Question about 2008 Mercury Milan

Open Question

How to change the rear brakes on 2008 mercury milan

Posted by on

6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

SOURCE: is ir normal to replace

The rear brakes should last 70,000 miles, if
you disassemble,clean & lube once a year,
on the rear of most all cars

My question is --- have you not had years or decades
of experience with other vehicles?
If so, why would you ask that question?

Posted on Aug 26, 2011

  • 3600 Answers

SOURCE: How do I change brake light bulb of Nissan Sentra 2008

the llight assembly has to be removed there are 4 screws to get it out with, however some just unscrew counter clockwise to get the bulb out.

Posted on Jun 21, 2009

  • 869 Answers

SOURCE: My airbag indicator light stays

check with the wiring of the light indicator ..there will be some lose connection...

Posted on Dec 28, 2010

  • 356 Answers

SOURCE: Just bought a 2008 Mercury

The owner's manual has some information on this regarding
key programing and such. Did you buy a new key bob? Call
your dealer's service dept. some will tell you how or do it for
free especially if you buy the key bob from them.

Posted on Feb 12, 2011

  • 257 Answers

SOURCE: just bought a 2008 Mercury

Hold the sync button on the garage door opener located on the roof on the garage. Hold it until the light bulb on the garage dor opener blinks. Hold the remote until the garage door opens or closes. Here is a link to help you out. hope this helps! Please give me 4 thumbs up!

Posted on Apr 19, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a mercury 2008 milan and my rear passenger brake just locked up, what can i do to fix problem

Pull the wheel off and inspect the brake, it could have a defective caliper piston, the other issue can be a defective Antilock brake system hydraulic control valve.

Sep 19, 2016 | 2008 Mercury Milan

1 Answer

How to bleed the brakes on a 2008 mercury milan with ABS

Two people start at the front brakes and finish on the rear,pump the pedal up then open the bleeder ,hold pedal down while locking off the bleeder ,do the same on all brakes,check the ABS unit it could have bleeder valve ,s on it as well,keep the master cyl .full while bleeding to stop air entering .

Apr 15, 2016 | 2008 Mercury Milan

1 Answer

2008 mercury milan won't shift into gear is this due to the sensor on the brake pedal arm

what sensor??did you do something and now it wont shift??there is an interlock on the shifter that goes bad

Jun 20, 2015 | 2008 Mercury Milan

1 Answer

Mercury milan problems

Possible Bad fuel pump taking out relay

Jul 27, 2014 | 2008 Mercury Milan

1 Answer

Changed battery in 2088 mercury milan and engine light came on

you should have it hooked up to a computer. whatever the problem is, it may not have anything to do with the fact that you chaged the battery but could just be that a new code has popped up and something needs to be repaired

Jan 26, 2013 | 2008 Mercury Milan

1 Answer

2011 Mercury Milan LED tail light out

Yes, I have a 2011 Milan as well and both sides of mine went out. One last year (2013) and the other side recently. My car is no longer under warranty and the dealer said they it would be $417 to repair. Ford needs to fix this issue because from what I have been reading it is a common problem and it is a safety issue!

Nov 05, 2012 | 2010 Mercury Milan

1 Answer

08 mercury milan stuck in park

Check and see if your brake lights are coming on.
There is a brake interlock and if the brake pedal switch is loose and doesn't turn on the brake lights, it will not let you shift out of gear.

Its to keep you from rolling in to something by accidently putting it in gear. It also keeps you from driving with no brake lights, which will tend to get you rear ended.

The switch is usually physically attached to the brake pedal bar under in the drivers footwell.

Oct 05, 2012 | 2008 Mercury Milan Premier

1 Answer

Is ir normal to replace rear brakes on a 2010 mercury milan with only 22,300 miles? 15-16,000 of the miles are highway miles

The rear brakes should last 70,000 miles, if
you disassemble,clean & lube once a year,
on the rear of most all cars

My question is --- have you not had years or decades
of experience with other vehicles?
If so, why would you ask that question?

Aug 25, 2011 | 2010 Mercury Milan

1 Answer

Rear caliper sticking ? after new pads installed

Did you drain excess fluid out of the reservoir?

Apr 30, 2009 | 2008 Mercury Milan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

703 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts


Level 3 Expert

75822 Answers


Level 3 Expert

5501 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides