Question about Pontiac Grand Prix

1 Answer

I'm in need of schematic to rebuild a m27 getrag 284 in my sons 1991 grand prix. purchased new bearings but found a piece loose in the bottom of the tranny case. trying to find where it goes. thanks for the help'.

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 83 Answers

There is a schematic in the Factory Repair Manual for this transmission. I repaired mine approximately 5 years ago, it was an easy thrust washer. I was able to find a tranny shop that had a used tranny for parts, because you can't buy any parts for these. I could not even cross reference the bearings.

Posted on Mar 27, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

4 Answers

How to rebuild rear caliper 2004 pontiac grand prix

its probably cheaper to just purchase another caliper but if you wish to rebuild the caliper you will have to google for the step by step instructions on how to do so

Jan 22, 2015 | 2004 Pontiac Grand Prix

1 Answer

2002 grand prix transmission

The transmission is probably worn out
& in need of a rebuild

Their only good for a little over 100,000
if the fluid is seldom changed since new

May 02, 2014 | 2002 Pontiac Grand Prix

1 Answer

99 grand prix making noise and cut my engine off while driving

as the knock get louder with acceleration, it indicates a bearing or camshaft lobe problem
you will have to check the history of the engine or the rebuild of the engine

May 15, 2017 | Cars & Trucks

2 Answers

Whats torque spec on front axle nut 2002 grand Am

284 ft-lbs. I dont remember the years but there is an updated wheel bearing form some suppliers. These will have an updated torque spec. If there was not a not in the box for the new bearing than 284 is the number. The updated bearing is 173 ft-lbs. Let me know if you have any questions and I'll do my best to answer them. Thank you for using!

Feb 14, 2012 | 2002 Pontiac Grand Am

1 Answer

My son has a 99 Pontiac Grand Prix, when he's driving it, it's making a knocking noise on the passenger side by the tire. Could it be a suspension or bearing issue?

Try turning the wheel and seeing if the knocking noise gets worse or better.Usually when you get a knocking like that or a clicking when your turning,you need to replace the CV shaft on that side.Sometimes a wheel bearing will make a click but if you jack up the car and can hold the wheel from top to bottom and can wiggle it and feel alot of movement that is the wheel bearing but it is probably the CV shaft making that knocking noise.Good luck

Aug 23, 2011 | Pontiac Grand Prix Cars & Trucks

1 Answer

GEprofile washing machine makes noise spinning,washes good

Well I'm not sure what it has to do with a 1997 Grand Prix but, you have a bad spin bearing on the bottom of the washer transmission. The bottom tub seals tend to leak and water runs into the bearing.

Jun 12, 2010 | 1997 Pontiac Grand Prix

1 Answer

Are the rear brake caliper pistons on a 1991 pontiac grand prix compressed with a c-clamp type tool or do they need to be rotated back in to bottom them out?

are they smooth faced? if so a C-Clamp/if they have some indentations in the face you need to screw these in with a homemade tool or for about $15 get a multi-purpose tool for many different vehichle brake piston types

Nov 10, 2009 | 1991 Pontiac Grand Prix

1 Answer

1991 pontiac grand prix se won't start

Probably need the computer reset. All these cars now days are set up for the dealer to screw you. The fix yourself is about history

Mar 16, 2009 | 1991 Pontiac Grand Prix

1 Answer

Tranny just stopped working 93 grand prix

Usually when this totally meltdown occurs and the fluid level is ok, its because of torque converter failure. i would rebuild asap if possible. its time for a new transmission. there may be a clog in the tranny filter but, i doubt it. this is usually a sign of massive gear damage and torque converter issues. i recommend a total rebuild

Mar 05, 2009 | 1991 Pontiac Grand Prix

1 Answer

Rebuild All or just Fix Heads

it is best to rebuild the whole thing, just the heads will put more pressure on the bottom end ,with that many miles and start leaks and could lead to bearings going out, it did happen to me in the past and a hard way to learn

Jan 04, 2009 | 2002 Pontiac Grand Prix

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

166 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts


Level 3 Expert

79186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides