Question about 1996 Jeep Grand Cherokee

1 Answer

How do i take off wiper blade arm - 1996 Jeep Grand Cherokee

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 6,982 Answers

If you look at the base of the arm where it fits over the stub from the wiper transmission, you will see a stainless steel tab. swing that out to unlock it from the stub and carefully pull and rock it and it should come off. I know someone (KD?)makes a pry tool for that but chances are you won't need one.

Posted on Mar 18, 2011

  • Richard Scordino Mar 21, 2011

    Thanks for rating my answer "thanks for trying"...I wasn't "trying" that is exactly how you remove it!!
    (unless it's a rear...you did not say. Rear has a nut on top and usually gets really corroded on there. On therm, you can use a small puller and lots of wd40)

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Removing and replacing wiper blades


Typically, wiper arms terminate in a "J" shape at the end of the arm where it connects to the wiper blade.
Purchase new wiper blades the proper length.
Hinge the wiper arm up away from the windshield so it's sticking straight up from the car.
Rotate the wiper blade so that it's perpendicular with the arm.
Now press the wiper blade assembly so that it disengages from the hooked "J" bend in the arm.
Re-attach the new blades using the same procedure but in reverse.

Feb 20, 2015 | 2005 Opel Astra GTC

1 Answer

How to take off the rear windsheild wiper on a 94 grand cherokee


You will need a 13-inch wiper blade for the rear window. 1 - When removing the wiper blade lift the wiper arm away from the window. ----- 2 - With one hand holding the wiper arm press the small tab on the underside of the wiper blade where it meets the wiper arm. ----- 3 - Slide the wiper blade off of the arm by pulling the center toward the bottom of the arm.----- 4 - Lightly lay the wiper arm on the window.----- 5 - Prepare your new wiper blade by taking the curved part of the plastic clip and line it up with the curve of your wiper arm. ----- 6 - Lift the wiper arm and press it through the center of the wiper blade up and over the plastic clip. 7 - Pull the wiper blade up until it clicks. Place the arm back on the window.

Jan 11, 2012 | 1994 Jeep Grand Cherokee

1 Answer

I need to have 'step-by-step' instructions for replacing the driver side windshield wiper arm on my 2000 Ford Explorer. Can you help me with this?


  • Turn your wipers off, using the stalk on the left side of your steering column. Turn your ignition off and remove the key.

  • 2

    Pull the wiper blade up to lift it to the service position. Pull the front part of the blade down to position it at an angle.

  • 3

    Pull back the lock pin on the center part of the wiper blade (where it connects to the wiper arm). This unlocks the blade from the wiper arm.

  • 4

    Grasp the blade on each side and pull it down (away from the extended wiper arm) to release it from the "U" clip.

  • 5

    Repeat the process for the other wiper blade, if desired. Removing the driver's side and passenger's side wiper blade is the same.

  • 6

    Install the new wiper blade. Open the lock pin on the new blade, and then insert it into the wiper arm "U" clip. Close the lock pin and lower the wiper blade to its normal position.

  • Jan 29, 2011 | Ford Explorer Cars & Trucks

    1 Answer

    How do you remove a wiper arm off a 2007 g5.


    Hello,

    To remove the wiper arm of your pontiac g6, take a close look of the wiper arm, check the lower end and you will see a plastic cover covering the bottom part, you will have to apply force in pulling it up then you unscrew the screw that is holding the wiper down, then you lift off the wiper arm.

    Follow these steps:
    1. Align the rubber claw channel on the sides of the wiper blade element with the wiper blade claws in the wiper arm.
    2. Slide the blade element into the arm. Guide the element through each set of claws on the arm until the element snaps into place in the arm notches.
    3. Position the blade with the element facing up. Insert the hooked end of the wiper arm into the opening in the middle of the blade. Hook the end of the arm over the pin inside the blade and push it in securely until it snaps into place.
    4. Flip the blade around so the wiper element is facing the windshield and lower the wiper arm until the blade element lays fully against the windshield.
    Hope this helped.

    Take care and good luck

    Jan 09, 2011 | 2006 Pontiac G6

    1 Answer

    How do you replace the rear wiper on a 2009 Scion XD?


    You can make use of following procedure to replace rear wiper in ur scion xd.
    Pull the rear wiper arm away from the rear window in order to access the wiper blade.

  • Locate the hinge where the blade mechanism meets the wiper arm and squeeze the plastic tabs on the blade in order to release it from its locked position on the arm. In some cases, instead of tabs, there is a small button that must be pressed to release the wiper from the arm.
  • Detach the blade from the arm and slide the old blade out. Insert the new blade into the wiper arm and lock the blade in place.
  • Return the wiper arm to its set position. Before driving, wet the window and test the wiper to make sure it is operating properly.
  • Dec 14, 2010 | 2009 Scion xD

    1 Answer

    How do I replace wiper blades


    First, pull on the wiper arm until it raises and locks into the service position. The wiper arm will stand by itself once you raise it past a certain point.
    Then find the clip on the underside of the wiper arm (rotate the blade slightly to get to it.
    Press the clip in while simultaneously pulling the old wiper blade off the wiper arm. You can then discard the old blade.
    Align the new wiper blade with the wiper arm track. Slide it along the track until you hear it click.
    Repeat this process with the other wiper blade to complete the replacement of wiper blades on your Highlander.
    Return the wiper arms to their normal position against the windshield. Done!

    Dec 05, 2010 | 2005 Toyota Highlander

    1 Answer

    I need to adjust the wiper arm on a 1997 suburban, it hits the side of the window.


    Wiper Arm & Blade (Front) Removal & Installation Wiper Blade To Remove:
    1. Turn ignition switch to ACCY position.
    2. Turn wiper switch to PULSE position and turn ignition OFF when wipers are stopped in the innerwipe position.
    3. Push the wiper blade clip button IN and remove wiper blade from wiper arm.
    To Install:
    1. Insert wiper arm hook through opening in wiper blade.
    2. Place wiper blade pivot in the inside radius of wiper arm hook.
    3. Pull on wiper blade pivot into hook until it locks into place.
    4. Check wipers for proper operation.
    Wiper Arm To Remove:
    NOTE: Mark position of wiper blade on windshield to ensure proper position upon reassembly.
    1. Remove washer hose.
    2. Lift wiper arm from windshield and use a screwdriver to disengage retaining latch.
    3. Remove wiper arm from shaft.
    To Install:
    1. Place wiper arm on shaft so that wiper arm aligns with marks placed on windshield.
    2. Press arm assembly on shaft and push retaining latch IN.
    3. Connect washer hose.
    4. Remove windshield markings and check wipers for proper operation.
    prev.gif next.gif

    Oct 26, 2010 | Chevrolet Suburban 1500 Cars & Trucks

    1 Answer

    How do I change wiper blades on a Ford 500


    This is a fairly simple job.
    #1 Pull the wiper arm away from the vehicle.
    #2 Turn the blade 90 degrees so that the blade and the arm make a 'capital T' shape.
    #3 Pull the blade straight off of the arm.
    #4 Install the new wiper blade so that it forms a ' T ' with the arm.
    #5 Turn the blade back to the normal position in line with the arm.
    #6 Ease the wiper arm and blade back against the windshield.
    #7 You are done. Good luck

    Jan 03, 2010 | 2006 Ford Five Hundred

    1 Answer

    Removing wiper blades


    6eb8291.gif To Remove:
    1. Before servicing the vehicle refer to the precautions at the beginning of this section.
    2. Turn the ignition switch to the ACC.
    3. Set the wiper switch to the PULSE.
    4. Turn the ignition off when the wipers are in the innerwipe position.
    5. Depress the wiper blade clip button
    6. Remove or disconnect the following:
      • The wiper blade from the inside of the wiper arm
    gm_mv_ven_wiperbladel.gif
  • The wiper arm out through the opening in the wiper blade
  • To Install:
    1. Install or connect the following:
      • The hook of the wiper arm through the wiper blade opening
      • The wiper blade pivot into the inside radius of the wiper arm hook
      NOTE: Pull the wiper blade until the pivot locks into the hook.
    2. Check wipers for proper operation.

    Mar 30, 2009 | 2003 Pontiac Montana

    1 Answer

    Remove wiper blade


    Do you mean the wiper blade or the wiper arm?

    The wiper blade should have a small tab or lever on the underside of the hinge where it attaches to the arm. Use a small screwdriver or a pick (etc..) to gently pry the lever upwards to pull the locking tab out of its corresponding hole on the wiper arm. Once the tab is up, firmly grasp the wiper blade and pull towards the base of the wiper arm. Sometimes they stick a little, just be careful not to bend the wiper arm.
    If you are looking to remove the wiper arm, remove the plastic cap at the base of the wiper arm to gain access to the nut below. Using either a 13mm (1/2 inch) or 15mm socket (depending on the model) remove the nut by turning counter-clockwise. Once the nut is off, place your hand in the middle portion of the wiper arm and firmly push downward, being careful not to bend the arm. What you are trying to do is rock the arm off of the wiper motor stud. Be sure to mark where the wiper blade rests on the windshield before removing it, so you can reassemble it in the same spot when you put it back together. Use a grease pencil or something else that you can clean off later.
    Hope this helps!

    Mar 26, 2009 | 2006 GMC Yukon Denali

    Not finding what you are looking for?
    1996 Jeep Grand Cherokee Logo

    81 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Jeep Experts

    yadayada
    yadayada

    Level 3 Expert

    74896 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7689 Answers

    Are you a Jeep Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...