Question about 2006 Hummer H3

1 Answer

We were driving down the street and my boyfriend accidently hit the button with the 4 the arrow pointing up and the lock on it, then while still driving hit the 4wd button. Now when we make a hard turn to park or in reverse its hard, and feels like something is rubbing or grinding. i dont know if pushing these buttons has anything to do with that issue? it wasnt doing that before they were pushed. if you can please tell me what i need to do. thanks

Posted by on

Ad

1 Answer

Go to a dealer or a trans shop, and have them
take it for a ride, as well as put it on the lift to check it

Posted on Mar 19, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1996 Chevy Blazer. A few days ago, I heard a clunking / grinding noise from underneath when I was turning. Sense, then it has gotten worse and got to the point that it was loud and vibrated the...


This truck should not be operated on the street in 4WD mode. You need to investigate the front axel CV axel shafts as well as the outer axel carrier bearings. Damage to front brake rotors and possible lock down while operating the vehicle. Safety hazard exist, so do not drive until axel and bearings are checked and repaired

Aug 23, 2017 | 1996 Chevrolet Blazer

1 Answer

2000 chevy blazer zr2 4 wheel drive proplem.


Check for a leaking vacuum control block to the front vacuum operated locking hubs

Sep 28, 2012 | Cars & Trucks

1 Answer

I have a 2004 dodge neon, 75,000 miles on it. Heres my scenario first, I started my car up perfectly, put it in drive n drove down the street, I hit a light, turned right down a road and my car made a...


I would probably start by removing the wheel and the drum and talking a peak. It should be pretty obvious. Let me know if you have any questions and I'll do my best to answer them. Thank you for using FixYa.com!

Jan 25, 2012 | 2004 Dodge Neon

1 Answer

HEY GUYS MY 97 328I CONVERTIBLE WONT OPEN OR CLOSE THE TOP, AS RIGHT NOW IT IS IN CLOSE POSSITION BUT THE LIGHT KEEP ON BLINKING, i DONT KNOW WHAT TO DO ANY MORE COULD ANY BODY HELP ME?


Turn on the radio so the battery is engaged, or turn on the engine.

  • 2 Fold down the cargo partition in the trunk and lock it on both sides. If the cargo partition is not down, there will be no place in the trunk to store the convertible top.
  • 3 Press the convertible button forward to open the top. It's located under the circular control button on the consul. The button has a picture of a window with one arrow pointing up and another pointing down.
  • 4 Pull the convertible button backward to close the top.
  • 5 Use your key to open or close the top when you are outside of the BMW but still close to it. Press and hold the arrow button on top of your key to open the top. To close the top, press and hold the Lock button. The car does not need to be turned on to operate the top with the key.
  • Oct 25, 2011 | 1997 BMW 328

    2 Answers

    There is a triangle with exclamation mark inside a circle with an arrow pointing down


    This is a low tire warning light, check the air in your tires. Once the tire is at capacity and you drive on it, it will turn off.

    Mar 28, 2011 | Volkswagen Passat Cars & Trucks

    1 Answer

    How to set the clock on 2003 mercury grand marquis


    Push the RDS button on the Radio. The radio display will show "Set hour", then you use "Up and Down" Arrow key on the Radio face to scroll through the numbers. When you get to correct one, hit RDS again. It will lock in the Hour and advance to "Set Minutes" Then use Arrow key again and hit RDS to jump out of routine.

    Nov 13, 2010 | 2003 Mercury Grand Marquis

    1 Answer

    How to set the clock on a 2006 GMC Savanana just a AM/FM no CD no hour/min buttons


    as long as this is a factory radio am/fm only
    there are 3 large buttons marked 1-2 3-4 5-6 they are preset stations
    below there is another big button under the 5-6 preset
    will have HR-MN an arrow pointing down under the HR an arrow pointing up under MN
    HR hour MN min. PUSH AND HOLD HR to set hour and PUSH AND HOLD MN to set min. KEY ON OR OFF
    hope this helps

    Mar 29, 2010 | 2006 GMC Sierra

    1 Answer

    Won't start


    that sounds like you have a loose ground cable or positive or both to the battery. there is also a fuel cutoff switch in the trunk behind the fabric. make sure you check this . generally in a rollover or accident the switch will trigger and the fuel stops killing the engine. hitting the pot hole could do this as well. make sure all your connections to the battery are clean and tight. hope this helps please rate this solution. thank you.

    Aug 29, 2008 | 1996 Buick LeSabre

    Not finding what you are looking for?
    2006 Hummer H3 Logo

    153 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Hummer Experts

    yadayada
    yadayada

    Level 3 Expert

    77499 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22306 Answers

    Brandon Johnson
    Brandon Johnson

    Level 2 Expert

    251 Answers

    Are you a Hummer Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...