator hose at thermostat housing. Remove the housing. There are usually two bolts. The thermostat is inside. Scrape off all old gasket material and clean the housing. Install new thermostat and gasket. Be sure not to overtighten the bolts on the housing. The housing is usually cast metal and is easily cracked or broken if the bolts are overtightened. Hope this helps and best wishes.

Jul 31, 2009 | 1994 Toyota 4Runner

1 Answer

MIL on with a trouble code of P0174


CODE 174 IS BANK TWO FUEL SYSTEM LEAN.IF U HAD A FUEL PRESSURE ISSUE U WOULD HAVE A CODE 171 ALSO(BANK 1 LEAN)CK FOR A VACUUM LEAK AT THE INTAKE MANIFOLD GASKET(SPRAY CARB CLEANER WHERE MANIFOLD MEETS THE HEAD)IF THE IDLE PICKS UP THE GASKETS ARE BAD.SOMETIMES THE GASKETS GO BAD INTERNALLY.U CAN SPRAY CARB CLEANER IN TO THE OIL FILL HOLE.IF IDLE PICKS UP INTAKE GASKETS ARE BAD.GOOD LUCK

May 01, 2009 | 1999 GMC Denali

2 Answers

Runs real lean and surges under throttle massive loss of power


if you have a vacuum guage handy hook it to your manifold and if your reading is under 15 hg then you have a manifold gasket leaking or you could just replace the gasket.

Apr 28, 2009 | 1995 Toyota 4Runner

3 Answers

Loose coolant, but no leaks


it could be going out the exhaust when youre driving and you wouldnt know it was happening

Feb 25, 2009 | 1993 Toyota 4Runner

2 Answers

Loss of power


Do you know how check if every cilinder is working? with the engine in idle, go to the distribuitor cap and carefully unplug one at the time, every cilinder spark plug wire,in the cilinder you dont see a diference in rpm variation, that cilinder is not working, replace spark plug, if you see spark jumping fron the distribuitor cap torch the spark plug wire, another cause to a cilinder fail could be a loss of compression in one or more cilinder

Oct 29, 2008 | 1994 Toyota Pickup

Not finding what you are looking for?
1994 Toyota 4Runner Logo

Related Topics:

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...