Question about Hyundai Accent

Open Question

Code p0123 p1703 trasmissions shift bad and no over drive

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 6 Answers

SOURCE: trasmission dont take 3 shift n drive

check vss and TPS if they are okey check valves shift and wiring

Posted on Nov 22, 2009

  • 118 Answers

SOURCE: trasmission dont take 3 shift n drive

Try a transmission rebuild kit, "can b found on ebay" and have a local auto mechanic do the repairs. Sounds like the gears are not catching the discs must be worn or worse. Some times the repairs can seem pricey but in the end it is all worth it. I hope this solved your problem.

Posted on Nov 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error code P0123 and will not shift into OD


IDK if you have more than one problem. Code P0123: throttle position sensor/switch a circuit high input. Plausible causes would include, TPS not mounted correctly, TPS not properly adjusted, Wiring to the TPS is damaged (ground wire touching another wire), or the TPS sensor is defective. Your symptoms could be caused by an electrical or a mechanical failure. First repair this code and see if it fixes your driveability issue. Please write back and let me know how you are making out, good luck.

Mar 21, 2014 | Jeep Grand Cherokee Cars & Trucks

1 Answer

Codes p0203, p0123, and p0113 are showing for my 2001 jeep grand cherokee. The voltage from the tps plug was 1.5v


P0113 intake air temp voltage too high
P0123 Throttle position sensor voltage too high
P0203 is injector #3 control circuit
voltage is higher that 4.9 volts short to 5 volt supply circuit

erase the codes and drive vehicle to see if the codes come back if they do you have a hard code check the supply circuit for a short

Nov 11, 2013 | 2001 Jeep Grand Cherokee

1 Answer

2007 dodge durango p0123 and p0068


Code P0123-THROTTLE POSITION SENSOR 1 CIRCUIT HIGH and code P0068-MANIFOLD PRESSURE/THROTTLE POSITION CORRELATION. Without having the vehicle to properly test, and based on the information I have it sounds like your throttle position sensor has kicked the bucket. Replacing the sensor with a new one should solve your problem.

Nov 07, 2013 | Cars & Trucks

1 Answer

99 protege 1.6.when put car in reverse it engages harsh and o.d. light flashes and engine light comes on code 0123. tried a new t.p.s. sensor and had same problem


that is your 3 and 4 shift solenoid in the transmission. it is stuck open and needs to be replace. it is very easy to do.

Jan 03, 2013 | 2000 Mazda Protege

1 Answer

2008 honda fit error code P0756 44,00 orig miles


DTC P0756: Shift Solenoid Valve B Stuck OFF
Try changing your fluid if it's under warranty take to the dealer for repair. Usually this means the trasmission is going bad

Aug 14, 2011 | 2008 Honda Civic

1 Answer

Cold auto Transmission won't shift into 3 gear until after driving 1 mile or so (driving at about 35 mgh) pickup then downshifts from 3 to 2nd then back to 3rd a few times untill I get to work (7 miles...


Sounds like a bad speed sensor. Perform an ODBII scan soon. ECU should delay upshift until coolant temp senses warm up. It will not work right unless a signal is present from speed sensor.

May 22, 2017 | 1992 Mitsubishi Mighty Max

3 Answers

Question for a mechanic... My parents have a 2000 Dodge Durango, and it broke down acouple of weeks ago. They took to this mechanic, and he said that the vehicle is missing its "brain"?. My parents said...


I THINK THERES A POSSIBLE CHANCE THIS GUY MAY BE YANKING U AND YOUR FAMILY AROUND. I WOULD DEFINITELY GET A SECOND OPINION FROM A REPITABLE MECHANIC

Aug 04, 2010 | 2000 Dodge Durango

1 Answer

2005 Corolla's manual trasmission shifts gears, it clunks


hi mate , sounds like the SPIGOT bearing its a little bearing that allows the gearbox to be at a different seed than the engine flywheel and if this is in bad condition it will take the gearbox front shaft to a higher speed than comfortable for gearshift , in the meantime when you go for 1st or reverse gear just engage a gear like 4th without taking your foot off the clutch and then go for 1st or reverse, this will stop the gearbox spining long enough for a smooth shif, oNLY USE THIS METHOD WHILE STaTIONARY and see a professional when you get time.

Mar 29, 2010 | 2005 Toyota Corolla

2 Answers

Trasmission dont take 3 shift n drive


check vss and TPS if they are okey check valves shift and wiring

Nov 22, 2009 | 1999 Chevrolet Blazer

1 Answer

Santa fe


P0102 - Mass Air Flow (MAF) Sensor Circuit Low Frequency

P1702 TPS - Abnormal
P1702 TPS - Malfunction Adjustment
P1703 TPS - Low Input
P1703 TPS - Open/Short (Ground)

Sep 27, 2008 | 2001 Hyundai Santa Fe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...