Question about Chevrolet Tahoe

1 Answer

1996 chevy tahoe 4 w d 5.7l. recently replaced fan speed switch, resisitor and blower motor. worked fine for a few days and now nothing. all fuses are good. replaced resistor relay today. all ground starps are good but all i get is a clicking at the resistor. so i replaced it again and still nothing. thank you scott

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 447 Answers

Take a good look at all the connectors, especially at the blower motor switch and speed resistor. I find many of these connectors will be slightly deformed or melted from overheating and will not work even when plugged into a new switch or resistor...or may work for a bit then quit. If you find a bad connector the best thing to do is to replace the connector with a new one [they have to be spliced in] . Hope this helps and good luck!

Posted on Mar 18, 2011

  • Anonymous Mar 19, 2011

    plug was melted everything was spliced tight and shrinkwrapped. it worked fine for several days then just stopped. there is power at control switch and power at the purple plug on blower motor. brand new resistor and relay. still clicks at resistor

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Blower motor will not come on, motor is ok,fuses, resisitors are ok, only thing i havent checked is the actual fan speed switch/control, is this easy to check, any suggestions? thank you


Good troubleshooters at this point wouldn't waste the time to check it. You already know that the motor is ok, fuses ok, and resistor is ok. There is nothing else left, IT HAS TO BE THE SWITCH

Dec 11, 2013 | 2006 Kia Rio

2 Answers

Heater blower went out


Normally when the blower motor goes out it has trouble a few days before and cuts in and out so I would check fuses first but I may be wrong and if the fuses are fine the I would change the motor

Jan 22, 2013 | 2001 Honda Passport

3 Answers

I only get the fan to work on high speed, the lower speeds do not work


Hi!!
The Blower Motor Resistor also called Manual Temp. Control resistor), is fried, replace. The price with floor console $25 and without floor console $65. here is a pic.
87b9810.jpg

the resistor is located on the blower motor housing, fastened by two screws. It is the part where the electrical plug connects, the plug on the pic. goes to the blower motor.
A HELPFUL - 4 THUMBS rating for this solution would be greatly appreciated. Thank you for using FixYa.

Oct 19, 2010 | GMC Yukon Denali Cars & Trucks

1 Answer

2001 Chevy Tahoe with rear a/c - rear a/c quit


It is most likely not the blower motor. Intermittent operation usually means the blower relay is failing. It should be under the hood in the main fuse box. Try that before you spend a ton of money on bigger parts. Hope this helps. Good luck.

Nov 19, 2009 | 2001 Chevrolet Tahoe

1 Answer

Replaced the fan resistor on 2000 chevy malibu this summer. Worked fine but recently the blower won't work on any speed.


this could be a bad blower or the switch to blower,check at blower fan for power if no power it is most likely the switch.if there is power on all speeds then the blower is bad. check all fuses to verify.

Nov 17, 2009 | 2000 Chevrolet Malibu

2 Answers

1995 chevy tahoe blower problems


The inlet for the air may be clogged much like the filter screen on the clothes dryer. Also if your vehicle is equipped, there may be an cabin air filter that needs to be replaced. You local autozone/auto parts store should be able to tell u if the vehicle has that filter or not and where it is located.

Jul 18, 2009 | 1996 Chevrolet Tahoe

1 Answer

NEED TO REPLACE BLOWER RESISITOR. FAN ONLY WORKS ON HIGH SPEED


Under the dashboard on the passenger side you will see the blower motor. Near the blower motor inside the air duct is the resistor. It should be held in place by two screws. Hope this helps. Good luck

Apr 20, 2009 | 2004 Chevrolet TrailBlazer

2 Answers

A/C and Heater Only works on the highest speed


The blower motor resister is bad...It is very common in chevy trucks. The resister is located behind the glove box and is held in place by two screws, it will also have a wire harness attached to it. If you want to see a picture of it go to www.partsamerica.com and search for the blower motor resister.

Nov 25, 2008 | 2003 Chevrolet Tahoe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

285 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...