Question about 2004 Pontiac Aztek

Open Question

Wiring diagram for window switch and motor etc??passenger window will not work

Posted by on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

elix0411
  • 3530 Answers

SOURCE: 02 pontiac montana passenger go down with

Welcome to Fixya

Unfortunately you could have one of several problems. Generally all window power goes through one fuse, but check your fuse box and make sure you don't have a blown fuse. Otherwise, it is likely a bad motor or bad wiring to the motor. You will have to strip off the decorative trim and door cover to access; but even them they aren't always that easy to get to. Consider taking it to an auto electrician or find a mechanic that does electrical. Thank you for using Fixya!

Posted on Feb 27, 2011

  • 7353 Answers

SOURCE: Passenger window won't go up

At the passenger switch its the Dark Blue and Brown wires.At the Master switch its the Light Blue and Tan wires. But I think your problem is a bad Master Switch

Posted on Sep 01, 2010

airjer995
  • 5332 Answers

SOURCE: Looking for wiring diagram for

You'll need to pull the door panel and check for power and ground at the 2 wire connector located near the window motor (there should be a dark blue wire and a brown wire). With a test light there should be power on one of the two wires at any time. If there is power on both wires with the switch in the up position than the switch is bad. If the only wire powered up in the up position is the dark blue wire than try tapping the motor while holding the switch in the up position. If it starts to work than the motor is bad.

On a side note check for power with all the connectors plugged in. You can also jump the connections at the motor. Supply a ground to the brown wire and supply power to the dark blue wire and the window should go up.

Posted on Sep 24, 2010

dttech
  • 4803 Answers

SOURCE: passenger side window does not work from either

Did you check to see if you had power and ground to the window motor before you replaced it? A faulty master switch (driver door) will cut power and/or ground from BOTH switches.

Also, a common fault is the wires get broken in the umbilical between the driver door and the body. If the driver window works OK, then either the TAN or the LIGHT BLUE wire could be broken. This will keep the passenger window from working from EITHER switch.

Please also review this article:

What Else Could Be Wrong?

Posted on Jul 18, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My passenger electric window is not working


Yes , test the electrical circuit ! Find a wiring diagram at http://www.bbbind.com/free_tsb.html free wiring diagrams . Do you have DVOM - digital volt ohm meter ? Do you know how to test volts ? Check for power at the passenger window switch . Go on you tube an watch a few different trouble shooting videos . How To Diagnose your Power Window Problem Is the Switch or motor bad Then test the circuit . Hope this helps you out .

May 18, 2016 | 2005 Kia Sedona

2 Answers

Pontiac g6 2007 driver side and rear windows won't roll up but the passenger does what do I do to fix


If they go down but not up. Replace the master switch on the drivers door. 3 don't usually die at they same tie unless it is that switch.

Apr 26, 2016 | Pontiac Cars & Trucks

1 Answer

Why Can't operate driver window?


The window switch could be bad or the window motor or the window regulator . The same could be wrong with the roof ,switch ,motor no power . Did you go on youtube ,could have videos on how to test ! Check out some basic electrical trouble shooting videos , how to read a wiring diagram too ! Go to http://www.bbbind.com/free_tsb.html free wiring diagrams . Check the diagrams to see what powers everything , see what all is involved in the circuit , fuse's , relay's switches , motors etc... Buy yourself a digital volt ohm meter an test the circuit .

Apr 17, 2016 | Cars & Trucks

1 Answer

Anyone have the wiring diagram for a 1988 buick century window switch, drivers door ?


Enter this string in your web browser under the images search bar"wiring diagram for a 1988 buick century window switch"
and you also look at this web page:
http://ricksfreeautorepairadvice.com/window-goes-up-but-not-down-window-goes-down-but-not-up/

Feb 05, 2015 | 1988 Buick Century

1 Answer

2001 power window ford escape


Rather then swaping parts that don't fix it , testing the electrical is the proper way to diagnose . Using a wiring diagram to locate testing point's in the circuit . Tesing for B+ voltage at the switch , in an out , at the motor etc.... How to test power window switch motor 1985 2001 Toyota

How To Diagnose your Power Window Problem Is the Switch or motor bad

The Trainer 24 Power Window Troubleshooting


Apr 25, 2017 | Cars & Trucks

1 Answer

1993 Bighorn Passenger window not working


There could be a lock controller somewhere that is not working.
I don't have a wiring diagram for your truck.

Generally, the power window motors are grounded thru the doors, or the switches provide ground. In your case the motors are probably grounded thru the doors.
The master switch "overrides" the door switch so you have extra wires that do the same thing. The E wire probably gives the door switch power and the A and C are up and down. The B and D are override circuits from the master that bypass the door switch.
Sometimes the motor is grounded thru the switch then thru the door.

Jun 28, 2012 | Isuzu Trooper Cars & Trucks

2 Answers

1997 Chevy Lumina, I replaced the passenger side power window motor due to the factory one failing, The person before me cut all the wires going to the motor and toggle switch in their attempts to fix /...


There is a wiring harness on hinge side of passenger door correct, take a look at the wiring colors. Hope you can read it. At the window switch, the outside wire on either side is voltage or ground depending on which direction, up or down, reversing motor. You don't need the window switch for testing, you should be able to operate from driver door master switch. If you get the wires reversed, the only thing that will happen is, up will be down and down will be up, if that happens, reverse the wires. Just my opinion.
At the window switch, top middle wire is lockout, so only the driver can operate the windows.
power window-jlrraf3b1gxaofzrmafkiszu-5-0.jpg

Apr 26, 2017 | 1997 Chevrolet Lumina

2 Answers

Passenger window doesn't work, new regulator.


if u have ck all fuses & relays& tried the passenger switch & still nothing,,could have broken wire between door & door jam where the rubber boot is ,,u mite have to peel it back to see wires

May 08, 2010 | 1994 Toyota Camry

1 Answer

2005 Chrysler T&C passenger side window went down and won't come up. All other automatic windows and door locks work fine - don't hear any motor sound / buzz / etc. when either driver side or passenger...


If the window had not been slow in it's action before it stopped working I'm guessing you only have a connection problem. I would remove the door panel and using a multimeter check the hot wire to see if power is reaching the switch. If it is check the connection on the motor. If power is reaching the motor through the switch you have a faulty motor. If at any point of testing there is no power backtrack the power wire to find where the break is. (it's usually in the door jam)

Apr 13, 2010 | 2005 Chrysler Town & Country

1 Answer

2005 Chevy Cavalier Electric Window Wiring Diagram


Tom,
See this alot. Sorry,It appears that is a symptom of a bad motor. If it moves an inch or so,then nothing,after a few minutes another inch or so,it's motor time!

Apr 08, 2009 | 2005 Chevrolet Cavalier

Not finding what you are looking for?
2004 Pontiac Aztek Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...