Question about Chevrolet Lumina

1 Answer

I was quoted a $600 price for replacing the right front wheel bearing and hub on my 1999 Lumina. Is it always necessary to replace the hub when replacing bearings? Is $600 a fair estimate for this job? Thanks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 693 Answers

In my opinion that is to much . It is a lot of work but maybe around $300, I would shop around

Posted on Mar 19, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there a bearing or bushing on the shaft that the left axle slides onto on a 1999 Bonneville se?


i have been fooled by this one way to many times. when a wheel bearing or hub assesembly is making noise, it will sound like it is comming from the other side. i do not know why this is. but one test will prove if and which one. when growling noise occurs, notice, when turning left or right, does noise get louder and quieter as you turn? if so then it is wheel bearing. when turning left the right side will make more noise. when turning right the left side will make more noise. if always the same then, tires or transmission need addressing. the cv axle does not make a growling noise, unless front wheel drive car does not move, it makes a clicking or poping noise. sorry but at least you dont have to replace other axle

Sep 12, 2014 | 1999 Pontiac Bonneville

2 Answers

Burn out bearings and hub on front end of a 2008 4x4 Chevy Tahoe


-Due to uneven bore or bearing itself. Or not grease.
-Remove the hub and take closed look (Inspect for any sight or worn out)

-I'll recommend replace new hub and new bearing .

mai

Apr 10, 2013 | Cars & Trucks

1 Answer

How to replace front wheel bearing on 2003 kia sedona


Disassembly 1. Remove oil seal from front wheel hub. 2. Remove front wheel hub assembly with suitable tool.

bi6c021a.gif 3. Remove retaining ring. note_icon_eng.gif If the bearing inner race remains on wheel hub, grind a section of inner race until approximately 0.020 in (0.5 mm) remains. Remove race with a chisel.

bi6c021b.gif 4. Remove wheel bearing with suitable tool.

bi6c021c.gif note_icon_eng.gif Do not remove dust cover unless necessary. Do not reuse dust cover if removed. 5. Mark relative positions of dust cover and knuckle for proper reassembly. 6. Remove dust cover with a chisel.

ai2a023c.gif note_icon_eng.gif Do not remove wheel hub bolt unless necessary. Do not reuse wheel hub bolt if removed. 7. Remove wheel hub bolt with a press.

bi6c021d.gif Assembly 1. Press in new wheel studs. note_icon_eng.gif Front wheel hub press in either bolt turning or loosening by the torque of 108.5 lb•ft (147 N•m, 15 kg•m) shall not be premissible.

bi6c022a.gif 2. Mark new dust cover to match the removed dust cover. 3. Align mark on new dust cover with knuckle. 4. Install new dust cover with suitable tool.

bi6c022b.gif 5. Install new wheel bearing with suitable tool. 6. Install front wheel hub assembly with suitable tool.

bi6c022c.gif note_icon_eng.gif Use a new oil seal, and apply grease to seal. Install oil seal so that it is flush with knuckle. 7. Install new oil seal with SST(0K993 331 016).

bi6c022d.gif

Jan 12, 2013 | 2003 Kia Sedona

4 Answers

I have a loud humming sound coming from what sounds like the front right wheel. I jacked it up and checked the wheel for play. and there is no movement. but the humming is getting worse. its not the...


Unfortunately you do not always get "play" in the bearing and they are unserviceable. Replace the entire unit. Here are the instructions for replacement. They bolt into place making it pretty easy to do. Soak the CV shaft which pertrudes from the hub where the nut goes with a good rust penetrant to ease in removal.


Removal & Installation


  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Remove or disconnect the following:

    Front wheel Wheel Speed Sensor (WSS) electrical connector Brake caliper and bracket Rotor Driveshaft nut
  3. Install a front hub removal tool to the wheel bearing/hub assembly with three wheel nuts. Use the tool to push the driveshaft out of the wheel bearing/hub.
  4. Remove the wheel bearing/hub assembly and discard the bolts.

To install:
  1. Install or connect the following:

    Wheel bearing/hub assembly using new bolts and torque them to 96 ft. lbs. (130 Nm) New drive shaft nut and torque it to 118 ft. lbs. (160 Nm) Brake rotor Front caliper with the bracket WSS electrical connector Front wheel

May 16, 2011 | 2003 Chevrolet Impala

3 Answers

Noise in front wheel suspect inner bearing. can a backyard mechanic attempt this repair? Shop on the corner gave estimate of $240 saying this is a pressed in bearing


The front wheel bearing is a multi-piece hub type of bearing, and the hub assembly does have to be pressed back together if you want it re-assembled correctly, and I have seen people try and use a drift and hammer to replace that bearing and all that they managed to accomplish was to cause even more damage and had to also replace the hub flange. You can save a lot of money by removing the entire steering knuckle/hub assembly from the vehicle, and take it and a new bearing to a machine shop, and they will usually not charge very much to press that bearing for you, then all you have to do is simply replace the steering knuckle/hub assembly.



3ee599d.jpg

Sep 17, 2010 | 1999 Hyundai Sonata

1 Answer

FRONT WHEEL BEARING NOISY


Most likely it is a Hub bearing worn out. If you have access to a highway with a sweeping curve the outside tire turns faster than the inside tire following the curve. So if the noise increases on a left curve, the right side is bad. If the noise increases on a right curve, the left bearing is bad.

You did not state whether you have 4 wheel drive or 2 wheel drive.
The 4 wheel drives have the Hub bearing. Check around for parts prices. The price can vary by $100 from store to store. If you have the 2 Wheel version it is much cheaper to replace and you will need a wheel bearing seal.

Do spend a little time checking the other components in a 4x4 as the additional components can also make noise.

Jul 12, 2010 | 2004 Ford Expedition

2 Answers

Front differential bearings need replacing


No they will need replaced. But it should in no way cost that much. You should be able to get both replaced for about 500-600

Aug 20, 2009 | 1999 Jeep Grand Cherokee

1 Answer

Directions replace front wheel bearings on a 1985 nissan stanza?


996fb79.gif

NOTE: After the wheel bearings have been removed or replaced or the front axle has been reassembled be sure to adjust wheel bearing preload. Refer to the Adjustment service procedure below. On the 1989–92 240SX there is just one wheel bearing, pressed into the hub and no adjusting cap. Refer to the exploded views of the Front Axle Hub Assembly. Review the complete service procedure.
  1. Raise and support the vehicle safely.
  2. Remove the front wheels and the brake caliper assemblies. NOTE: Brake hoses do not need to be disconnected from the brake caliper assemblies. Make sure the brake hoses are secure and do not let caliper assemblies hang unsupported from the vehicle.
  3. Work off center hub cap by using thin tool. If necessary tap around it with a soft hammer while removing.
  4. Pry off cotter pin and take out adjusting cap and wheel bearing lock nut.
  5. Remove wheel hub with disc brake rotor from spindle with bearings installed. Remove the outer bearing from the hub.
  6. Remove inner bearing and grease seal from hub using long brass drift pin or equivalent.
  7. If it is necessary to replace the bearing outer races, drive them out of the hub with a brass drift pin and mallet.
  8. Install the outer bearing race with a tool (KV401021S0 special tool number) until it seats in the hub flush. NOTE: Place a large glob of grease into the palm of one hand and push the bearing through it with a sliding motion. The grease must be forced through the side of the bearing and in between each roller. Continue until the grease begins to ooze out the other side through the gaps between the rollers. The bearing must be completely packed with grease.
  9. Pack each wheel bearing with high temperature wheel bearing grease. Pack hub and hub cap with the recommended wheel bearing grease up to shaded portions. Refer to the illustration.
  10. Install the inner bearing and grease seal in the proper position in the hub.
  11. Install the wheel hub with disc brake rotor to the spindle.
  12. Install the outer wheel bearing, lock washer, wheel bearing lock nut, adjusting cap, cotter pin (always use a new cotter pin and O-ring for installation after adjustment), spread cotter pin then install the O-ring and dust cap.
  13. Install the brake caliper assemblies and bleed brakes if necessary. Install the front wheels.

Jun 23, 2009 | 1985 Nissan Stanza

1 Answer

Replacing front wheel bearings on a 1999 honda accord


there is a hub and a bearing assembly...usually you need to press the bearings into that hub...need a press to push out the old and press in the new...i replaced mine last year by going to the junkyard and taking out the hub and bearing assembly and just putting the whole thing into my car...much simpler..plus you learn how it goes together by taking it out in the boneyard..no press needed...plus if its genuine honda parts from a honda..(you can match the markings) its likely to be a very good part for a long time. Being used isn't always a bad thing as far as honda parts are concerned.This is from my own experience hope this helps you.

Mar 12, 2009 | 1999 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...