Question about 2001 Oldsmobile Aurora
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Door Ajar Warning Light Stays On
Our Ford Expedition & an Olds Silhouette Premier & both did the same thing. Someone online said to spray the inside door where the metal connects with the frame & sensors are there with WD-40. We did & it fixed the problem. Maybe this will work for yours.
Posted on Aug 25, 2008
SOURCE: ignition key won't turn and
I was shopping for a winter beater and found a 99 Alero. The dealer and I had a "B" of a time getting the key to turn. You had to push it in, pull it out a micron, cross your eyes, stick out your tounge and turn it to get it to work. 181000 + miles of wear on the ignition key had it worn down pretty good. The dealer remade the key with the key code from the manufacturer (NOT just recut from the old key) and it turned like a charm. He also said something about the old key having to be in it, removed and then the new key inserted withing 3 seconds, so the "chip" (which is in the ignition switch) can memorize the new key. (?) Sounds hokey but he got it to work. My understanding is that without the key in the on position you can't move the shifter. Good luck.
Posted on Oct 04, 2008
If it has a automatic transmission make sure it's in park (try pushing the shifter while twisting the key). Try wiggling the steering wheel while twisting the key. If the car is parked for long periods of time the ignition cylinder could be sticking (try spraying WD-40 in around the key). I had a classic car and the key fell out while the engine was running. And when I turned it off I couldn't turn it again even with the key, I had to replace the lock cylinder.
Posted on Feb 11, 2009
SOURCE: 1997 oldsmobile cutlass supreme
This Too Is A Starter Problem, If >>The Battery Terminals Are Clean <<And >>The Starter Terminals Are Clean and TIGHT <<,I Would Wait Till It Wont Start Again and SMACK THE STARTER 2-3 times with a HAMMER then Try Starting it. If It Starts then it is The Starter. I KNOW this seems A Little UNCONVENTIONAL BUT For 30 Years This Technique Has Diagnosed HUNDREDS of STARTER Problems for me.
Posted on Feb 13, 2009
Sounds like carbon build up on the contacts inside the electrical ignition switch which is not the key cylinder. Its located on the lower steering coluum if coluum shift or if you have a floor shift it will be inside the console
Posted on May 29, 2009
Tips for a great answer:
Mar 26, 2017 | 1998 Lincoln Navigator
May 30, 2015 | 2003 Pontiac Grand Prix
May 30, 2014 | 2003 Chevrolet Avalanche
Feb 26, 2011 | 2004 Volkswagen Jetta
Feb 06, 2011 | 1997 Ford Expedition
Feb 22, 2010 | 2003 Ford Expedition
Nov 05, 2009 | 1999 Ford Windstar
Oct 03, 2009 | 2004 Dodge Durango
Mar 07, 2009 | 2003 GMC Yukon XL
Nov 24, 2008 | 1996 Jeep Grand Cherokee
44 people viewed this question
Usually answered in minutes!