Question about Chevrolet Nova

1 Answer

All vacuums lines were not place back together correctly some were plugged with nails so i need a diagram so i can hook up the vacuum lines back together properly. thank you

Posted by on


1 Answer

Go to several local repair shops,until you find one with a
Data Base called ALLDATA,Mitchell or Motor.
They will print what you need

Posted on Mar 18, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Engine vacuum line diagram for 03 grand marquis 4.6

The vacuum line diagram is under the hood on the federal emissions decal. Any other vacuum related diagrams are in the Ford electrical and vacuum troubleshooting booklet. You can buy these used on eBay for less than $20.00 US

May 28, 2016 | 2003 Mercury Grand Marquis

1 Answer

Can you give me vacuum line diagram for a 2.8 V-6 1987 Chevy S-10?

We do not have the diagrams, they are in the factory service manual. You can buy a used manual here I have no affiliation with the site just passing on useful info to you.

Jul 24, 2012 | Chevrolet Tahoe Cars & Trucks

5 Answers

I recently took apart the climate control module on my 1985 Winnebago motor home (GMC chasis & drive train). I determined that the reason I was not getting heat or A/C was because the vacuum tubes...

The exact connection of vacuum tubes in 1985 Winnebago motor home 
The vacuum lines attach to the pushbutton assy. through a molded rubber thing that has probably disintegrated and the vacuum lines are lying loose. Here's how to reconnect them.
Notice a group of seven nipples. This is where the vacuum lines attach. I numbered the nipples in the text drawing below. NOTE: This is the layout as viewed from the front of the coach. Use pieces of rubber tubing to take the place of the old molded thingy and connect the lines to the numbered nipples as described below.

1 2 3 4
o o o o
o o o
5 6 7

Plug up nipples 1, 2, and 5.You can use  small nails that fit snugly into the holes.
Connect the black line (vacuum source) to nipple 6.
Connect the white line (rearward-pointing outlets) to nipple 4.
Connect the red line (downward-pointing outlets) to nipple 7.
Connect the blue line (heater) to nipple 3.
Check out.Thanks.
Thanks. keep updated for any more can rate this solution and show your appreciation.

Jun 12, 2010 | 1985 Oldsmobile Cutlass Supreme

2 Answers

I have a 1984 delta 88. It had a blown intake gasket and in removing the intake the vacuum lines were brittle and broken. Back together the lines are crossed and need a diagram to shoe the correct design

Try the website and register your car there. It's free and will give you access to an online repair manual for the car. The vacuum diagrams for your car can be found there. ( I checked) Hope this helped and best wishes.

Aug 25, 2009 | Oldsmobile 88 Cars & Trucks

1 Answer

Need vacuum diagram

I can't send you a diagram but I can tell you the basics that should get you mobile. Take a vacuum line from the lower front of your carb and hook it to your distributer vacuum advance. Take another from the front of your carb and run it to your EGR valve. It should be beside the carb on the intake manifold. At the rear of your carburator there is a large line coming out. It should be steel. It provides vacuum boost to your power brakes. Hook it up. Make sure all other vacuum outlets on the carb and intake are blocked off and you should be able to get mobile.

Jun 03, 2009 | 1985 Chevrolet Chevy

2 Answers

Correct vaccum line hook ups for 91 toyota pickup 6 cyc

You will find what your looking for here. free and with real pictures!!! got a few you can check out but use the first one first
these will help you a lot, they helped me out with the same problem

Apr 17, 2009 | Toyota Pickup Cars & Trucks

2 Answers

2001 ford taurus . i need the vacuum diagram so i

you can try your local library for a diagram and pictures showing you how you can also try this website:

Mar 08, 2009 | 2001 Ford Taurus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides