Question about 2005 Ford Freestar

Open Question

How to remove a spare tire from under ford freestar van without wrench

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 74 Answers

SOURCE: Ford F250 Spare Tire Removal

there is a hole in the bumper or when you let the tail gate down there should be a hole. there should be some rods with the factory jack to allow you to let the tire down

Posted on Jun 18, 2008

blueextc3221
  • 15935 Answers

SOURCE: How do I release the spare tire from under my van? 94 Dodge Caravan

It is underneath the van at the back. Open the rear hatch door and look for a little piece of carpet cut in a square on the right side. Lift that and there should be a bolt there that you can turn with the tire wrench. That will lower the tire.

Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

Posted on Apr 23, 2009

  • 183 Answers

SOURCE: FORD F-250 Spare Tire

Have someone pry down on the tire while turning...

Posted on Sep 14, 2008

dustyboner
  • 331 Answers

SOURCE: tire reset on in ford freestar

Reset without message center:
To reset turn the ignition to the ON position, depress and Trip/odometer
button (located in the instrument cluster) until “TIRE RESET” or
“CHECK TIRE AND RESET” is displayed in the odometer display window.
Once “TIRE RESET” or “CHECK TIRE AND RESET” is displayed,
press and hold the button for three seconds. The low tire warning indicator light will flash three times
as the low tire warning system begins to initialize.

------------------------------------------------------------------------
Reset with message center:
To reset turn the ignition to the ON position, press the set up button on
the message center until “SYSTEM CHECK” is displayed. Press the
RESET button until “HOLD RESET TO RELEARN” is displayed, continue to hold the button for three
seconds. The low tire warning indicator light will flash three times as the low tire warning system begins to initialize.

Posted on Oct 13, 2008

  • 1 Answer

SOURCE: where is the low tire reset button located on 2005 ford freestar?

It is on the same button as the Trip Odometer. Cycle through until you see Tire Reset and hold the button down.

Posted on May 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I get my spare tire off of a 2004 ford freestar van that didnt come with a jack or tire tools


Either buy a used tool from a salvage yard, or use a socket and ratchet. You should be able to find a socket or extension that will fit the post in the floor to lower the tire.

Mar 25, 2016 | Ford Cars & Trucks

2 Answers

How to release tether holding spare tire


There is a lug wrench in the rear acess panel that holds the jack and wrench. Depending on your van, either lift up on the cargo bin door in the rear and you will see a hex shaped nut or in the 2nd row seats there is a little circle that is cut out of the carpet with the same hex shaped nut undeerneath. Use the lug wrench and turn the nut counterclockwise to lower the spare tire to the ground....Mike

Jul 11, 2011 | 2005 Ford Freestar

2 Answers

How do i release the tether holding the spare tire


There is a lug wrench in the rear acess panel that holds the jack and wrench. Depending on your van, either lift up on the cargo bin door in the rear and you will see a hex shaped nut or in the 2nd row seats there is a little circle that is cut out of the carpet with the same hex shaped nut. Use the lug wrench and turn the nut counterclockwise to lower the spare tire.

Jul 11, 2011 | 2005 Ford Freestar

1 Answer

Where is the spare tire kept on the 1998 Ford windstar


If you open the rear liftgate on carpet just forward of moulding you will see a plastic dimple with a square around it. Lift up that flap and you will see a nut this is the same size as lug nuts on your wheels. Now look to your right and you will see a compartment (it has to lock clips at top) pull open clips and remove panel inside you will find lug wrench jack and jack handle. remove wrench and go back to that flap and using your lug wrench loosen the nut. At this time your spare tire will be suspended by a cable and will be heading towards the ground look under back of van and there is your spare.

Nov 07, 2010 | 1998 Ford Windstar

1 Answer

How do I remove the spare tire from up under the van?


Inside the rear compartment, right above where the spare tire is located, there should be a small H shaped **** in the carpet, lift the flaps and there will be a nut to conect the lug wrench to. Just put the wrench on there and start turning, it takes a while to get it low enough to remove the tire. Hope this helps you.

Oct 18, 2010 | 1999 Plymouth Voyager

1 Answer

How to lower spare tire


Find a plastic cover located in the carpet at the back right corner. Lift the cover to locate a nut the size of a lugnut of your tires. Using the van's lugnut wrench, turn nut counter-clockwise to lower the spare tire. Have fun and don't pinch yourself while removing the tire.

Oct 14, 2010 | 2004 Ford Freestar

2 Answers

Where is the spare tire located on a 1995 ford aerostar?


Section 00-02: Lifting, Jacking and Spare Tire Stowage 1995 Aerostar, Ranger, Explorer Workshop Manual
TIRE STOWAGE Tire, Spare, Removal, Aerostar If the Aerostar is a standard length vehicle the spare tire is mounted inside to a carrier at the left rear quarter panel. To remove the spare tire, remove the wing nut and plate. A flat tire can be temporarily stowed in the same location.



If the Aerostar is the bus with a standard length body or extended length (all models), the temporary spare tire is stowed at the rear of the vehicle under the body. The Aerostar standard length E-4WD bus spare tire is mounted on the floor.
  1. Insert lug nut wrench into the actuator hole and turn counterclockwise until the cable extends to allow the spare tire to be pulled rearward from under the vehicle.
  1. Slide spare tire to the rear and remove the retainer from the wheel.
  1. To stow cable/retainer with spare tire removed, insert cable fitting into carrier rear wall slot, place wheel retainer against the carrier, and turn lug nut wrench clockwise until slack is removed.
please rate, thanks

Jul 09, 2010 | 1995 Ford Aerostar

1 Answer

How do I release the spare tire from under my van? 94 Dodge Caravan


It is underneath the van at the back. Open the rear hatch door and look for a little piece of carpet cut in a square on the right side. Lift that and there should be a bolt there that you can turn with the tire wrench. That will lower the tire.

Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

Apr 23, 2009 | Dodge Grand Caravan Cars & Trucks

2 Answers

1993 Ford E150 Mark III


hello
i have a 1992 and im sure this would be the same
To remove the spare tire:
1. Open both of the rear doors. Remove the
access cover from the rubber strip found
behind the left door. Insert tapered end of
lug wrench or tip of jack handle through the
access hole. Turn counterclockwise until the
cable extends enough to allow the spare tire
to be pulled rearward from under the
vehicle.
2. Slide the spare tire to the rear and remove
the retainer from the wheel.
3. To stow the cable/retainer with spare
removed, turn jack handle wrench clockwise
until slack is removed.

dont be afraid to crank on it real hard sometimes they stick.
good luck paul

Oct 01, 2008 | 2003 Ford E150

2 Answers

2004 ford freestar drivebelt


All you need is a 13mm boxed end wrench. The tensioner pulley is the one all the way on the bottom towards the rear of the van. You can reach it under the van. Slide under the van in front of the passenger front tire and you will wee the pulley. Put the wrench on the bolt and pull towards you to release the tension on the belt.

Jul 17, 2008 | 2004 Ford Freestar

Not finding what you are looking for?
2005 Ford Freestar Logo

Related Topics:

745 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...