Question about 1995 Volkswagen Cabrio

1 Answer

1993 VW calbrio won't crank. The engine spins but I'm not getting any fire

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 784 Answers

Check divider cover.

Posted on Mar 17, 2011

  • Diether Masing
    Diether Masing Mar 17, 2011

    When the lid is in the dealer. sure to check the spark plugs. With a cubic capacity of engine is it? If you have a lot of mileage. I've also seen a VW engine on which the valves were just so burned that it never got up and running.
    Let me be sure to know the mileage and engine cubic capacity. Or the precise modification of the car.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine Cranks but No Start


Check Idle Air Control Valve. Similar problem on my '94 LC. Part is expensive @ $660 but solved my problem as it was getting stuck.

May 22, 2013 | 1993 Toyota Land Cruiser

1 Answer

Not cranking and not firing


If the engine cranks, but won't start, and you are not getting spark to the plugs, you need to find out if you have voltage to the coils and module. Is the check engine light on ?

Aug 15, 2012 | 1992 Pontiac Grand Prix

2 Answers

My s10 truck is gettin fire, gas and air.. will turn over but will not crank.. what could be the problem?


Just because it get fuel,but does the fuel injector pulse? Add fuel in the throttle body if it wants to start your problem and solution will resie in bringing the fuel injector to working level

Apr 13, 2012 | Chevrolet S10 Cars & Trucks

1 Answer

My 2001 Lincoln LS will not start, it will fire but not start


it will fire but not start! ?????????? I assume from your post that when you turn the key to the start position the starter engages the flex plate and spins the engine , but does not start an run . This is a engine cranks but doesn't start an run condition . Crank no start ! Not it will fire and not start !!!!!!!!!
What's missing ? spark , fuel , compression Videos on youtube showing how to test for these thing's . Search crank no start

Aug 21, 2017 | 2001 Lincoln LS

1 Answer

2000 vw new bettle diesel won't start battery dead when i bought it touched it w/starting fluid cranked cut off


If the engine does not reach 300 rpm while cranking..engine will not start.

It needs good battery power to crank these with spare power to run the electronics.

If with good battery if fires and immediately stops, and the little 'yellow car' is illuminated in the cluster.... the immobiliser is active and you need a shop to fix it.

BTW..Stop with the Easy Start fluid already. You'll break a piston ring or worse...such as....the Glow Plugs will cause a back fire and you will likely strip the timing belt...major repairs...like $3500 and up.

Sep 05, 2011 | 2000 Volkswagen Beetle

1 Answer

My 1993 volvo 940 has fire where should be, and gas flow where should, but still want crank can you give me solution this my problem


Ok. if you have made sure you have ignition spark at the spark plugs by turning over the engine with a spark plug wire off and held next to the block and you have also made sure your Fuel injection is pulsing and putting fuel into the engine, start from scratch.Pull out all your spark plugs,clean them off check the gap and let the cylinders dry out.The put them back,turn the key to on and make sure again that y our fuel injection is priming the system.Then spin the engine over.if you are still not getting the car to start,then you may need to check and make sure your camshaft is not broken by spinning the engine over and making sure you have spark at each plug.Try that and repost.Good luck.

Aug 23, 2011 | 1993 Volvo 940

5 Answers

Truck wont crank. we have put new distributor cap, rotor button, coil pack, plugs, wires, and fuel pump. we also checked our firing order.


you said you repl dist cap that means you don't have a crank sensor you have electronic ing module. remove your elec ing module have it tested most auto parts stores could test your module, or check your coil at the neg terminal. should have power. if not you lost your primary volt from your batt.your secondary power is coming from your electronic ing module from the module to the pos terminal on the coil, when the eng cranks,from the coil to the dist cap , from the dist cap center to the rotor then out to the plugs,this all happen pervided the timing belt or timing chain is ok. the cumbustion chainber needs 3 things , thats fuel, air, and spark.

Apr 17, 2011 | 1996 Chevrolet K1500

1 Answer

I have a grand cherokee 1993 it wont im not getting fire


Might be your crank sensor, your coil, your distributor or even your ecu. All of those being bad will prevent the jeep from firing. If you do not have a check engine light lighting up on the dash when you turn the key to on, before trying to crank the engine, then it's your ecu which is bad and needs repair.

Feb 03, 2011 | 1993 Jeep Grand Cherokee

2 Answers

Turns over but won't fire the motor.Getting gas,new coil,new distributer,still won,t fire.o


Did you do a tune up on the vechicle? Does it sound like it wants to start? It could be the spark plugs.

Nov 27, 2010 | 1993 GMC Sierra

1 Answer

No fire, need igniter schematic for 1993 toyota forunner 3.0 v-6


check your coil pack (they can test at most parts stores) if good Check the oil sending unit, probably have to replace it, don't know how to test it. If that doesn't get it It might be the crank sensor. All of those will make your engine not spark. Assuming, you are getting fuel that is.

Apr 10, 2010 | 1993 Toyota Land Cruiser

Not finding what you are looking for?
1995 Volkswagen Cabrio Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

yadayada
yadayada

Level 3 Expert

77202 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8743 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...