Question about 1999 BMW 318 ti

1 Answer

320CI traction control off all the time

I have fault code 24095 to you know what it means?

Posted by on

1 Answer

Here you can find OBD2 error codes, if jou find it useful:
codes

Posted on Aug 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

What does it mean when dash light comes on showing a car sliding


that symbol is usually related to the vehicles stability control or traction control the fact that its displayed possibly means its been deactivated

Feb 21, 2016 | 2010 Ford Edge

1 Answer

What does error codes 40 and 41 mean on my 1999 mitsubishi eclispe mean


11 Oxygen sensor fault.
12 Airflow sensor fault.
13 Intake air temp sensor fault.
14 Throttle position sensor (TPS) fault.
15 Idle speed control (ISC) motor position sensor fault.
21 Coolant temp sensor fault.
22 Crankshaft position (CKP) sesnor fault.
23 Camshaft position (CMP) sensor fault.
24 Vehicle speed sensor (VSS) fault.
25 Barometric (BARO) pressure sensor fault.
31 Knock sensor fault.
32 MAP sensor faulty.
36 Ignition timing adjustment signal fault.
39 Oxygen (O2) sensor fault.
41 Injector(s) fault
42 Fuel pump fault.
43 EGR fault.
44 Ignition coil (cylinders #1 & #4) fault.
52 Ignition coil (cylinders #2 & #5) fault.
53 Ignition coil (cylinders #3 & #6) fault.
55 Idle air control (IAC) valve position sensor fault.
59 Rear Oxygen (O2) sesnor fault.
61 Transaxle control module torque reduction signal fault.
62 Variable Induction control (VIC) valve position sensor fault.
71 Traction control (TC) vacuum valve solenoid fault.
72 Traction Control (TC) vent valve solenoid fault.

Sep 26, 2014 | 1999 Mitsubishi Eclipse

2 Answers

Chevy 2006 hhr light says t/c what does this mean?


Could be for the traction control.
You would need to have the body computer scanned for trouble codes to proceed.

Jul 11, 2012 | 2006 Chevrolet HHR

1 Answer

Light comes on "Traction Active" and wheels lock down.


When the Engine Control Module encounters problems, it will also disable the traction control system. Scanned the ECM to know fault codes stored there, repairing this codes and clearing the codes will turn off the Traction indicator and allows the traction control to work once again.

If the Traction Control light is coming on, the traction control is activating and can cause a jerking problem. Nothing last the life of the vehicle, however the timing chain should not need to be changed at 49,000 miles. If it does, I would have them do it under warranty. See if you can get the codes and send them to me. That way we can get a better ideal of what is going on. Could you please tell me what these codes stand for?

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day

Feb 17, 2012 | 2002 Pontiac Montana

1 Answer

Light comes on "Traction Active" and wheels lock down.


Hi David:
When the Engine Control Module encounters problems, it will also disable the traction control system. Scanned the ECM to know fault codes stored there, repairing this codes and clearing the codes will turn off the Traction indicator and allows the traction control to work once again.

If the Traction Control light is coming on, the traction control is activating and can cause a jerking problem. Nothing last the life of the vehicle, however the timing chain should not need to be changed at 49,000 miles. If it does, I would have them do it under warranty. See if you can get the codes and send them to me. That way we can get a better ideal of what is going on. Could you please tell me what these codes stand for?

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day

Feb 17, 2012 | 2002 Pontiac Montana

1 Answer

Light comes on "Traction Active" and wheels lock down.


Hi:
When the Engine Control Module encounters problems, it will also disable the traction control system. Scanned the ECM to know fault codes stored there, repairing this codes and clearing the codes will turn off the Traction indicator and allows the traction control to work once again.

If the Traction Control light is coming on, the traction control is activating and can cause a jerking problem. Nothing last the life of the vehicle, however the timing chain should not need to be changed at 49,000 miles. If it does, I would have them do it under warranty. See if you can get the codes and send them to me. That way we can get a better ideal of what is going on. Could you please tell me what these codes stand for?

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Feb 17, 2012 | 2002 Pontiac Montana

2 Answers

Traction light stays on with engine light on 06 Impala. Can there b something wrong with engine before warranty runs out


When these light come on it means that the modules that control them have detected a fault of some kind, you must have the systems module scanned with a special tool to see what codes are stored before deciding what the cause is, it can be any of about 100 things.

Feb 16, 2012 | 1998 Dodge Dodge Grand Caravan

1 Answer

Track control pop on what do that mean and can I trim it off


Your traction control switch may be located on center IP fascia. below the front a/c control switch. Pls check your manual. You can turn it on or off and it will indicate visually on the insrument panel cluster. Normally the default mode is off,(traction light off) meaning the traction system is enabled and operational. If the light comes on while the engine is running and even without touching the switch, it only means that your traction control system have been disabled because the system has detected a fault; you can still run and proceed carefully in good brakes without the traction control system..However' you still need to have your vehicle scanned for codes to know the specific cause.

Feb 18, 2011 | 2007 Chevrolet Tahoe

1 Answer

2001 3 Series: automatic warning lamp came on on my 320ci...


Which warning light? Check engine? Traction? Transmission? Can you give me a more detailed description? With a check engine light Autozone will check it for free and give you the code that caused the light to come on. With the code you can troubleshoot and repair.

May 17, 2010 | 2001 BMW 3 Series

Not finding what you are looking for?
1999 BMW 318 ti Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Fred Sops

Level 2 Expert

271 Answers

Al Clark

Level 2 Expert

290 Answers

Doberman

Level 2 Expert

246 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...