Question about Pontiac Grand Am

2 Answers

I HAVE A 2.4L DAT WONT START BUT WHEN I SPRAY STARTER FUEL IN THA CARB IT RUNS 4 A MIN OR 2 I HAVE CHECK THA GAS LINE 2 THA FUEL AND ITS GETTIN GAS 2 THA RAIL BUT NOTHING IS SPRAYING OUT THA INJETERS ETHER I HAVE THEM OUT AND HAVE TRY 2 STARTED IT AND NO GAS CUMS OUT OF THEM CAN SMEONE PLZ HELP

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I HAVE A 03 CAMRY 2.4L AND I GOT BAD GAS IN SIDE THE TANK, NOW MY CAR WILL NOT START SO I REPLACED THE FUEL PUMP AND STILL DOSE NOT START, I SEEN THAT THE INJECTORS DONT NOT SHOOT GAS...????

Posted on Apr 06, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 86 Answers

Your fuel pump isnt working, you can check this by taking the fuel cap of and turn the key to the start position have someone listen closely by the gas fill port you should here a humm or wine if you dont the fuel pump is bad and needs replaced

Posted on Mar 19, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Starter works fine engine wont start


CHECK BATTERY AND CONNECTION.

Feb 12, 2015 | Cars & Trucks

1 Answer

88 Suzuki Samurai idles fine but wont take gas?


check the carb main jets i just had that problem rebuilt the carb and fixed it. auto zone has rebuild kit for around 30 dollars easy to rebuild if you take a lot of pictures!! spray all the jets out with carb cleaner around 4 dollars

Dec 29, 2012 | 1988 Suzuki Samurai

1 Answer

Engine stalled out,would not start, pour gas in carb,cranks,keeps running,until idle falls below 12to1500rpm,than stalls out again and will not crank,repeat gas or starting fluid in carb,cranks runs and...


This truck is fuel injected, the problem sounds like a weak fuelpump, it runs when you pour gas into it until that gas runs out, the first thing is to test the fuel preasure, if the pump is weak it may run with gas poured into it but wont idle, also a common problem is the coolant temp sensor and the ground wires to thermostat housing bolt but i wont bet its the pump inside the fuel tank, if you put a fuel gauge on it there should be at least 55-61 psi if its a few pounds lower it can cause problems, you have everything else and it runs with gas poured so its a fuel problem check the preasure, theres a valve up top on the fuel line to connect a fuel gauge to it, start there hope this is helpful.

Dec 27, 2010 | 1993 Chevrolet C1500

1 Answer

Ran out of gas put in 4 gallons now wont start where is the carb on the 85 19oe gas? can i spray starter fluid somewhere to make it kick?


190e doesnt have a carb. BENZ e models are equipped with fuel injection and an on board computer. your problem is probably the fuel governor or the fuel accumulator.the former is bolted,either an ordinary screw or torx screw,beside the fuel distributor,while the latter is placed under the car's flooring clamped together with the fuel filter and pump.

Sep 03, 2010 | 1985 Mercedes-Benz 190

2 Answers

1987 jeep wrangle will not start or run


Uncouple the fuel line coming from the pump at the carburetor, place a clean can under the line, and have someone operate the starter--you should have fuel shoot from the line in spurts as the engine turns. If it does, then the entry port on the carburetor is plugged. Remove the float assembly and pull out the float needle valve. Hook the fuel line back to the carburetor and try the starter again, there should be fuel pumping into the float bowl. If not, check to see if there is a filter on the fuel inlet path that may be plugged. If no filter, remove the float needle seat to see if something is blocking the fuel passage. If all else fails, use compressed air to blow backwards through the needle seat (remove the fuel line again). Hope some of this helps!

Feb 20, 2010 | 1987 Jeep Wrangler

1 Answer

My 1997 Chevy Lumina won't start, it sounds like it wants to but it wont turn over, has gas, tried the carb spray, still won't start. Help!!!


did you use carb cleaner or starter fluid. if you try starter fluid and it starts for a second and then dies you might have a fuel pressure issue. if not check for spark.

Jun 18, 2009 | 1997 Chevrolet Lumina

1 Answer

CAR WONT STAY RUNNIG


is it fuel injected? you might have a faulty sensor it sounds like a vapor lock, also you fuel injectors might be dirty or bad also check fuel pump pressure or a cloged fuel filter, or it is putting to much gas if your vette has a carb.

May 31, 2009 | 1990 Chevrolet Corvette

1 Answer

Wont start after 6 mos. I changed the spark plug, drained & added fresh gas, checked the fuel filter... Kicks over fine. Ran for 4 seconds, then it died. Always ran & started great before.


With a new plug and fresh gas it should start. Check to make sure there isn't a kill switch turned off or that the gas petcock from the tank to the carb is on.

How did you check the fuel filter? Disconnecting it from the fuel line that goes to the carb is the best way, making sure the gas is turned on under the tank. Bleed off a little gas into a can or something just to make sure the filter isn't plugged.

The last thing I'd do is take off the air filter and spray a little starting fluid in the carb. It may start and run several times if there is old gas in there somewhere. Remember the bowl on the carb is probably still full of old gas. After some fresh fuel reaches the plug it should start and continue to run.

(You might drain the bowl on the carb of ols gas before you go any further)

Good luck!

Sirwriter

May 22, 2009 | 2006 Honda Civic Hybrid

2 Answers

Hard to start and smell gas


have 1994 4.3 cpi and the problem I had sounds same.
It was a leaky pressure line in pletium . easy fix $45.00 part $15.00 gasket.
the leak was caused from the fuel lines rubbing together in pletium.
take the vortec cover off ,then remove air regulator in middle and look inside . I turned on power to key and gas spray came from drivers side of pletium looking in hole.fuel line side. if gas spray on passanger side then gas regulator faulty. takes 5 min to check
After fixing truck runs runs great. no more gas smell in cab.
also you can smell oil for gas

Feb 02, 2009 | 1995 Chevrolet Blazer

1 Answer

Try to start my 95 dodge dakota and it won't start


dont take carb off, drain fuel from tank if you got bad gas, fill with good gas, pull fuel line off carb and turn on key if have electric fuel pump, this will clean out line. get a spray can of carb cleaner from auto store and spray carb. hook up fuel line and try to start, should clean out carb with fresh fuel

Dec 31, 2008 | 1995 Dodge Dakota

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

187 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...