Question about Dodge Spirit

1 Answer

I HAVE A 1993 DODGE SPIRIT THAT THE ROCKER ARM HAS COME OFF ONE OF THE VALVES

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,911 Answers

That certainly is an odd problem. Either the nut backed off or the stud broke. As you have the valve cover off anyway have someone who knows what they are doing put in a new stud and rocker, check the push rod for bending, if so equipped, and adjust all valves on both sides. Replace the valve cover gaskets, should be OK as the rocker arm missing just means the spring held the valve shut.

Posted on Mar 18, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the clearance between the rocker arm and the valve spring in a GM 2.2L motor


there is no specification for what you want
the valve clearance is between the end of the rocker arm and the end if the valve stem
the stem end is proud of the spring retainer so if your rocker arm is touching the spring retainer , you have a big problem as for the procedure it is set out in the workshop manual but if you don't have a manual it can be done like this
you will need the firing order of the engine first
now adjust no 1 piston valves when the next piston to fire has the valves in the rock position
that is the exhaust valve just closing as the inlet is just opening a bit of movement of the crank makes either valve move up or down
adjust no 1 piston valves
now move on to the next piston to fire and adjust the valves that were rocking
follow that procedure until all the valves are adjusted
for example
on a 4 cylinder engine with a firing order of 1--3--4--2
bring up no 1 piston and adjust the valves when the valves on no 3 piston are rocking
next piston to fire is no 4 so adjust no 2 piston valves
next piston to fire is no 2 so adjust the valves when no 1 valves are rocking
the procedure is the same for engines with any number of cylinders

Oct 19, 2016 | Cars & Trucks

1 Answer

I removed rocker arm assembly and did not line up timing marks did i waste the car 2005 dodge neon sxt


If you removed the rocker arms then the exhaust valves will all be closed and so will miss the pistons. How ever if the inlet valves were not working and the rocker arms were still in place then there may be damage to inlet valves.

Jan 25, 2015 | Dodge Cars & Trucks

2 Answers

I pulled my valve covers on my 04 jeep liberty 3.7 and both sides have a rocker arm that has slipped off. there doesn't seem to be any damage done, but i have yet to pull the heads off. what should i look...


Hi, without a rocker arm, the valve would stay closed. As the lash adjusters may have been loose for a while, check the camshaft lobes for wear as well as the rockers themselves. Look around for other stuff the rocker may have damaged while bouncing around in the valve cover. Replace all of the lash adjusters, making sure to put the rockers back on their original valves. Not sure you need to pull the heads. Why don't you put it back together and run a compression test. If compression is good, valves are probably fine. Let me know if you have more questions, and thanks for using FixYa.

Dec 31, 2010 | Jeep Liberty Cars & Trucks

2 Answers

Rocker arm come out on jeep chrysler 3.7 eng


A rocker arm is the arm that sits on top of the valve stem and connects to the push rods 'the push rods sit on the cam so when engine is running, the push rods go up and down in a timed sequence and with the rocker arms, open and close the inlet and exhaust valves. the rocker arm is located inside the valve(rocker)cover .If the rocker arm gets loose or comes out.
Check the nuts on the shaft which holds the rocker arms.either the shaft or nuts are got loose.They need to be tightened.Don't make it too tight or too loose.  Too tight,and they don't flutter right. Too loose,and they allow the rocker arms to wiggle out of whack. Other possibility can be  something is broken, bent, collapsed, or out of adjustment. 
Thanks. you can rate this solution and show your appreciation.



May 20, 2010 | 2002 Jeep Liberty

1 Answer

Valves clicking with no lack of oil


The noise you are hearing is the ( hydraulic lash adjusters). They are located under the rocker arm assembly. To get to the assembly you will have to remove the rocker arm covers and remove the complete rocker assembly and springs. you will need to remove complete assembly from engine and put on a clean table to remove worn out hydrolic lash adjusters. If you attempt to do this yourself, remove the negative battery cable from battery before you start. If you have no experience on working on engines then take it to a mechanic to do the work. hope this will help you.

May 12, 2010 | 1998 Dodge Grand Caravan

1 Answer

I need torque specs on 93 dodge 360 ..heads, rocker assembly and torque sequence


Cylinder Head Bolt 5.9L

Step 1 - 50 ftlb
Step 2 - 105 ftlb
Step 3 - Recheck At 105 ftlb

Tightening sequence

Rocker Arm Bolt

5.9L - 17 ftlb

Jan 23, 2010 | 1993 Dodge Ramcharger

1 Answer

Engine has no compression


when the timing belt broke it also bent the valves,hence the broken rocker arm. pull the head and see the valves are bent

Apr 09, 2009 | 2002 Mitsubishi Lancer

2 Answers

1993 TOYOTA TERCEL 1500cc Valve Seals Replaced now smokes much worse


You either have had the wrong valve seals installed, they are physically missing, or the valves are incorrect (too loose in the guides/stem too thin). The rocker arm seals will not contribute to your issue. If it did not have the oil smoke before you took the head off, the issue is with whatever the machine shop did. Valve seals have to fit TIGHT, or oil will go down the valve stem into the intake.
Take the head back to the machine shop & tell them to fix it. For free.

Aug 23, 2008 | 1993 Toyota Tercel

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...