Question about Ford Mustang

1 Answer

I need to remove the complete rear seat from my 1978 Ford Pinto. I need Help!! Thanks, Nick

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 6,982 Answers

If I remember correctly, the bottom part of the seat is on a hook (one on each side under the seat) To remove it, you push the bottom edge of the seat back and up is one motion. If you use a flashlight, you can slightly lift the seat and look underneath to actually get a look at the hooks.
Once the bottom has been removed, usually there are two bolts that hold the back on and possibly another hook at the top that you need to lift up on the back to disengage.
If I'm wrong, the hooks will be bolts and the bolts just need to be removed.(you will see that if you look)

Posted on Mar 19, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the torque spec for a 1978 Ford pinto differential pinion nut?


170 ft.lbs is the minimum; be aware that this differential uses a crush sleeve to set the backlash and the pinion torque is what crushes the crush sleeve. If you don't set the backlash correctly you can grind up your differential gears.
8 Inch Ford Rear End Torque Specifications eHow

Feb 02, 2015 | Ford Cars & Trucks

1 Answer

Is there a universal radiator that will work for a v6 1978 ford pinto


Call a radiator near u they can help they that bad machine going

Jun 03, 2014 | Cars & Trucks

1 Answer

2001 mustang convertible. How do you remove the rear seat to access the motor or pump ot check oil level? Thanks, Bruce


The seat bottom is held in with 2 release buttons located left and right of the center of the seat. (see photo) push with a screw driver and lift, then pull the seat bottom forward and remove.


gozer.jpg
The rear seat back is help in place by 2 self tapping bolts on the lower left and right of the seat back near the floor, if I remember correctly you'll need a 10mm socket. Remove the 2 bolt and lift up to remove the seat back. When re installing the seat back do not over tighten the bolts they have a tendency to strip.

Aug 15, 2011 | 2001 Ford Mustang

1 Answer

Have a kit car with a ford 2.0 ltr pinto sohc,rev counter wiring


Most rev counters of this type wire the positive wire to the contact points on the distributer and the black (negative) to ground.

Apr 16, 2010 | 1978 Ford Granada

1 Answer

Oil leakage thru rocker cover if you exceed 3000 revs in a ford sierra 1988 2litre pinto


Make sure your PCV valve has vacum and working right, if not will have to much pressure in crank case and push oil out.

Dec 28, 2009 | 1978 Ford Granada

2 Answers

Carb adjustments for a 1970's Ford Pinto 2.3 liter 2barrel engine


I have the Petronics electronic distributor kit for that motor ,jkjhenry@cox.net

Sep 15, 2009 | 1983 Ford Escort Gt

1 Answer

Mustang rear seat removal?


please rate highly if this is what you need

Section 01-10: Seats and Tracks 1994 Mustang. Workshop Manual
REMOVAL AND INSTALLATION Seat Cushion, Rear Removal and Installation
  1. Release pin from locks by pressing release button under rear seat cushion.
  1. Pull rear safety belt and buckle (60044) through openings in rear seat cushion pad and frame (600A88) and remove rear seat cushion pad and frame .
  1. To install, reverse Removal procedure.
----------------------------------------------
Section 01-10: Seats and Tracks 1994 Mustang. Workshop Manual
REMOVAL AND INSTALLATION Seat Back, Rear Sedan
Removal
  1. Remove rear seat cushion as outlined.
  1. Remove rear seat bolster. Refer to Section 01-05 .

  1. Remove rear seat bolster mounting bolts. Remove bolster assembly.
  2. Remove four seat back to package tray retaining bolts.
  1. Remove seat back.
  1. To install, reverse Removal procedure.

May 04, 2009 | 2004 Ford Mustang

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75824 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...