Question about 1999 Ford Expedition

1 Answer

Changing spark plugs on 1999 ford expidition - 1999 Ford Expedition

Posted by on

  • yadayada
    yadayada Mar 18, 2011

    Which engine?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 161 Answers

One at a time dont rush thats how mix ups happen..be sur to check gap on plugs even preset plugs get banged an shuffled an not always correct in the box.replace wire then on to next be sure to keep track of the ones that rrrrr dun,

Posted on Mar 18, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why won't my 1997 ford expidition Start it's turning over but won't start my fuze is blown on the interior fuze box it's the last row over to the right and the 9th one down


CAN YOU REPLACE THE FUSE? AND START AGAIN. IF NOT TAKE OUT ONE SPARK-PLUG LAY ON THE ENGINE BLLOCK STILL CONNECT TO ITS WIRE; ACTIVATE THE STARTER WHILE CHECKING FOR SPARKS ON THE PLUG. nO SPARK, NO POWER.

Jun 19, 2015 | 1997 Ford Expedition

1 Answer

Ford 2006 expidition xlt cranking but wont start


Remove a spark plug and see if its wet with gasoline....it could be flooded.

Feb 01, 2013 | 2006 Ford Expedition

1 Answer

Why is my 2000 expidition sputtering at idle


check the spark plugs may be time for a tune up. it may have coil packs instead of spark plug wires which commonly go bad and cause a misfire at idle as well

Aug 05, 2012 | 1998 Ford Expedition

1 Answer

My 1999 ford expidition want start


Could be many things. First i would listen for the fuel pump to kick on whenever you turn the key on(without starting). Then if you don't hear it kicking on, check all your fuses. Especially the fuel pump fuse. If none of your fuses are bad, then your fuel pump is shot and you need to replace it. After that, if it still wont start, Check to see if your getting spark to your spark plugs. You can do this by taking the sprk plug out, and keeping it hooked to the wire and have someone try to crank the motor. As they are turning the motor over, see if you see the spark plug sparking. If not, then its your coil packs, or your vehicle is off time. ALSO, try changing the crank sensor. That could be why its not starting as well. Hope this helps, James Booth. Please rate this. :) And good luck with your experiance in trying to crank your vehicle. Have a good day.

May 18, 2011 | 1999 Ford Expedition

1 Answer

Where are the spark plugs in Ford KA 1999 and how do i change them


IF YOU HAVE THE EI IGNITION SYSTEM.YOUR SPARK PLUGS IS UNDER EACH INDIVIDUAL COIL.DISCONNECT COIL ELECTRICAL CONNECTOR.THEN REMOVE COIL RETAINING BOLT.THEN REMOVE OFF SPARK PLUG.THEN REPLACE SPARK PLUG.YOU HAVE 8 COILS TO REMOVE BEFORE REPLACING SPARK PLUGS.

Feb 16, 2011 | 1999 Ford Explorer

1 Answer

Where are the spark plugs 1996 ford expidition v/8


on the top of the intake the are eight coil packs with 7mm. bolts holding them down spark plugs are right under them

Mar 24, 2010 | 1997 Ford Expedition

1 Answer

I would like to know how to change the spark


FIRST OF ALL YOU HAVE CHANGE SPARK PLUGS WHEN ENGINE IS COOL.IF YOU CHANGE THEM WHILE ENGINE IS HOT YOU COULD DAMAGE THE ALUMINUM HEADS OR CAUSE DISTORTION.TO CHANGE SPARK PLUGS YOU NEED A SPARK PLUG SOCKET.A TORQUE WRENCH.ITS NOT MANDATORY.BUT IT WILL KEEP YOU FROM OVER TIGHTEN SPARK PLUGS.YOU NEED A 3/8 RATCHET AND EXTENSION.YOU ALSO NEED A SPARK PLUG GAP GAUGE.AND SPARK PLUG BOOT PULLER.YOU ALSO NEED SOME ANTI SEIZE COMPOUND.TO PREVENT DAMAGE THREADS WHEN INSTALLING THE SPARK PLUGS.

Oct 13, 2009 | 1999 Ford Expedition

1 Answer

1998 loose power after 35 mph


it sounds like the computer is the issue and thats why the code reader can't communicate with your expiditions computer

Mar 19, 2009 | 1998 Ford Expedition

Not finding what you are looking for?
1999 Ford Expedition Logo

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5471 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...