Question about 1994 Ford Probe

Open Question

How do i change a sunroof motor on a 1994 ford probe?

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Sunroof removal

I took mine off. I did rip about a inch on the carpet trying. There are 7 plastic fasteners that you need to pop off (used a long flat screwdriver). Once you take it off, you will see the 4 bolts under the sunroof that are on the bracket. You do not need to take of the tracking rail to remove the sunroof. Not too hard, just gotta try.

:)

Posted on Nov 11, 2008

  • 84 Answers

SOURCE: 1993 Ford Probe needs motor mounts

is the model with the V6 mazda motor, if so it can be a bit difficult if you have little mechanical experience, but it is doable without removing the motor or transmission. we would allow 3 hours to complete the whole job.

Posted on Dec 23, 2008

tepfy
  • 319 Answers

SOURCE: no sound from stereo in 1994 ford probe

did you use a converter plug set for your factory wiring or did you do the siring your self. If you used a factory plug converter then your radio is probably bad, if you did the wiring yourself then check your splices and get a diagram for the wirring before you send the radio back. If you want a easy way to wire the radio in correctly the first time go to cruthfield and buy the converter cable for your radio and vehicle. Its $10 and saves you a lot of time an energy.

tepfy

Posted on May 01, 2009

greg_margo
  • 1959 Answers

SOURCE: how do i hook this up to a 1994 ford probe

I think this is what you're looking for.

http://www.the12volt.com/installbay/stereodetail/901.html

Posted on May 06, 2009

  • 4848 Answers

SOURCE: 1994 Ford Probe Air Bag light is on

Common fault on FORD

Usually due to a poor connection in the YELLOW PLASTIC CONNECTOR underneath the passenger seat.


Just push it together properly and it should clear the AirBag fault


Posted on Sep 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remove


change it

Mar 24, 2014 | 1994 Mazda MX-6

1 Answer

Front wheel bearings 1994 ford probe


Since I am out in the middle of nowhere with internet, a woodsplitter, and no hydraulic press, I removed the hub assembly from vehicle and used the hydraulic woodsplitter to press the bearings out. An adapter can me made to cover the blade and provide a flat surface.

Feb 17, 2012 | 1994 Ford Probe

1 Answer

Im just asking what size the motor for a 1994 ford probe???


A dual-overhead-cam 4-cylinder engine powered base Probes in 1993, developing 115 horsepower. The GT coupe held a 164-horsepower V6, also of dual-overhead-cam configuration. Both engines are Mazda designs. No more turbocharged engines were available. A 5-speed manual transmission was standard; 4-speed overdrive automatic optional. Except for a slight horsepower/torque boost in 1995 for the 4-cylinder engine, and a mild V6 torque increase the year before, powertrains saw no change in this period.

zjlimited_447.jpg

Hope this helps (remember to rate this answer).

Jan 12, 2011 | 1994 Ford Probe

1 Answer

1994 ford probe v6 5 spd all gears work except


Mileage, Trans flush, or throw out bearing

Mar 19, 2010 | 1994 Ford Probe

1 Answer

How do I change the brake light blub on a 1994 ford probe


open the trunck
remove the matt
you will see the light house
open it
take the holding out
and replace
you will need no tools

Feb 22, 2010 | 1994 Ford Probe

1 Answer

1994 Ford Probe Air Bag light is on


Common fault on FORD

Usually due to a poor connection in the YELLOW PLASTIC CONNECTOR underneath the passenger seat.


Just push it together properly and it should clear the AirBag fault


Sep 03, 2009 | 1994 Ford Probe

1 Answer

1994 Ford Probe GT fuel cot out lite


may have to change fuel pump

Aug 10, 2009 | 1994 Ford Probe

1 Answer

No sound from stereo in 1994 ford probe


did you use a converter plug set for your factory wiring or did you do the siring your self. If you used a factory plug converter then your radio is probably bad, if you did the wiring yourself then check your splices and get a diagram for the wirring before you send the radio back. If you want a easy way to wire the radio in correctly the first time go to cruthfield and buy the converter cable for your radio and vehicle. Its $10 and saves you a lot of time an energy.

tepfy

Mar 19, 2009 | 1994 Ford Probe

1 Answer

Sunroof removal


I took mine off. I did rip about a inch on the carpet trying. There are 7 plastic fasteners that you need to pop off (used a long flat screwdriver). Once you take it off, you will see the 4 bolts under the sunroof that are on the bracket. You do not need to take of the tracking rail to remove the sunroof. Not too hard, just gotta try.

:)

Aug 18, 2008 | 1994 Ford Probe

Not finding what you are looking for?
1994 Ford Probe Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...