Question about 2004 Chrysler Sebring

1 Answer

2004 Sebring sedan. drivers side rear window is stuck down. Trying to remove door panel now. What should I look for to troubleshoot this? Thanks

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Expert
  • 1,114 Answers

Most of the time when an issue such as this occurs, the electric motor that operates the window is just stuck, and will need to be gently tapped with a screwdriver, or the wooden end of a hammer. The first thing to do, would be to unplug the switch, and replug it, sometimes it can simply be a bad connection. Try this with the door switch and the electric motor. If that does not work, then try tapping the motor while you, or someone else is operating the switch that will raise the window.

Posted on Mar 18, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Windshield wipers stop working when the defroster is on


The only thing they have in common is the ignition switch.

Dec 18, 2015 | 2007 Chrysler Sebring Sedan

3 Answers

My drivers side window will not go up or down. Also, the door lock/unlock on the same side doesn't work either


Sounds like a connector is disconnected inside the driver side door. The connector is usually located near the front of the door. Removing the door panel could be a job you do not want to attempt, but the car being a 2004 you may want to try. The wiring for the door windows and locks goes through this door.

Mar 11, 2015 | 2004 Chrysler Sebring

2 Answers

Where is the power window down relay located on a 2003 Chrysler sebring LXi 4 dr sedan


There is no seperate relay for up and down. It is the same one. What problem are you having?

Jan 06, 2015 | 2003 Chrysler Sebring

1 Answer

2004 Chrysler Sebring Drivers Side Window goes up off center and back window doesn't go up at all. I can pull up the back window but it just fallsback down as if it is no longer attached to anything.


No good news here
You know the issues and the routine
Remove the door panels and side interior panel and replace the worn out window regulators on both.

Oct 01, 2010 | 2004 Chrysler Sebring

1 Answer

The inside door handle/ lever on the driver side of my 2004 Sebring will not release the door. The outside door lever works fine. 1) How do I remove the inside door panel? Thanks, Larry


See this link on the same site: http://www.fixya.com/cars/t5231823-remove_drivers_inside_panel_door
The answer isn't for door locks but the procedure for removal of the panel is the same. I just removed the panel on my 2004 convertible this afternoon and followed similar instructions.
DT

Aug 23, 2010 | 2004 Chrysler Sebring

1 Answer

How to replace driver side mirror on a 2007 chrysler sebring ltd


Once you take of the door panel, you should have two or three nuts behind the black triangler shape cover..Once you take them off, you just reverse the procedure...To take the door panel off, you may need a flat head screwdriver, and a phillip screwdriver..You may have two or three screws to take off..One is by the door handle..One may be under the window switch..which you can pop that off with the flat head screwdriver...Then just pop the panel off, and disconnect all the connections..Should be no more than 3....Goodluck..

Dec 07, 2009 | 2007 Chrysler Sebring Sedan

1 Answer

REAR DRIVER'S SIDE DOOR PANEL


plastic clip on back of handel , hard to remove without right tool , but can be done

Jun 01, 2009 | 2004 Pontiac Grand Prix

1 Answer

Window off track driver side 1997 sebring


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Mar 23, 2009 | 1997 Chrysler Sebring

2 Answers

Driver side power window stopped working


The door panel is held on by plastic clips and 5 screws. 3 screws are on the bottom and 1 in the pull cup and 1 in the inner door handle.Then grab one of the corners and give a small tug, when you get some of the clips to pop out then proceed around the whole panel. To replace the panel take the clips out of the door with a fork and slide them back into the panel and then line it up on the door and use your hand like a hammer and bang the panel back on. Hope this helps

Jan 12, 2009 | 2004 Chrysler Sebring

Not finding what you are looking for?
2004 Chrysler Sebring Logo

561 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...