Question about Saab 900

Open Question

1995 900s 2.3L convertible. can the {srs} explosive part of the seat belt assembly be safely removed from the the reel assembly, it looks like it screwed into the dicast assembly,if the srs can be deactivated in this way and the two wires replaced for testing warning lights on dash board. as I am aprox 200 klms from the nearest saab dealer the seat belt assembly can be sent to them, andI can drive arround the farm with a temp seat belt fitted.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: srs light stays on ,in saab 1990 900s

I did not buy the car,the link you have sent me on your first email does not work

Posted on Jan 27, 2009

burgessjay69
  • 78 Answers

SOURCE: 1997 900s srs light stays on

hi you need tec 2 to reset it as no other tool will do the job

Posted on Jun 22, 2009

  • 73 Answers

SOURCE: Need to replace burnt out dash board lights 2001 Toyota Corolla

Just remove the 4 screws and then slowly pull the cluster out and reach behind and disconnect the plugs on the back of the unit and then remove the cluster. The bulbs can be removed by turning them and pulling out.

Posted on Sep 26, 2009

alicantecoli
  • 22095 Answers

SOURCE: 2008 Mercedes SLK 280 SRS

dont think you can it should reset itself when you turn ignition off and on again but its a merc so no doubt its done like this so its a dealer only job ,hope you have lots of wedge to pay the dealer

Posted on Jun 05, 2011

nicole99wu
  • 1049 Answers

SOURCE: I have the SRS warning

how to reset SRS airbag light turn off the srs , you can watch this vedio.

Posted on Aug 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Toyota Echo 2003 SRS light with ABS light blinking instead of Seat Belt Light


When you sit in the seat and put the seat belt on does everything work ok . If so look to the fact that you are required to wear a seat belt and the fact that you are not might be the problem.

Mar 09, 2014 | Cars & Trucks

1 Answer

How do i deactivate srs so i can replace front seatbelts on 2005 yaris


Disconnect the battery negative terminal.
1. Wait at least 90 seconds after the ignition switch is
turned off and the negative (-) terminal cable is
disconnected from the battery before starting the
operation.
(The SRS is equipped with a back-up power source, so
if work is started within 90 seconds of disconnecting
the negative (-) terminal cable of the battery, the SRS
may be deployed).
2. Do not directly expose the steering pad, front
passenger airbag assembly, center airbag sensor
assembly, front airbag sensor, front seat inner belt
assembly, seat position sensor, occupant
classification ECU, front seat side airbag assembly,
side airbag sensor, curtain shield airbag assembly,
rear airbag sensor or front seat outer belt assembly to
hot air or flames.

Feb 26, 2013 | 2005 Toyota Yaris 1.3

2 Answers

2008 Mercedes SLK 280 SRS light cam on after I unplugged the connection under the drivers seat. How do I reset it and make the warning light on the dash go away?


dont think you can it should reset itself when you turn ignition off and on again but its a merc so no doubt its done like this so its a dealer only job ,hope you have lots of wedge to pay the dealer

Jun 05, 2011 | 2007 Mercedes-Benz SLK-Class

1 Answer

I hit a ditch and both my airbags deployed and now i cant move my seat belts


inside your seatbelts there are small explosives known as pre-tensioners, when you crash these pre tensioners go off and pull you back into the seat as part of the SRS( supplemented restraint system) which means that aswel as new airbags you also need new seatbelts for your car.

Dec 04, 2010 | Ford F-150 Cars & Trucks

1 Answer

The SRS light on the dash is lit all the time. What does it mean?


supplementary restraint system warning light is on because a sensor in the seat/seat belt/or airbag is faulty.without the proper tools/electric tester, you will not be able to fix this yourself...
AIRBAGS ARE EXPLOSIVE.....

Aug 12, 2010 | 1999 Mitsubishi Diamante

1 Answer

2002 clk - srs light on all the time


think this is a dealer job ,the radio is connected via a big computerised circuit board behind the centre column of the dash .try giving the wires under the front seats a wiggle and make sure their are no coke cans or anything else under seats to damage the connections for the explosive seat belt restraint puller devices

Jan 03, 2010 | 2002 Mercedes-Benz CLK-Class

2 Answers

1994 olds 98 rear seat belt (behind driver seat) is stuck


If brute force doesn't unstick it remove the back seat and pull the cover off of the reel. The problem should be apparent. You can turn the reel with a large screwdriver if need be.
If the belt is damaged find another one at your local recycler, the side reel is behind a plastic panel that is easily removed, the assemblies are held in by big bolts.

Sep 13, 2009 | 1994 Oldsmobile Ninety Eight Regency

1 Answer

Seat belts locked retracted, SRS light is on


The SRS system involves explosive devices, for some reason they seem to have been set off in your case. Maybe I minor collision or a crash sensor malfunction caused it.

Only qualified professionals may work with these systems, diagnosing and replacing components. This is one of the things that are definitely off limits for DIY-ers.

May 28, 2009 | 2001 Acura 3.2TL

1 Answer

Replace airbag on `92 honda accord


When an SRS cable reel assembly is removed and set aside during vehicle repairs, the cable reel may rotate inside the assembly so it is no longer centered. If the assembly is reinstalled with the reel off-center, the cable can break when the steering wheel is turned to full lock. The cable reel holding fixture locks the reel while the assembly is off the vehicle, keeping it centered for reinstallation.
CABLE REEL REMOVAL PROCEDURE
1. Follow the procedure in the appropriate service manual for disconnecting the battery, and removing the dashboard panels, steering column covers, airbag, and steering wheel.
^ Always install short connectors on the connectors for the driver's and passenger's (if so equipped) airbags.
^ Make sure the front wheels are pointed straight ahead before removing the steering wheel.
2. Verify that the cable reel is centered; the yellow gear tooth is lined up with the alignment mark on the cover. Install the cable reel holding fixture in the cable reel assembly as shown. Use a TORX T-10 wrench.
3. Disconnect the 6-P connector, then remove the cable reel assembly.
CABLE REEL INSTALLATION PROCEDURE
1. Verify that the front wheels are still pointed straight ahead.
2. Reinstall the cable reel assembly, and reconnect the 6-P connector.
3. Remove the cable reel holding fixture.
4. Follow the service manual procedure for reinstallation of the steering wheel, airbag, steering column covers, and dashboard covers.
5. Verify SRS operation as described in the service manual. Road test the vehicle.
^ If the steering wheel spoke angle is not correct, change it by adjusting the tie rod ends. Do not remove and reposition the steering wheel.
PARTS INFORMATION
Cable reel holding fixture:
For 1992-95 Civic and Ohio-produced 1992-95 Accord
P/N 77900-SPO-999, H/C 4733564
For 1991 Accord Wagon, 1992-95
Prelude, 1995 Odyssey and Japan-produced
1992-95 Accord
P/N 77900-SM5-999, H/C 4733572
WARRANTY CLAIM INFORMATION
Use the Flat Rate Manual information for the repair being performed.

Jan 28, 2009 | 1992 Honda Accord

1 Answer

2005 Acura RSX


The buckle and belt need to be replaced.  They are only good for one time during a collision.  The buckle has an explosive charge in it that causes the buckle to pull back toward the seat.  The belt does the the same.  It locks up during an accident, also so body shops can't try to reuse it.  The SRS light will stay on until they are replaced.

Aug 29, 2008 | 2006 Acura RSX

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saab Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

rgbypoet

Level 2 Expert

166 Answers

Are you a Saab Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...