Question about 2000 Pontiac Sunfire

1 Answer

Hazard lights do not work fuse good how to replace hazard relay

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 236 Answers

If you will look under teh dash at your fuse panel you cannot miss the round relay

Posted on Mar 19, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Acura 1998 RL blinkers and hazards not working? Replaced Blinker hazard unit under dashboard in fuse box. Still no blinkers and hazards. All other lights work fine.


Have you checked to see if your fuses are good ? If they are, you may want to check power at the switch and then at the relay. Might have a pinched wiring somewhere.

Dec 23, 2016 | 1998 Acura RL

1 Answer

2001 4 Runner blinker problem


The hazards use a separate relay. listen for signal relay clicking to locate the correct relay. Consult your owners manual for fuse and relay layout.

May 26, 2017 | Toyota 4Runner Cars & Trucks

1 Answer

Rear lights not working on 2002 suzuki grand vitara


In the underdash fuse/relay box, the 15A TAIL fuse feeds power to the coil of headlight relay 2. When the combination switch is set to TAIL, the relay closes and the outer tail lamps light. In the same underdash fuse/relay box, the 20A STOP fuse feeds power to the brake light switch. When the brake pedal is pressed, the inner brake lamps light. The underdash fuse/relay box also contains the 10A TURN BACK fuse which feeds power to the hazard switch and the turn signal relay. Relay output is fed to the combination switch and turn signal power is applied to the selected middle tail light. The fourth fuse in the underdash fuse/relay box is the 15A HAZARD fuse which feeds power to the hazard switch and turn signal relay. When the hazard switch is set, the turn lamps on both sides begin flashing.

Sep 18, 2012 | 2002 Suzuki Grand Vitara

1 Answer

Where is the brake light relay on a 1995 chevy van G20


brake light dont have relay only fuse brakes are hot at all times on gms. in goes from fuse to brake pedal switch to hazard turn signal switch then to brake lights. ck fuse if good go to pedal switch if good go to turn /hazard switch the turn signal hazard brake all use same wire to lamps.

Aug 04, 2012 | 1995 Chevrolet G20

1 Answer

What's your problmy turn signal light and hazard lights went out on my 2007 suzuki forenza fuses are still good em?


The Hazards and flashers both work off the same "combination relay, it is defective, replace it.

Feb 08, 2012 | 2007 Suzuki Forenza Sedan

1 Answer

1998 taurus - turn signals were working - pushed the hazard lights button - hazards did not work and also now turn signals do not work


Check the fuse/relay panel for a blown fuse/relay. Also look at the turn signal flasher and the four way flasher located in fuse/relay panel for problem. If the fuses are good replace the flashers to correct the problem. Hope this will help you.

May 20, 2010 | Cars & Trucks

3 Answers

1986 oldsmobile ciera, signal lights just stoped working, no indicator light on dash even. hazards still work, fuse is fine and relay for hazards was replaced. seems all bulbs are good as well??


there should be a flasher under the dash looks like a metal can in fuse box if this is whst you call the relay then the switch is bad if not replace this it is a 552 flasher

Aug 05, 2009 | 1986 Oldsmobile Ciera

Not finding what you are looking for?
2000 Pontiac Sunfire Logo

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...