Question about Chevrolet Chevy

2 Answers

I Have Resotred A Chevrolet Truck These are the Details on Plate General Motors Holden Ltd Chassis Truck Engine No TR3358669 Chassis No 2685 Body Allowance 1205 Lbs Load 3360 Lbs Gross 7400 Lbs I think That this is a 1929 or 1930 This Vehicle has been in Australia all the time apart from when it was imported from the USA I can email photos if required , I wish to confirm the year of manafacture Thank You Regards Ian Castles Fiveways victoria Australia

Posted by on

  • icastles Mar 19, 2011

    I would like to be able to identify the year of manafacture of this Chev Truck from it,s Chassis number, I wish t thank the advice in relation to the year the engine was stamped as 1929.. This truck was sold in Australia, it did not have a cabin, They were sold Chassis Gaurds bonnet or hood back to the firewall, The purchaser had to supply and fit their own Cabin..
    Thank You Regards
    Ian Castles
    Australia
    icastles@satlink.com.au

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,865 Answers

Hello icas.... here is a link that may answer your questions http://www.parts123.com/PartFrame.asp?ZTM=cadeflka&GHOME=www.obschevy.com&TITLE=Obsolete_Chevrolet_Part_Co

Joe

thanks for choosing Fixya!

Posted on Mar 19, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 11,800 Answers

All i can say from the chassis is that it's made in the late 20s. The motor serial was stamped in 1929. Sorry, i can't be more precise, the data files that i have is extremely limited for those years .
Try this site http://oldholden.com/ they might be able to help you more

Posted on Mar 19, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the ingine number and chassis number located on a 1993 Holden barina 5 door hatch


You are Australian right? I can tell this because you write 'ingine' which is how you say it and you drive a Holden :-)

Engine number will be on a flat machined area of the engine block. VIN number or Chassis number should be on the dashboard where it joins the windscreen in a slight recess. It should also be stamped into the drivers side door sill.

Oct 02, 2015 | Holden Cars & Trucks

1 Answer

How to connect spark plugs on Isuzu kb 2.4 petrol 2007 model


pulled the coil pack wires, (not doing them 1 by 1)oops
now its timed wrong. (this?)

what country, ? this is USA forum. and we dont have KB here.


so.... and what exact engine, (true name)
why not first say what you are (were) attempting?
we dont have KB Pickup trucks here, so not posting country on a USA forum, invites wrong answers or wild useless guessing.
what engine do you have, 2.4L , they have many types at that displacement.

this truck?
in the General Motors plant in Port Elizabeth.

that will make finding engine parts more easy
and how to time it.


here are my 2 ideas on engine in your car
The 2,405 cc (146.8 cu in) version has a 87.5 mm (3.44 in) bore and a 100 mm (3.9 in) stroke.

C24SE — 2.4 L SOHC – Isuzu Rodeo (C24SE built by Holden)
X24XF— 2.4 L MPFI SOHC 8V FlexPower


the X24XF ,is my guess, am I correct>
?

Apr 02, 2015 | Isuzu Cars & Trucks

1 Answer

Diagram timing chain holden rodeo 2007


double posted
this a jeep?
what engine EXACLTY?
#cylinders, and displacement. ???????
what country? we cant guess this.
its no jeep, at all, not even in the ball park.....
my wild guess is its really and Isuzu engine.
find real engine , maker and designation, and fixing it is much easier.
Get an FSM from your dealer?




data. quote
The Holden Rodeo is a utility vehicle (pickup truck) that was sold in Australasia (Australia and New Zealand) by Holden, a General Motors (GM) subsidiary. Introduced in 1980, the Rodeo was built by Isuzu over three generations, but in 2008 was renamed Holden Colorado.

Jan 27, 2014 | Jeep Commander Cars & Trucks

1 Answer

Where is the engine number of a subaru sambar truck located


hello.
i need to know where is the chassis number plate located on sabaru sambar in 2007 model?

Mar 18, 2013 | Cars & Trucks

1 Answer

Where is the chassis number stamped on a 1977 lx holden torana


the chassis number will be located on the right hand side on the chassis rail .look at the top plate back from the right headlight.

Aug 19, 2012 | Holden LX Cars & Trucks

2 Answers

I need a photo of the spark plug wiring oder on a 1979 chevy silverado with a 308 engine


Wow, a reply about an Australian based engine. I'm thinking since there is no reply that he just may have a US based engine just posted the wrong size. in which case this might help.
Here is a website with the American Version of Chevy info


1.8.4.3.6.5.7.2 distributor rotation clockwise

http://boxwrench.net/specs/chevy_sb.htm


Great Stocking Stuffer for a Gearhead!
Small Block Chevy V8
267, 305, 327, 350, 400 cid.
Firing Order
v8_18436572.gif Cylinder Numbering Distributor Rotation gm_cyln_1357.gif v8_dist_ro_c.gif Rotor Under Cap Spins:
Clockwise

Aug 05, 2010 | 1983 Chevrolet Silverado

1 Answer

Code p 1870 comes up at emissions need help getting it off. Truck runs fine


Diagnostic trouble code P1870 (Transmission Component Slippage) is a General Motors-specific code whose set parameters are determined by transmission type and engine size. The PCM monitors and compares engine speed to vehicle speed after the converter clutch has been commanded ON in either high gear or Overdrive. Should the expected rpm ratio exceed predetermined parameters, DTC 1870 sets. And upon doing so, the PCM elevates the transmission main line pressure and stops converter clutch apply.

Jun 16, 2010 | 1999 Chevrolet Silverado 1500

1 Answer

Just brought a 1984 Holiday Rambler Imperial RV. What 454 engine manual would you buy for it.


General Motors Light Duty Truck service manual;
This was built as a chassis model only when made

Jun 06, 2010 | 1984 Chevrolet Chevy

2 Answers

01 malibu ignition switch will not turn/ are no details damn key will not turn


The lock tumblers inside the key lock cylinder have jamb up causing the key not to turn. Since the tumblers are made of brass they are no longer usable. As a retired locksmith I can tell you this is fairly a simple repair. The key cylinder is mounted on the dash which is the easiest removal on any car made after 1967. Go to any General Motors dealer and get a replacement part. The dash plate trim will need to come off to gain access to remove the lock

May 08, 2010 | 2001 Chevrolet Malibu

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...