Question about 2004 Chrysler PT Cruiser

Open Question

How to change evaporator 2001 pt cruiser - 2004 Chrysler PT Cruiser

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 958 Answers

SOURCE: Replacing Alternator For 2001 Chrysler PT Cruiser (Manual)

this instruction is general for all vehicles. i am sorry that i do not have particularly for your 2001 chrysler PT cruiser.

first, identify the alternator.
remove the fan belt on the alternator,
label and remove all wires that is attached to it.
remove all bolts that is holding it.
remove the old alternator.

do the reverse on installing it.

tnx 4 using fixya,

drcool

Posted on Aug 30, 2008

Ad
  • 290 Answers

SOURCE: chrysler pt cruiser fuel filter location?

Under vehicle, center, below seating area, mounted on top of fuel tank, in fuel pump module

Posted on Mar 27, 2009

localwonder
  • 6784 Answers

SOURCE: Change the thermostat on 2002 Chrysler PT Cruiser

Hi, i have put together a step by step guide that will help you with this replacement job. Make sure the vehicle is in a cool state before starting this job.


* Drain some coolant into a clean container until the coolant level is below the thermostat housing.
* Remove the upper radiator hose connection from the thermostat housing.
* Loosen the housing bolts and remove the housing.
* Remove the gasket and scrape it carefully from the surface of the housing and the mounting surface on the engine. If the gasket remains on either of the surfaces, there will probably bea coolant leak after reassembly. Some engines use a rubber O-ring to seal a thermostat housing.
* Compare the size of the thermostat to the old one. They are of different sizes, types, and temperature ratings.
* The temperature rating is stamped on the sensing bulb on the bottom of the thermostat. The temperature bulb faces the block.
* When replacing a thermostat, be sure that the thermostat fits into the groove in the block or outlet housing. If the thermostat is installed upside down, the engine will overheat.
* Install the gasket.
* Reinstall the thermostat housing. Refill the system and run the engine or pressure test to check for leaks.
* When the engine has reached operating temperature make sure the thermostat opens.
* You should be able to see coolant circulating within the radiator.
* Another way of checking thermostat operation is to feel the top of the radiator hose or use a thermometer or multimeter with a temperature probe to confirm that the coolant is warming up.
* If the engine is overheating, but the top hose is still cool to the touch, the thermostat is stuck closed and must be replaced.

NOTE
When a paper gasket is used and the recess is in the thermostat housing, it is a good practice to position the thermostat into the recess and glue the gasket to hold it in place. If it falls out of its groove during installation, the outlet housing can be cracked or a coolant leak will result. Before tightening the water outlet housing, try to rock it back and forth to be sure it is flush. Housings are often cracked during this step.


9c06de2.jpg

Posted on Apr 30, 2009

c17hydro
  • 2984 Answers

SOURCE: Location of powertrain control module on 01 PT Cruiser?

The PCM attaches to a bracket welded on the dash panel

2d254d5.gif

Posted on Oct 31, 2009

BCAS1298
  • 3092 Answers

SOURCE: replacing a starter in a PT. Cruiser 2001

Remove battery and battery support you'll be able to undo starter bolt's trough there and slip starter out.

Posted on Dec 08, 2009

Testimonial: "This didn't help, because you had to remove the engine structural collar under the starter to get at the starter bolt. It was more complicated."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How much coolant goes into the radiator of a 2001 pt cruiser?


Approximate coolant capacity.
2001 to 2002 Chrysler PT Cruiser: 7.2 qt (7 liters)
2003 to 2010 Chrysler PT Cruiser: 6.5 qt (6.2 liters)
Mar 4, 2015

Which coolant for a Chrysler PT Cruiser? - PT Cruiser Repair

pt.cruiser.repair/663/which-coolant-for-a-chrysler-pt-cruiser/
2001 pt cruiser Google Search

Jan 27, 2017 | 2001 Chrysler PT Cruiser

1 Answer

FLASHING DASH BOARD LIGHTS 2006 PT CRUISER


Change your dashboard light switch/dimmer. It either has a bad connection, or is faulty altogether.

Dec 04, 2013 | 2001 Chrysler PT Cruiser

1 Answer

Need a wiring diagram for 2001 pt cruiser


i have wiring digrams for 2001 PT Cruiser from Mitchell On Demand. Just need to know which specific part needed diagram for.
for example here is charging system for 2001 PT Cruiser
61384d5.jpg

Oct 09, 2010 | 2001 Chrysler PT Cruiser

1 Answer

2001 PT Cruiser: my 2001 pt cruisers check engine light will not co...


GET THE CAR SCANNED FOR ERORS ON ANY ELECTRIC PARTS THAT MIGHT B FAULTY OR BROKEN

May 17, 2010 | 2001 Chrysler PT Cruiser

1 Answer

2001 PT Cruiser: How too remove crankshaft pulley 2001 PT Cruiser...


GET A 3 SPOKE PULLEY EXTRACTOR AND SCREW IN THE BOLT BUT IN THE CRANKSHAFT HOLE PUT A MUCH SMALLER SCEW SO YOU WOUNT MESS THE INSIDE UP

May 17, 2010 | 2001 Chrysler PT Cruiser

1 Answer

2001 PT Cruiser Defogger Can't Be Set


sounds like your air intake knob is sticking
turn fresh air knob to allow fresh air then try and change the seting

Jan 23, 2010 | 2001 Chrysler PT Cruiser

2 Answers

Evaporator Coil R & R


Disconnect the battery, if you haven't already, and wait a few minutes. From there just take your time and don't force anything. The airbag needs electrical power to deploy.

May 09, 2009 | 2002 Chrysler PT Cruiser

1 Answer

Need picture of a 2002 pt cruiser engine


Free Repair Manual for 2001-2004 pt cruisers. It has tons of information with pictures. It saved me when i had to change my serpentine belt.

Nov 13, 2008 | 2002 Chrysler PT Cruiser

1 Answer

2000 PT CRUISER


How about the MAF sensor?

Oct 18, 2008 | 2001 Chrysler PT Cruiser

Not finding what you are looking for?
2004 Chrysler PT Cruiser Logo

Related Topics:

285 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...