Question about Dodge 600

1 Answer

My 1986 dodge 600 won't start..the engine is cranking and gas is getting in to it but I can't get a spark..I also have changed the coil n still not gettin a spark..

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 4,977 Answers

I assume you have checked to make sure that the distributor is turn while cranking.if not then you have a broken timing belt,if it is turning then you probably have a bad pickup coil in the distributor.the wires that come out of the distributor that plug into a harness is part of the pickup coil.if you follow the wires into the distributor it will take you to the pickup coil itself this is the part that needs to be replaced.i trust that you checked to for battery voltage to the coil.

Posted on Mar 18, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

86 dodge 600(2.2 non turbo) new( reman) ECU new coil car looses spark after fan runs 3rd time no engine codes idling or driving it does get hot not sure of actual temp STUMPED


Visit the on-line store, know as reliable-store, they have the repair manuals. I'm sure you will get the solution of your problem.
Best Manuals

Sep 25, 2016 | 1986 Dodge 600

1 Answer

1986 dodge with a 2001 360 dodge magnum motor 600cfm edelbrock carb, air gap edelbrock intake. new plugs (e3s) new wires new coil new ballast.. is all in time.. wont start help


Are you getting spark? You've put a 2001 engine into a 1986 body. The 2001 engine ran with an engine control module (ECM), the 1986 doesn't have that. The 1986 probably has an electronic ignition module that works with the 1986 coil and 1986 reluctor/distributor. You may want to compare the two distributors and the two coils.

Sep 12, 2016 | 1986 Dodge D150

1 Answer

It mayI have no fire going to the coil or from the coil to the plugs


Have you checked the wiring, the spark @ plug, Power to the coil???

Engine Won't Start No Spark - Auto Diagnosis Repair Help

aa1car.com/library/no_spark.htm
If your engine cranks normally but will not start because it has no spark, or it ... If an engine has a coil-on-plug ignition system with no plug wires, remove one of ...

No-start, No-Spark diagnosing simulated - YouTube

? 5:13
https://www.youtube.com/watch?v=XSWN1M8Hoqo
May 19, 2010 - Uploaded by FrankHurtAuto
Simulation of no start with no spark diagnosing, ... Ignition coiland module test with test light (ScannerDanner Premium lecture) - Duration: ...

getting fire from coil but not to plugs - CarGurus

www.cargurus.com > Questions > Dodge > Ram 1500

CarGurusJun 12, 2013 - 2000 dodge ram 1500 4x4 not getting fire changed distributor cap, coil, pickup ignition, rotor, plugs, plug wires 2 answers. ... 1994 dodge 5.9 just shut off and wont start back up there is no spark or fire from coil or plugs. ... 94 dodge van 318 eng will not start new plugs new crank ...

Ignition Coil Troubleshooting: (No) Fire in the Hole

www.secondchancegarage.com/public/coil-troubleshooting.cfm

Jan 27, 2016 | Cars & Trucks

1 Answer

4x4 v8 1998 dodge truck won't start


well if ur not getting spark and u changed all of the ignition components lets think about the computer in order for the ignition to work you have crankshaft position sensor that fires the fuel injectors and the spark change that and if still nothing then change the camshaft postion sensor that sensor tells the computer that the 1 piston has came all the way up and it tells the crankshaft sensor to do its thing

Feb 21, 2013 | 1998 Dodge Ram 1500 4WD

1 Answer

1990 Dodge Ramcharger won't start. Battery output 12v, voltage across coil terminals 6v, voltage output at coil port to coil wire 6v, voltage of coil wire output to distributor 6v. Engine will c


There should be a small white ceramic block on the firewall - this component cuts the battery voltage from 12 to 9 volts for the coil and ignition system. It has 4 wires and is called a ballast resistor.
You may need a book with the wiring diagram to be able to test it. You should have battery voltage going in and something like 9 volts coming out.
You can also run a wire with a fuse from the battery to the positive side of the coil to check the system. Disconnect the factory wire from the coil first.

Jan 27, 2013 | Cars & Trucks

1 Answer

Engine won't start


If you have spark at the right time, compression, and fuel, you should have combustion.
Was it running before you had the work done ?
Is it possible the distributor timing is off ?
You know for sure the plugs are firing, not just the coil ? And the accel pump in the carb is spraying gas ? And the choke is closed ?
A major vac leak like the PCV valve hose or intake gasket could keep it from starting.

Jul 06, 2012 | Dodge Cars & Trucks

1 Answer

My 1998 Dodge Durango won't start. No spark


check for power at the coil. There should be power anytime the engine is cranking. If there is no power let me know and i'll get you some more info.

If there is power check for pulse on the other wire. If there is pulse than replace the coil.

if there is no pulse I can get you more info on that as well.

Feb 08, 2012 | 1998 Dodge Durango

2 Answers

Gas not getting to the carburator. Starter turns


Check all of the fuel lines very carefully for breaks or cracks in the fuel lines, especially between the fuel tank and the fuel pump.

If the fuel lines are all in good condition then you can safely assume that the problem is in the fuel pump and you will need to replace it. (If the fuel pump is in really bad shape the engine oil on the end of the engine oil dip-stick will smell like fuel)

May 13, 2010 | 1986 Dodge D150

1 Answer

1996 Dodge Caravan starting problem.


p0352 is ignition coil #2 primary circuit..the engine controller had these circuit problems in this model year..also have seen a crank sensor cause this fault also..if it's not the crank sensor,most likely engine controller

Jun 02, 2009 | 1997 Dodge Dakota

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

245 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...