Question about Dodge Dakota

1 Answer

Fixing steering rack bushing - Dakota Dodge Cars & Trucks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 98 Answers

The steering rack bushings are available
@Thepartsbin.com for 23.95

Posted on Apr 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of the steering rack bushings on a 2001 grand am se


Steering rack and pinion is under the car, on the back side of the engine frame. There is only one bushing. On the passenger side. The drivers side is solid. No bushing. If it is sloppy. Frames break.

Oct 16, 2016 | 2001 Pontiac Grand Am SE

2 Answers

Where can I buy rack and pinion bushings for manual steering?


try a steering specialist shop as they may have stock of bushes for manual/power steering rack boxes ( shouldn't be any difference between manual and power steering box bush)
if you can get a bush out to use as a sample , many bearing shops sell bushes as well

Oct 11, 2015 | Cars & Trucks

1 Answer

Steering wheel won't return


you could have a problem with the steering rack bushings causing the steering to bind and not return.check the power steering fluid level,it could also be a pressure valve in the rack that is not working properly or a worn out rack &pinion assembly in which case the rack will have to be replaced as you have to if the bushings are worn out.also check the steering colume rag joint which is the universal joint in the colume which may be worn out.

Oct 19, 2011 | 1997 Mercury Cougar XR7

2 Answers

Power steering "pop"


On these vehicles, rack & pinion mount bushings and inner tie rod bushings basically wear away to a point sometimes they fall apart completely, dangerous to drive if thats the case. Easy fix for a trained technician.

Feb 24, 2010 | 1994 Chrysler LHS

1 Answer

My chrysler voyager 2lt got problems with power steering fluid full but making whining noises and very heavy


Belts tight? If so check your steering rack unit for leaks (wetness) around ends of seals.Also where rack is mounted for loose bushings that rack mount in. Look sort of like stablizer bushings. Possible causes would be bad Steering Rack or pump itself.

Jan 24, 2010 | 1999 Chrysler LHS

1 Answer

I own a 2001 RX300 and am noticing a bit of free play in the steering wheel when wheels are straight and the vehicle is moving. Also feel a vibration when driving around 70mph. The tires are ok and...


It sounds like a worn steering rack bush in the steering rack,as this explains the play youve mentioned,the vibration is caused by the wheels moving very slightly through the play in the rack bush,theres 1 letf and 1 right side bush in the ends of the steering rack that would need checking for play or movement

Nov 10, 2009 | 2003 Lexus RX 300

1 Answer

Suddenly loose steering


I had this problem and it was the rack bushings. I replaced them with Energy suspension ones. Toyota does not sell bushing for it, they sell the complete rack. You can check it by getting someone the turn the sterring wheel when its running. bend down next to the truck and watch the rack if this is the problem you will see the rack moving on the bushings.

Jun 07, 2009 | 2001 Toyota Tacoma

1 Answer

Problems with the steering


check if you got rack in pinion steering the mounting bolts for looseness .check tie rod end housing seats and the inner tie rod ball studs for wear.if all is good.your rack has worn pinion bushing and rack bushing.

Apr 10, 2009 | 1994 Mercury Cougar

1 Answer

Rack pinions and bushing installement


pretty decent job ahead first jack up car support with jack stands remove front wheels remove nuts on tie rod ends remove tie rod ends from spindles with tie rod end tool or tap with malet were they sit to loosen them hit the spindle area not the tie rod or tie rod threads then dissconnect power steering lines from steering rack also disconect steering linkage to rack there should be 2 main bolts holding assembly to frame remove them should free rack i know that car may have a unique design were u may have to remove inner tie rod ends first if it has those round bushings that always go bad disconect inner tie rod ends behind engine on top of steering rack then remove rack from wheel well replace those inner tie rod bushings u may be able to leave outer tie rod end connected to spindles and u may be able to get to the sterring rack from behind engine good luck

Mar 28, 2009 | 1997 Chrysler Concorde

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

399 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...