Question about 1996 Chevrolet Silverado 2500

1 Answer

No low beam head lights - 1996 Chevrolet Silverado 2500

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Chevrolet Master
  • 680 Answers

Combination/multifunction (turn signal arm) on the column.

Posted on Mar 18, 2011

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

j_del
  • 1586 Answers

SOURCE: INOP low beam and high beams

The problem is the headlight switch itself - it's one of the most common failures on these cars. The part, brand-new, is about $158 from ECSTuning.com. Replacing it involves removing the airbag and steering wheel - not difficult but a little nerve-wracking due to the power of the airbag.

If this is something you want to tackle on your own, reply back here and I can give you a step-by-step on doing the work yourself. Or you can go to a shop/dealer and just have them do it. They'll probably charge you at least two hours' labor, even though it's a 40 minute job. Let me know what you would like to do.

Posted on Dec 11, 2008

johnny5846
  • 379 Answers

SOURCE: replacing low beam head light on nissan altima

your welcome , glad to have assisted you

J5

Posted on Jan 21, 2009

  • 24 Answers

SOURCE: My low beams are not working but the high beams are

your Problem My be in the Dimmer switch take the care to advanced auto or auto zone ask the to do a code test on the car it's usely free if you have a pin plug under you dash they can pull up the code and tell you where the problem lies

Posted on Jul 26, 2009

  • 8 Answers

SOURCE: no low beam head lights

If you just want to replace the bulb yourself, this is a good website.
http://www.paulstravelpictures.com/Nissan-Altima-Headlight-Bulb/Nissan-Altima-Passenger-Side-Headlight.htm
If the website does't get your headlight fixed... You might have a blown fuse. It could be in the IPDM E/R location under the hood. This is next to the coolant bottle. Remove the coolant bottle with two screws and lift the cover to the IPDM E/R. Just set the coolant bottle aside for now. The low beam fuses are 49 and 50. They are 15A fuses. To be more precise, they are located on row 2, columns 2 and 3 (column 1 being closest to the fender of the car). Hope this helps.

Posted on Jul 20, 2010

  • 4977 Answers

SOURCE: Low beam head lights not

if the fuses are good then you need to check for power and ground at the headlight plug that attaches to the headlight bulb if you have a good power and ground there and the connections are good then the bulbs are both no good.or if you can tell the bulbs are burnt out by looking at them then you don`t have to check powers and grounds.you also can directly feed power and ground to the bulb and check both the terminals for high beam and low beam as you cannot tell which is which by looking at the terminals

Posted on Mar 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can adjust the low beam on my 2010 Impala but I can't adjust the high beam


low beam and high beam is in the one setting unless you have separate headlights
procedure is to place the car on level ground 3 feet from a wall that reflects the head light
draw a cross on the wall at the height of the center of head light lens
switch on the head lights (high beam)and you will see the center beam of high beam on the wall
using the screws at the back of the assembly adjust that spot to be pointing slightly to the left if rh drive ot left if lh drive and about 1 inch below the line that you drew on the wall
when you have that correct , it will put the low beam in the correct legal position
if the rear of the vehicle is sitting down , trailer of caravan on , the the head lights have to still be adjusted to legal setting

Oct 20, 2015 | Cars & Trucks

1 Answer

Lost power to low beam head lights


check fuses first.then check the bulbs low beams may be blown going over a hole in the road.

Dec 19, 2013 | 1989 Dodge Raider

1 Answer

2006 Chevy HHR low beams do not work in auto or on positions. However, low beams flash when locking/unlocking the car using the remote. Also, high beams, parking lights, and turn signals all work fine. All...


Your running lights which come on when you are in drive should be the ones flashing when you use the key FOB to lock or unlock vehicle not your head lights. Although unusual maybe both low beam head lights are burnt out or a bad ground, that the only thing that makes sense to me.

Nov 30, 2013 | 2006 Chevrolet HHR

1 Answer

2002 gmc safari head light won't work on low beam but will work on high beam


First check, is there more than one headlight bulb, if so, the low beam bulb has failed, needs replacing.

If not you'll probably find that the head light bulb has a double filament, low and high beam. The low beam filament has failed. You have to replace the bulb.

Dec 24, 2010 | GMC Safari Cars & Trucks

1 Answer

I have aproblem with my Buick Allure both low beam stoped working.The high beam works OK. Checked the fuses and there OK can you help


suspect low beam head light fuse, check fuse if ok suspect that both low beam head lights are burned out ( it happens) ,if ok suspect headlight dimmer switch.

Nov 16, 2010 | Chevrolet Avalanche Cars & Trucks

1 Answer

'99 ford escort head light will dim when


The wiring harnesses in the plugs behind the bulbs are burned up seperate rear of headlight cover and inspect parts available at your ford dealer

Mar 31, 2010 | 1999 Ford Escort

1 Answer

2003 hyundai elantra low beams not working but the high beams and parking lights are, why, help


its kind of uncommon but I have seen both Low Beams burn out at the same time,but first check to see if your vehicle has a separate relay for the high beams and one for the low beams if so replace the low beam one if that is not replace both head lights,and it that is not it the only thing left is the head light switch itself.Hope this helps good luck

Jan 01, 2010 | 2003 Honda Pilot

1 Answer

Head light low beam will not turn on


did you check low beam head light relay to make sure its working?

Aug 06, 2009 | 1992 Mazda MPV

1 Answer

Turn head lights on every light works except low beams


thare is a high beam relay and a low beam relay in the fuse box find the low beam relay and replace it. if this dont work its probabley the switch

Dec 31, 2008 | 2003 Ford Taurus

1 Answer

1999 Chevrolet Astro Van problem


the head lights have tree wires goig to it one groun one gets power when high beams on the 3rd gets power only with low beam on test the wires or try by plugin a good known head light to conector if it works with low beam then replace both head ligts because head light come with two bulbs in one high and low

Jun 02, 2008 | 1999 Chevrolet Astro

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8211 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...