Question about 2000 Ford Econoline

1 Answer

What is the trick to adjusting the headlights on an E-250 - yr. 2000. I need them down just a touch.

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

There's a small dent at the top of the trim that surrounds the bulbs. This is actually where the screw for this is. you'll see it, can't miss it. Look directly at the center of the bulb and go directly up. That's for the sealed beam type headlights, which I'm assuming you have. There's also a horizontal adjustment screw typically on the outside edge of your headlights. Not sure what size/type screwdriver you'll need though... Hope that helps!

Posted on Sep 01, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to adjust headlights

Focusing (clean lens) aligning ... open hood look straight down at the headlight there is an adjustment screw on each side (actually 2) one for (up and down) the other (left to right)

Dec 24, 2013 | 2000 Volvo S70

2 Answers

Where is adjustment screw for headlights on 2008 impalla

Vic, the adjuster is either a allen key, torx, or #2 philips type bolt found close to the bolt that is holding headlight in place on inner fender rail/flange. I believe on the Impala the only adjustment is up and down of the light beam. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
How to Adjust the Headlights in Chevy Impala eHow
How do you clean headlights on 2002 chevy impala
How To Change Install Adjust Headlights 2000 2005 Chevrolet Impala

Jan 11, 2012 | 2008 Chevrolet Impala

1 Answer

Trying to adjust headlights on a 2000 Plymouth Grand Voyager

On drivers side, Look for holes in rad support above headlights and you'll see a bubble level. Behind light housing you'll find small hex, or torx head screw just left and behind bubble level area. That's Horizontal adjustment. Now go over to right about 3 " from bubble level,just past where headlight mount is attached and look down hole for another hex, or torx screw head. That's vertical adjustment. Passenger side location will be obvious after finding drivers side adjustments.

Sep 19, 2010 | 2000 Plymouth Grand Voyager

1 Answer

Driver side headlight does not shine as far as the passenger headlight

There are some adjuster screws on the headlight assembly that will move the headlight up and down and side to side. Park about ten feet from a wall and turn the lights on. Turn the screw until the beams are even on the wall and centered in front of and slightly to the middle of the car. Good luck.

Apr 14, 2010 | 2006 Lexus Is 250

1 Answer

How do i adjust the headlights on a 2000 isuzu rodeo

Open the hood, above each headlight you will find 2 adjusting screws pointing straight down. Be gentle as it is very easy to 'screw' them up!

Mar 28, 2010 | 2000 Isuzu Rodeo

1 Answer

Power to dash gagues and headlights goes out when

there is a wiring harness that runs down the column some where the wires are bear and touching the column all you have to do is find them and tape them up so they dont touch

Aug 09, 2009 | 1985 Ford F 250

1 Answer

How to adjust hand break hyundai elantra 2000 model

all cars have self adjusters these adjust them selves, but they do not always work, one trick is too hold your finger on the button and back up slow while pulling up and down on the handle, do it quick, on and off repeatedly like 50 times,but keep in mind you may have strecthed cables too which may need adjusting as well

May 11, 2009 | 2000 Hyundai Elantra

1 Answer

Headlight adjustment

yes you need a strong hand these are really in a bad spot/ Please rate my response thank you very much

Jan 28, 2009 | 2000 Volkswagen Beetle

1 Answer

Headlight adjustment

If you park in front of a garage door or building you can line up the lights .right behind the headlight you will see two shafts sticking up just below the support the headlights are attached to. One will adjust lights up &down the other one will adjust side to side.

Dec 04, 2008 | 2000 Chevrolet Silverado 1500

1 Answer

Replacing headlight on a 2000 Ford F250

You open the hood reach behind the light assm. and unplug the light grab the lock collar and twist it towards the drivers side and remove then grab the back of the bulb and wiggle up and down while pulling out then reverse the process to install note; do not touch the bulb with anything otherwise shotened light life will result.

Oct 04, 2008 | 2000 Ford F250 Super Duty Crew Cabs

Not finding what you are looking for?
2000 Ford Econoline Logo

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers


Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides