Question about Jeep Wrangler

1 Answer

3rd Brake light (over tire) not working. I put in a new bulb and cleaned contacts still nothing. Other brake lights work so I dont believe its a fuse. Any ideas??

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 504 Answers

Check for broken wires in door loom

Posted on Mar 19, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake light problem


Make sure you have the right bulb. I've seen several times where the wrong bulb was installed.

Apr 08, 2016 | 2007 Lincoln MKZ

2 Answers

3rd brake light not working!


Hi, try to locate the power source for this light,Test the light from this end, possibly may be a loose fitting or could have unplugged. Best of luck.

May 04, 2014 | 2003 BMW 325

2 Answers

My break lights dont work.fuzes and bulbs are ok ?


For starters it is spelled "Brake" light...LOL . Sounbds like you may have a brake light switch that has gone out. In yor owners manual does it show more than one fuse for the brake lights? Most vehicles with a thrid/highmount brake light split the brake light power to either the left and third brake light and the right brake light or vice versa, or posibble 3rd brake light on its own fuse. I would check if all of the brake light including the 3rd brake light dont work. If no lights work at all it leans toward the switch which controls all or them to activate hence the brake light switch. It should be mounted on your brake peal arm or to the main base. The pedal lever activate the switch when you depress the brake pedal.

Oct 07, 2012 | 2003 Chevrolet Silverado 1500

1 Answer

The 3rd/high brake light is not working .. replace light bulb with a new bulb. nothing happened. checked to see if fuse is good couldnt find it.. besides the fuse what could be the problem.. 2001 gmc...


Brake light switch. If I remember correctly, the third brake light works off a seperate circuit from the other brake lights so part of the switch could be bad.

Aug 23, 2011 | GMC C1500 Cars & Trucks

1 Answer

I recently replaced the front rotors, brake pads and master cylinder in my 2003 Durango. I've since discovered that the brake lights are not working, including the 3rd brake light in the tailgate. I...


Hello, Well there is not much more it could be unless you have a shorted wire or a burned fuse. I would normally think that the turn signal canceler was bad but the 3rd brake light will still work if that is bad so I would check all fuses and for bare or shorted wires.

Jan 18, 2011 | 2003 Dodge Durango

2 Answers

Brake light issue


check the fuses. also check for a bad ground.

Dec 13, 2009 | 1991 Buick Regal

2 Answers

No brake lights


CHECK MULTI FUNCTION SWITCH.(TURN SIGNAL SWITCH) SOMETIMES THE 3RD BRAKE LIGHT WILL WORK BUT NOTHING ELSE

Mar 22, 2009 | 2001 Saturn S-Series

1 Answer

Brake lights dont work untill i turn the lights on, then stay on


Hi, are the tail lights and the brake lights in the same light unit?
If so, there is a possibility the bulbs are in the wrong way. If it is a stop/tail bulb then there are two locating pegs on the side of the metal part. If you look, one is higher than the other which has to locate into the correct slot in the holder.

Another possibility is the bulb is wrong, there are double and single contacts. Check the contact on the base of the bulb is the same as the contacts in the holder.

TL

Feb 09, 2009 | 1999 GMC Yukon

1 Answer

3rd brake light won't work. Replace bulb...nothing


The contacts for the third brake light are two silver discs, about the size of a dime. They are located on the inside of the tailgate, hinge side. Make sure your carpet or any other loose item has not covered one or both contacts. Make sure they are fairly clean and make good contact.

Nov 29, 2008 | 2001 Jeep Wrangler

2 Answers

Brake lights dont work


i have a 1999 malabu and my brake lights went out i checked all fuses and changed all the bulbs and i also have no tail lights what could it be.

Jun 06, 2008 | 2005 Chevrolet Malibu

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...