Question about 1994 Dodge Dakota Club Cab

2 Answers

Hey i got a 95 dodge dakota 4 cyl and a 93 dodge dakota i want to put the 6 cyl in the 95 would i have to change wire harness

Posted by on


2 Answers

You own both, so you can look them both over

I think you already know the answer

Does the 95 4cyl have a wire harness for
6 injectors. If it does I will send you a check

Posted on Mar 19, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 381 Answers

Yes, you would have to change the entire harness and engine computer cause a 4 cyl computer will not run a six cyl

Posted on Mar 19, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What is order by color to airflow sensor 93:Dodge dakota 5.2'itr

Simple match up the colors of each wire but look for closely as some wires may for example be white and the other may be white with a black stripe on it. Just an example for all wires just be sure they match up with coordinating color. Good Luck.

Apr 18, 2018 | 1993 Dodge Dakota

1 Answer

I have a 93 dodge dakota i put a 98 360 in it and now i need all the wiring to hook everything up please help

You're not going to get a satisfactory answer to your problem. In 1996, Dodge (and most manufacturers) went to the ODBII standard to be in compliance with Federal emissions standards. That means that the 1998 engine will have to be an engine only in your 1993 Dakota. No multiport fuel injection with a PCM to regulate injector pulse, ignition, timing, etc. Or anything else that is controlled by the PCM (air conditioning, etc).
Your options are to connect what works from your 1993 engine wiring harness, and replace any items that have no connection. Or you can try to adapt your 1993 truck to the 1998 engine harness, and use all the goodies that came on the 1998 engine. But you are going to need the expertise of someone VERY familiar with both generations of Dakotas. Good luck.

Oct 24, 2016 | Dodge Cars & Trucks

1 Answer

What type of transmission fluid should be used in a Dodge Dakota, 2wd, auto trans, 6 cyl

Dextron plus 4 should be used. 4 quarts for service, 8.6 quarts for total refill. Some models have to be checked in neutral not park. Read dipstick to know for sure.

May 21, 2011 | 1988 Dodge Dakota

1 Answer

How is the master cylinder replaced on a 93 dodge dakota sport 4x4 6 cyl 3.9L

use a flare wrench and remove the two brake lines
then remove the the two nuts that hold it to the fire wall
then remove.
then remove the master cylinder reservoir because your
going to have to put it on the new one
drain out any brake fluid from it
in stall the reservoir on the new master cylinder
now you'll have to prime the new master cylinder
put the master cylinder in a vise and put brake fluid into it
now place your fingers over the two holes that the brake line go into
use a large phillips screw driver and push the piston in and out about 10 times
but do it slowly. make shore to keep your fingers over the brake line holes .
now install it back in
remember to bleed your brake system when your done

Nov 22, 2010 | 1993 Dodge Dakota

1 Answer

I need the owners manual for my 2003 Dodge Dakota sxt. Can you help or guide me in the right direction?

Need to know how to get to bypass hose to change on 2000 dakota, 3.9 6 cyl


Feb 21, 2010 | 2003 Dodge Dakota Club Cab

1 Answer

My 95 dodge 3.9 dakota stalls when put into gear Ithink my cranksensor is hitting flywheel

It could be hitting the flywheel but it sounds like you have a short in a wire possible the crank sensor . You really need to start the truck and reach behind the motor and start shaking and pulling on the wiring harness.The wires themselves to the sensor may be bad. if that doent work try starting in neutral the shift to drive, if it still happens remove the sensor and check for rub marks. If so shim sensor with small thin washers.

Jan 28, 2010 | 1993 Dodge Dakota

2 Answers

Changed Fuel Pump and now gauge does not work

you have messed up and not hooked the wires up for the gauge you have them reversed positive to negitive and vise versa common mistake for someone who does not do it for a living.

Jun 22, 2009 | 1995 Dodge Dakota

1 Answer

I put a 95 Grand Am Quad 4 dual overhead cam in a 93 GrandAm with a quad 4 single overhead cam in it can I change the wire harness and make it work.

Sometimes the manufacturers use the same main harness for multiple vehicles. Check part number with dealer on both harnesses. If they are the same, likely you will only need to change the engine harness & computers.

Apr 30, 2009 | Pontiac Grand Am Cars & Trucks

1 Answer

Instelled used wiring harness 1n 96 dodge 1500

this is for 96 ram 1500 with a 3.9 eng dont know where this 95 came in play thank you. ed

Mar 22, 2009 | 1995 Dodge Dakota

1 Answer

95 Dodge Dakota 4 Cyl Dies

try replacing the coil, my 2.5 did the same thing, and after changing plugs,wires,distributor,rotor,rotor button . the last thing i repalced was the coil and i have not had an issue since. all work was done about 6 months ago.

Jan 08, 2009 | 1995 Dodge Dakota

Not finding what you are looking for?
1994 Dodge Dakota Club Cab Logo

Related Topics:

249 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

81285 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides