Question about 2001 Mazda Tribute

2 Answers

Engine miss firing installed new plugs still miss fires

Posted by on

Ad

2 Answers

You may get one bad spark plug in 50 years of driving

Does that answer your question?

You did not diagnose your problem, which
was a misfire.

Do you have codes PO301 thru PO306?

Ignition Coils cause misfires

Have to know the system your working on

Posted on Mar 18, 2011

Ad
  • Level 1:

    An expert who has achieved level 1.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Welcome Back:

    Visited the website for 2 consecutive days.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 3 Answers

Im having the same problem on my 2001 mazda mpv. I got a code of po301.Im a technition, and it seems to me that the plugs are dirty causing the miss fire. Possibly the Ignition coil. The cheapest way to find out is fist replace the plugs. Then again try switching the wires around make sure you mark them first to go back in original place.

Posted on Feb 06, 2013

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 454 Answers

SOURCE: cylinder not firing

Have you verified that you are getting spark at the plug when the engine turns over? To do this you can remove the spark plug and insert it into the end of the plug wire. Set the electrode against something metal on the engine. Crank the engine and watch for spark. If you get spark, then you can start thinking about timing, cylinder, fuel problems. If you don't get spark, think about distributor cap/rotor or wire problem.

Posted on Oct 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My car is missing need the wireing diagram for a 2003 mitsubishi galant es 2.4 ltr.


From the timing belt to the transmission the fireing orders are 1234 One and three fired the same time 2 and 4 fire the same time. Pull all the plugs for the spark plug on them and lay them across the top of the motor with plugs in them you can see which ones fire at what time. The spark plugs need to be touching a grounded part of the engine to fire. This also will help you find out if you have bad wires.

Apr 01, 2014 | 2003 Mitsubishi Galant

1 Answer

Miss fire at cylinder 6 on my 2004 grand am 3.4 i have replaced new plug new coil and wire whats next still miss fires


With the engine running and the cylinder misfiring tap (key word is tap) the injector with a screwdriver a couple of times. If the misfire goes away replace the injector.

Nov 29, 2012 | Cars & Trucks

1 Answer

2003 Santa Fe V 6 miss firing with New plugs and wires


Got a check engine light? Get the codes read to find out if the misfires are on all cylinders or just 1. Could be ign coil, bad crank or cam sensor, or a valve issue

Jan 27, 2018 | 2003 Hyundai Santa Fe GLS

3 Answers

2003 cavalier missing on cylinder 2


possibly wiring harness fault,sesor wheel installed backwards or an even fire/odd fire engine mismatched components

Nov 20, 2017 | 2003 Chevrolet Cavalier

2 Answers

2007 Pt Cruiser I Changed spark plugs 2 weeks ago Bosch Platinum +4, car is non turbo 2.4 ltr engine. within 1 day engine light on cylinder 1 miss fire, read on the net changed plugs to Champion RE14MC...


remove the plug from the #1 cylinder, and install it into the #2 cylinder , and put plug from # 2 clyinder in to #1 plug hole, connect plug wires, and start up vehichle, and if computer shows misfire on # 2 cylinder , then you have a bad plug, possibly porcelin insulator could have a hair line crack in it, hope that this information has helped you.

Mar 17, 2011 | Chrysler PT Cruiser Cars & Trucks

1 Answer

Still miss firing after i changed coil pack, engine will miss fire on all 4 plugs after temp comes up past half way. its ok for the first bit you take it. new plugs and wires.


buy new spark plugs and didtributor cap maybe rusty and wet. put injection cleaner to your tank 8 oz. only and let run few minutes. hope this will help.

Jan 11, 2011 | 1998 Chevrolet Cavalier

1 Answer

Runs rich and miss fires


Make sure the spark plug wires are on right (propper firing order), and check the TPS sensor. Are there any exhaust leaks or vacuum leaks? Did you use the original intake manifolds and Holley throttle body? If not you need to replace the PROM chip with the one from the donor car.

Sep 20, 2009 | 1986 Pontiac Fiero

1 Answer

Need the spark plug firing order on 2000 checvy k2500


18436572 Fireing Order. rotor runs clock wise.

Mar 19, 2009 | 2000 Chevrolet 2500

Not finding what you are looking for?
2001 Mazda Tribute Logo

440 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

79024 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...