Question about 2000 Acura TL

Open Question

Oil leak on acura tl 2000 can not find it - 2000 Acura TL

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 4 Answers

SOURCE: trying to replace a front headlight bulb on 2001 acura 3.2 TL

Look for the end of the wire retainer clip. Unhook it and lift it up. Remember not to touch the bulb. But if you do, just clean it with a bit of alcohol.

btw - Here's a bit of info from a previous post of mine...
The low beams consist of three parts. The bulb, inverter/ballast and the ignitor. The bulbs usually start to loose their color long before they burn out. The inverters/ballasts either go out after a while or take a while to start up.

Before you spend money on a new bulb, try swapping it with the one on the other side. You'll need a security torx screwdriver to get the covers off of the back of the lights. Don't touch the glass bulbs. If you do, just clean them with a bit of alcohol.

If the problem stays on that side, try swapping the ignitors. They're mounted inside the black covers.

If the problem is still on that side you've got a bad inverter. They're mounted on the bottom of the headlight assembly. You'll need to remove the front bumper and remove the headlight assembly to get to it. (I recommend you take pictures as you remove things so can put them back together correctly.)

Posted on Jan 05, 2009

masterraphie
  • 41 Answers

SOURCE: starter replacement on acura 2000 TL 3.2

This starter can be changed without disassembling the top of the engine on the 2.5 with automatic transmission. You will need a 10mm, 14 mm, 17mm, and a 9mm wrench. First with any electrical repair disconnect the battery at the negative terminal. The starter is on the driver's side close to the firewall below the intake manifold. Remove the transmission dip stick so you don't ruin it, then look and study the starter itself. You will notice the starter drive housing with a top and bottom bolt. The top bolt is a 14mm and the bottom a 17mm, loosen both a half turn. Remove the top 14mm bolt first, then the bottom 17mm, this will allow you to pull the starter out of the bell housing. With some angling and no brackets holding the back of the starter you should be able to pull it out enough to disconnect the positive wire and 9mm nut from the soleniod. Disconnect the starter ignition small wire by pulling it off it's connector. Now just pull it out of the engine and fender void and you've got it, saving about a hundred and fifty dollars of labor. Take it to the parts house and match it up with a well made remanufactured or new starter. Reverse the proceedure, hook up the battery.

Posted on Mar 19, 2009

  • 701 Answers

SOURCE: firing order

Hello bailsdenied: THe fireing order for a Acura NSX 3.2L DOHC (vtec) engine is 1-4-2-5-3-6. If this is the correct model of car then it is right. If this is not the right car then ask and I will send the correct one. Please rate the answer you recieve as this lets us nkow you were provided the correct answer to your question. Thank you for using FixYa. Roger55224f4.jpg

Posted on Apr 25, 2009

  • 7353 Answers

SOURCE: 2000 acura TL horn blows when replacing the battery

dont you have the alarm key fob? if so that will reset it. just press unlock. If you dont an dits not a OEM Acura alarm you will need to find who makes it and get a new key fob, or have a shop that does alarms to disconnect it.

Posted on Oct 06, 2009

Testimonial: "thank you so much. Like most solutions, it was simple and obvious once you pointed it out. I really do appreciate the help!"

  • 417 Answers

SOURCE: ACURA TL SERVICE DUE SOON B1

It's a service interval reminder light that you should take your car to acura and have them perform the "b1" service. I would ask for an estimate first, and ask what that service includes. You may be surprised to find necessary and unecessary services. Some people view the b1 light as a way for Acura to get you car in there, quite possibly be charged for things you could probably do yourself.

Posted on Apr 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What causing multiple random misfires on 2000 acura 3.2 tl?


poor compression, fuel pressure/volume, vacuum leak, dirty injectors, carbon build up on back of intake valves, ignition circuit problems either coils, plug boots, wiring, poor connections, even a damaged camshaft or bad cam/crank sensor.

Feb 08, 2015 | 2000 Acura TL

1 Answer

1999 acura tl is leaking oil, but the dip stick reads normal


ck all fluids , top off and note if any low. make sure whate kind of fluid it is. How much are u leaking a day ?

Mar 17, 2013 | 1999 Acura TL

1 Answer

2000 acura TL my air conditioner or heater doesn't blow at all and its not a fuse


built into the motor is a resistor pack and this i suspect is your problem

Oct 19, 2012 | 2000 Acura TL

2 Answers

ACURA tL 2000


Did you check trans fluid level??

Mar 16, 2010 | 2000 Acura TL

1 Answer

Started up my acura tl 2000 and started to hear knocking and shut off


Check oil level and oil pump. Oil pump light should turn off after a few seconds after start up. If light stays on for more then 3 second shut off and do not drive or run motor.

Jan 12, 2010 | 2000 Acura TL

1 Answer

ACURA TL 2007 HEAVY NOISE IN THE ENGINE FOR 4 5


There are two mechanical noises you will hear from an engine, lifter noise, wrist pin slap, and rod bearing noise. The only one that will go away, if at all, with engine warm-up, is lifter noise. All assuming of course, the noise is coming from the engine, and not any of the externally mounted accessories.
Have the oil changed, and continue to change every 2000-3000 miles with a good quality oil, maybe the lifter will clear itself. If it does, maintain the oil changes for the next few changes to assure it is cleaning out.
You might also try adding 1-2 pints Berrymen's Chemtool to the oil 200-300 miles before you plan to change the oil.

Dec 13, 2009 | 2007 Acura TL Sedan New Cars

1 Answer

Whar weight oil should a 96 accura 3.2 tl use?


use a good 5w-30 oil, and replace the filter

Nov 26, 2009 | 1996 Acura TL Series

1 Answer

How do I clean out the transmission without taking transmission out on a 2000 acura tl--no outside filter


there is a t tech fluid change machine available at oil change places, does a really good job....They will know if the filter requires changing on your model...

Sep 18, 2009 | 2000 Acura TL

1 Answer

1999 Acura TL at idle it varies from 2000 rpm to 3000 rpm


Throttle position sensor or a vacume leak.

Feb 09, 2009 | 1999 Acura TL

Not finding what you are looking for?
2000 Acura TL Logo

Related Topics:

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...