Question about Chrysler 300C

1 Answer

Today i pressed on the emergency break on my chrysler 300c and it stuck now i dont know how to release it. i cant even drive the car because the e-brake is on, what should i do to release it? is there a special way to reinstate it? my car is now stuck please help

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 83 Answers

Hi,
Some cars do not have an emergency brake release the way to release the emergency brake is by pressing it again harder than before. I know it sounds strange but some vehicle manufacturers have incorporated the release into the pedal itself. Good luck.

Posted on Mar 18, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Stick is lock on park cant put on drive by pressing break wy


have friend bump car just a little to move it apply break put on parking break
start vehicle press brake take out of gear let off emergency brake
you park on hill so this is called shift lock always use the emergency parking break when on hill so you dont get shift lock

Nov 09, 2013 | 2004 Ford Freestar

2 Answers

What would make the break lights on the outside stay on the whole time you are driving? Emergency break isnt on. 99 mercury cougar


Your brake switch is probably stuck. It is located under the dash in the cab, above the pedals. It is a chrome looking cylinder. It has a button on the end of it, when you push the break in, it releases the button. It is probably stuck.

Feb 06, 2011 | 1999 Mercury Cougar

1 Answer

Hi, I have a problem with my parking break I drive a 94 ford mustang and never really use the break. The other day I had to apply the break and from then on the break is stuck engaged and will not release....


YOUR EMERGENCY BREAK CABLES ARE SIEZED IN THE HOUSING. WHEN YOU DONT USE THE BREAK THEY HAVE A TENDENCY TO START RUSTING AND YOU WONT KNOW THIS UNTILL YOU FINNALLY USE THE BREAK AND ALL THE RUST IN THE CABLE BREAKS LOOSE AND JAMBS THE CABLE. THERE IS A CABLE FROM THE REAR DRUMS ON BOTH SIDES OF THE CAR VERY UNLIKLY THIS WILL WORK BUT TRY LUBING THE OUT SIDE OF THE COVERING ON THE CABLE WITH A PENETRATION OIL AND WORK THE BREAK LEVER AND SEE IF THEY BREAK LOOSE

Dec 24, 2010 | 2001 Ford Mustang

1 Answer

My gear shift on my 2007 Chrysler 300C is stuck in park. I applied the brake and am still unable to shift into drive.


Hi,DO NOT GET AND PAY FOR A TOW TRUCK Inside the shifter a locking arm has the tab broken off which holds the spring. Quick on the spot fix is to undo the two screws under the rubber cover above shifter follow the cable on the left hand side to the connector and apply pressure at the same time you shift. Long term fix no cost at all, remove shifter open and you will see the problem with the spring. The tab breaks of the side and all you need to do is PRE DRILL a hole in the top of the rocker for a self tapper screw to hold the spring, reassemble fixed

Nov 08, 2010 | 2007 Chrysler 300c AWD Sedan New Cars

1 Answer

My 2005 Chrysler 300C is stuck in the park position even when the car is started and I put my foot on the break.


look under the car at the gear box for the gear leaver to see if its moving when you try to get another gear,,if it dont move there is a fault in the gear selector not the gear box,,,

Jul 04, 2010 | 2005 Chrysler 300

1 Answer

How do i program the garage door opener on my 2008


This issue resolves at the garage opener, itself. Later model openers use rolling code technology, which moves access code with each transmitter, on each use...

Read the directions on your opener (yes get a ladder and climb up there..) essentially the methodology is typically press button on new transmitter, and hold, then press programming button on the opener, and when the lights flash, release both, then test remote...

Read directions on your opener, as a very similar process EXCLUDES all prior transmitters...

Doc.

Sep 19, 2009 | 2007 Chrysler 300c AWD Sedan New Cars

2 Answers

2005 Chrysler 300C, wont change gears from park...


if it is on an incline even a very slight on it will sometimes cause this you'll have push the car the opposite way to relieve pressure

Jul 08, 2009 | 2005 Chrysler 300

1 Answer

2005 Chrysler 300C will start but cannot move the gear shift to reverse or drive it seems to be locked in park.


the relay for the shifter is not working. when you press the brake do you hear a click if yes the lock is stuck at the shifter if not check for power at the relay.

May 16, 2009 | Chrysler 300C Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

310 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...