Question about 1990 Jaguar XJ6

2 Answers

I am in NB and lost my only key, can you help?

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 158 Answers

Good day,

The frantic truth of the matter is that the manufacturer who built your car are the only who are in the best position to produce another key for your jaguar.
This is because the new key has to be programmed in such a way that it will have total control of all the security system, locks and ignition in your vehicle so that there won't be problems with your security system in the nearest future.

Another car dealer might generate a key which might control the ignition and few locks but believe me you will have problems with your security system sooner than you expect.

So the solution is to contact your manufacture and request for the production of another key for your jaguar.it doesn't cost much.


Thanks for using fixya..

Posted on Mar 19, 2011

Testimonial: "Thank you, it's a 1990 so I don't think it has a security system though... I am going to try and get a hold of Jaguar on Monday."

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jaguar Master
  • 1,940 Answers

You will need to contact your local Jaguar dealer and give them the VIN number so that they can remake your key, or order you a new set of keys. You will need the VIN and proof of ownership(title) to get your new key.

Posted on Mar 18, 2011

Testimonial: "kjn;jnk"

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Kia key code


Hello! Which key code? To the radio? Please give us more info so we can help! Thank you!

Aug 13, 2014 | 2003 Kia Sorento

1 Answer

I have toyota d4d hice with 2kd ftv engine every morning engine not start qukily need more than 5 time start the key NB battery heater plug and starter is ok but every 1000 km need 1 litre engine oil ,...


My personal suggestion would be to go for these repair catalogs. I know this website www.reliable-store that i used to buy them from, and they have online it was very good manual. Go ahead, I bet.

Mar 06, 2018 | Toyota Cars & Trucks

1 Answer

HI NEED KEYCODE for the radio in 2003 FORD EXPLORER PLEASE


The code is usually specific to the radio and should be recorded in your car handbook/documentation.
if you no longer have this Ford dealer may be able to help.

Feb 09, 2018 | 2003 Ford Explorer

1 Answer

Cannot open the luggage compartment of the maserati quattroporte battery is dead


Use the cars ignition key, insert into lock next to boot/trunk manual release. NB lean on boot/truck lid as you turn key otherwise you run risk of breaking the key. Boot will open.

Dec 07, 2012 | 2007 Maserati Quattroporte Executive GT...

1 Answer

How to replace an ignition cylinder lock on a 1999 jeep grand cherokee


Hi,

1) Disconnect and isolate Negative (Ground) battery terminal
2) Wait full 2mins for Airbag system capacitors to discharge (must disable airbag before working near steering column)
3) Insert key and turn to ON position (not start)
4) Release & remove cylinder barrel by pressing the release with a suitable tool (access through hole in the lower shroud)
5) Withdraw cylinder barrel from shroud and disconnect wiring loom from cylinder.

Installation of new barrel is the reverse of above.

NB: YOU MUST ALWAYS DISABLE THE AIRBAG FIRST !

Hope this helps...

Cheers,

Aug 15, 2009 | 1999 Jeep Grand Cherokee

1 Answer

Yellow engine sign on Vectra dash staying on, what does this mean


my key is not working i have to manually unlock it with the alarm going off and ive lost my manual for the code can you help

Apr 09, 2009 | 2001 Volkswagen Golf

2 Answers

MY NISSAN ALMERA KEY LOST AND I NEED THE CODE TO GET A NEW ONE


Contact a local nissan dealer and give them the VIN# and they should be able to help you

Feb 20, 2009 | 1998 Nissan Altima

2 Answers

I lost my contact key. Before, I make copy for my key. So this key can open dors, turn lights on but can't start the car. Please help me


you will have to go to dealer or locksmith because there is a chip built in key price can be between $35 to over $100

Oct 19, 2008 | 1996 Nissan Maxima

Not finding what you are looking for?
1990 Jaguar XJ6 Logo

Related Topics:

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

yadayada
yadayada

Level 3 Expert

79865 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...