Question about 1998 Toyota Camry

1 Answer

Misfire piston 1,3,5 - 1998 Toyota Camry

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 62 Answers

Sounds like a faultyset of coils. Cylinders 1,3,5 will be all on the same bank. your engine is a v6, so cylinders 2,4,6 will be on one side, 1,3,5 the other. Check wire harness running to each set of coil packs. Especially the ones on the back bank close to firewall. Possibly the harness was rubbing on something or sitting on something hot, could have damaged the wires.

Posted on Mar 18, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is a misfire in cylinder #1


Loss of compression means either piston or valve issues. You wouldn't know without a compression test with a gauge.
Misfire could be spark plug, coil or electrical issues.

Jul 24, 2017 | Kia Cars & Trucks

1 Answer

Misfire cylinder 1-2 have new coils wires sparks plugs but persist misfire


Compression check will tell you if the piston is good.

Jun 13, 2017 | Cars & Trucks

1 Answer

Honda civic misfire


Your piston ring is bad letting oil get threw and causing the plug not to spark.

Nov 28, 2013 | Cars & Trucks

1 Answer

Misfire on cylinder 1 ford taurus 2000


You will have to change the cylinder piston; the ring around the piston is what causing this to misfire. As you can see, every time you remove that one spark plug, to look as liquid is been spill on it. The ring around the piston is damage and the cylinder is not burning the oil and gas as the spark plug send fire into the cylinder. contact your local mechanic for hands on help.

Feb 18, 2012 | Cars & Trucks

4 Answers

MISFIRING ON CYLINDER 1 VW POLO 1.4 3CYLINDER


I have changed a few cylinder heads under warranty for this type of problem. The exhaust valve guides wear, this causes the exhaust valve to seat badly, giving low compression. if one cylinder compresion reading is more than about 50 psi below the others, then this warrants head removal. It is quite a job, due to the fact that the camshft id chain driven. If you are up for it then once the head is removed, poor liquid into the exhaust ports and see if it leaks out through any of the exhaust valves.

Jul 03, 2009 | 2002 Volkswagen Golf

1 Answer

2004 audi s4


the car might still be under warranty. if you bought it as a certified used car they add on 25,000 miles to the existing 50,000 miles. If cylinder 1 is coming up misfire and your mechanic sees something wrong in that cylinder there most likely is some truth because if the cylinder was not firing right (detonating and discharging raw fuel) this would blow out the catalytic converter. The best way to see if it is a bent or broken valve is to buy a leak down tester which is part of a compression test. basically depending on specs you crank engine over grounding coils and see if all cylinders put out the same compression within 10psi of each other. it is usually around 160 -200 psi per cylinder. now to do a leak down test just leave pressure in and see rate of decreasing pressure and compare to other cylinders. if everything checks out i dont believe to be anything wrong with cylinder. Oh i forgot to ask any check engine lights on besides a cylinder 1 misfire P0301?

Feb 21, 2009 | 2004 Audi S4

1 Answer

2004 audi s4 b6


Very weird, a bad cat should not make it mis-fire, if it is just one cylinder it is mis-firing on, its worth checking the coil pack for that cylinder

Feb 21, 2009 | 2004 Audi S4

Not finding what you are looking for?
1998 Toyota Camry Logo

Related Topics:

241 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...