Question about Chrysler Town and Country

1 Answer

How do you replace drivers side mirror on 2003 Chrysler Town and Country? I can get the mirror off, but I need to know how to access the electrical connector for the power/heat feature. Do I have to lift the dashboard or another part? Thank You

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 22,156 Answers

No normaly the connection plug is down a bit and this requires the door panel to come off to get at the multiplug ,nothing simple why the multiplug cannot be behind the plastic trin on back of mirror ?'

Posted on Mar 18, 2011

  • sekoltcmi Jul 31, 2011

    This is a 2003 Chrysler Town and Country. The mirror isn't in the door like the older models. It is in front of the door and the wiring won't come out of the dashboard. It is apparently stuck and impossible to get to . I need the schematic to know which wire does what so I can connect the Taiwan Kool Vue mirror because it comes with different colored wires. Imagine that!

  • Colin Stickland
    Colin Stickland Jul 31, 2011

    honestly have no idea then if its not in the door ,i cannot say i have done one as YET ? as for the wiring then that cannot be difficult just use a multimeter to locate the feeds for up and down and left and right

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My wipers...lights..radio and horn went out but I can drive the car..what would cause this?


2008 Chrysler Town & Country Intermittent Electrical Failure ...

www.carcomplaints.com/Chrysler/Town_Country/.../intermittent_electric...
The 2008 Chrysler Town & Country has 25 complaints for intermittent ... The horn,lights, wind shield wipers front and back going crazy could not shut off. .... I was Driving down the road and my van went crazy possessed! ... Electrical checks reveal nothing wrong with the electrical system, and there is power to the radio.

2003 Dodge Caravan ES Electrical Problem - Discussion on Topix

www.topix.com > Dodge Grand Caravan
Aug 7, 2011 - my van was running fine, shut it off, went in for half an hour then it would not ... or the electric doors. windows do and brake lights. heater stays on hot and i can only ... My horn wipers,power windows, radio,blower front and back, headlights, do not work. ... Chrysler Readies Next-Generation Town & Country.Missing: 2004

Thread: I lost almost all of my dash lights, instruments, and ...

forum.chryslerminivan.net/.../7261-I-lost-almost-all-of-my-dash-lights-i...

Jan 17, 2008 - 10 posts - ‎6 authors
I have a 2003 Town and Country mini-van and I lost power to all my ... In addition to this my wipers, headlight controls, blinker controls, power door locks, and A/C/heat controls are out as well. The odd thing is that the power windows work, the power sideview mirrors work, the radio and ceiling lights also work.

Dec 16, 2015 | 2004 Chrysler Town and Country

1 Answer

How do you replace passenger side mirror on 2003 Chrysler Town and Country?


If you open the door you will see two screws behind the plastic base remove them and mirror will come off then remove the connector,

Sep 15, 2010 | Chrysler Town and Country Cars & Trucks

2 Answers

2003 Town & Country Van- trying to replace the drivers side mirror but can't find the plug inside ... please help.


you will need to remove the door panel the connection goes down about 10 inches from mirror,

Aug 07, 2010 | 2002 Chrysler Town & Country

1 Answer

How do you change drivers side rear view mirror on 01 T&C Limited


  • remove the door trim at the mirror
  • remove the three bolts holding the mirror assembly
  • disconnect the electrical connector (assuming its powered mirror)
  • remove the mirror and replace

Jun 03, 2010 | 2001 Chrysler Town & Country

1 Answer

Looking to replace passenger side mirror on a 2006 Town and Country. Anyone have Instructions available?


    Remove Old Mirror
  1. 1 Open the side door to the Chrysler Town & Country, and find thescrew that holds the side mirror molding in place.

  2. Take the screw out and remove the molding panel that attached around the outside of the power mirror.

  3. Remove the bolts connecting the mirror to the door assembly. If equipped, unplug the power side view mirror wiring harness connector.

  4. Unplug the electric connectors, and pull the mirror out of the molding.

Jun 01, 2010 | 2006 Chrysler Town & Country

1 Answer

Describe your 1997 Chrysler Town &


You need to replace the whole assembly. It comes as a motor/regulator.

Jul 28, 2009 | 1997 Chrysler Town & Country

1 Answer

Removing and replacing passenger side mirror 2002 town and country van


there should be a triangle shaped plastic section on the interior of the door behind the mirror, check it for a little plastic screw cover to remove it or you may just have to lever it gently to remove it.
once it is off it exposes the mirror retaining bolts which you undo to remove the mirror, I presume it has electric mirrors and if that is the case you will have to find the electrical wire plug for the mirror and pull it apart, replace mirror in reverse order of removing

May 12, 2009 | 2002 Chrysler Town & Country

1 Answer

Left low beam headlight on Chrysler 2003 T&C wont work while engine is on


Ill guarantee you have an electrical short on the left side of the headlight switch,circuit.From here its immpossible for me to go any further.Good Luck.,Get A Wiring diagram.

Apr 18, 2009 | 2003 Chrysler Town & Country

1 Answer

How do I remove a drivers side mirror from a 2001 Chrysler Town & Country?


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Mar 19, 2009 | 2001 Chrysler Town & Country

1 Answer

Need to replace the driver side headlight


there is 3 10mm. bolts that hold the whole lens in they are on top ,take these out and then pull out whole assembly this will make it easy to replace sorry it took long to get back to you!

Mar 18, 2009 | 2003 Chrysler Town & Country

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...