Question about 2006 Hyundai Tiburon

Open Question

NEED TORQUE SPECS FOR FLYWHEEL ON 06 TIBURON, V-6, MANUAL PLEASE

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
mindreader
  • 578 Answers

SOURCE: i need the torque specs for a ford 300 inline 6

Tighten all bolts to 10 Lbs, then 20 Lbs, then 35 Lbs.
That should be fine for the 6 cylinder flywheel.

Posted on Oct 10, 2009

Ad
ldtrisch
  • 83 Answers

SOURCE: 2006 TIBURON, V-6, MANUAL. NEED FLYWHEEL TORQUE

88-95 ft/lbs

Posted on Mar 17, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Toyota 2c. I need cylinder head and flywheel Torque settings


Toyota 2c ...
USE NEW BOLTS...
Torque sequence:
You're driving a diesel single cylinder head engine. Engine head torque has to be done in specific order and stages if not can warp head or break bolts. Suggest you get torque sequence and torque specs from your Toyota dealer, they can give you correct answer. Don't trust answers on here, if you choose wrong specs. could end up messing up head.


Flywheel - Use a Sealer on bolt, Manual Transmission 88nm/65 ft lb... Auto Transmission 74nm/55 ft lb

Aug 06, 2014 | Cars & Trucks

1 Answer

1997 jeep wrangler 6 cylinder flywheel torque


It depends on what you are calling "flywheel". If it is a manual transmission, the vehicle is equiped with a true "flywheel", if it is equipped with an automatic transmission, it is equipped with a "flex plate" which a lot of people refer to as a flywheel.

With that said the torque specs are:
Flywheel-to-crankshaft bolts - 105 Ft. Lbs (142 N.m)
Flexplate-to-crankshaft bolts - 55 Ft. Lbs (75 N.m)

May 14, 2012 | Jeep Wrangler Cars & Trucks

1 Answer

2001 tiburon


Torque converters are bolted up to the flywheel or flexplate. Probably 4 or 6 bolts from the flywheel engine side into the torque converter.

May 03, 2012 | 2001 Hyundai Tiburon

2 Answers

Torque settings for 2005 lancer es fly wheel gearbox etc


2.0L Evolution engine

flywheel bolts 132 =/- 5 N.m. 98 +/- 3 ft lbs.

transmission to engine bolts 48 +/- 6 N.m. 36 +/- 4 ft lbs.

2.0L Non- Evolution engine

flywheel bolts 98 +/-5 N.m. 72 +/- 3 ft lbs.

transmission to engine bolts 48 +/- 6 N.m. 36 +/- 4 ft lbs.

2.4L Ralliart engine

flywheel bolts 132 +/- 5 N.m. 98 +/- 3 ft lbs.

transmission to engine bolts 48 +/- 6 N.m. 36 +/- 4 ft lbs.

Dec 28, 2010 | 2005 Mitsubishi Lancer

1 Answer

1996 hyundai lantra cylinder head torque spec


dak408_40.gif
Revised Bulletin
This TSB supersedes the Cylinder Head Bolt Torque Specifications previously described in TSB # 96-20-003, TSB # 96-20-003-1 and TSB # 97-20-004.
DESCRIPTION:
This bulletin provides torque specification corrections to the 1996 and 1997 Elantra Shop Manual, 1997 Elantra Service Data Book, 1997 Tiburon Shop Manual and 1997 Tiburon Service Data Book.
Please record the corrections (listed) in the appropriate manuals and write the TSB number on the bottom of the pages listed below for future reference.
CYLINDER HEAD BOLT:
(M10) 30 Nm (300 kg.cm; 22 lb.ft) + (60°to 65°) + (60°to 65°)
(M12) 35 Nm (350 kg.cm; 26 lb.ft) + (60°to 65°) + (60°to 65°)

Nov 21, 2010 | Hyundai Motor 1996 Elantra

1 Answer

How do you change the flywheel?


Pull the transmission back (or remove) enough to access the flywheel/ torque converter. Remove the converter from the flywheel, then you will see the flywheel bolts that mount the flywheel to the crankshaft--(I think there are 6). It is advisable to replace these bolts with new ones when reinstalling the flywheel, and be sure to get the proper torque spec for the bolts from autozone or a reputable shop and torque them sequencially correct and to the proper spec.

Oct 03, 2010 | 1982 Chevrolet El Camino

1 Answer

I need the torque specs for a ford 300 inline 6


Tighten all bolts to 10 Lbs, then 20 Lbs, then 35 Lbs.
That should be fine for the 6 cylinder flywheel.

Oct 08, 2009 | 1997 Ford F150 Regular Cab

1 Answer

03 tiburon clutch torque specs


your torque specs for clutch to flywheel
15-22NM

Jul 11, 2009 | Hyundai Motor 1997 Tiburon

1 Answer

2003 Tiburon 6 spd clutch replacement now tranny won't respond


Possibility, you may have intalled the clutch disk backwards.... if so, the disk hub is torqued against the crankshaft hub preventing engagement of the clutch. 2003 TIBUORN DUAL MASS FLYWHEEL AND CLUTCH DISC ASSEMBLY INSTALLATION PROCEDURE DESCRIPTION: The 2003 MY 2.7L Tiburon vehicle equipped with the 6-speed manual transaxle employs a dual mass flywheel system. The 2003 Tiburon Shop Manual does not show the clutch disc assembly with the dual mass flywheel. This bulletin provides information about how to assemble these components. NOTE Although it is possible to assemble the clutch disc with either side facing the flywheel surface, only the assembly of these two parts shown in this bulletin is correct.
PARTS ASSEMBLY:
  1. Attach the dual mass flywheel to the engine crankshaft assembly.
  2. Identify the clutch disc flange side and the collar side as shown. 0240025a.gif
  3. Install the collar side of the clutch disc on the dual mass flywheel surface so that the flange side is facing the pressure plate side as shown. 0240025b.gif
  4. Attach the pressure plate to the dual mass flywheel and complete assembly of the remaining components per the Shop Manual procedures. 0240025c.gif

Dec 14, 2008 | 2004 Hyundai Tiburon

Not finding what you are looking for?

Open Questions:

0 Answers

Shifting problems My car is a 2006 Hyundai Tiburon, Automatic, 2.0L 4 Cylinder I've had the car two years I don't know what's related and what isn't so here is the story. Bought car, (cruise control did not work) but everything else seemed fine, engine light came on code read Vehicle Speed Sensor so I bought an input and an out transmission speed sensor and had them installed, Motor blew 2 heads had motor replaced with an almost new motor. Cruise control now works, three days later car would not come out of park shifter moved but car stayed in park felt like shifting cable let loose, I called a backyard mechanic friend and he moved the shifter hard and it went into drive said probably buddy who changed motor forgot to unhook cable and stretched it (made sense to me) it did this everytime car was put into park had to yank on the shifter to get it to shift so I started parking her in neutral and it never messed up, after 3 weeks my new shift cable came in so I went to show my mechanic what car was doing it wouldn't do it worked fine, told him I'd call him next time it messed up this is a year and a half later hasn't messed up like that again! I had already bought the cable so I decided to have it installed anyways even though problem seemed fixed went to a shop they told me nothing is wrong with my cable..... Approx 6 months ago put car into drive and started driving the car reved out (I call it) motor got really loud and RPM gage went to 4K and car jerked really bad and made a really loud snap noise so I pulled over and roughley shift car into park and back into drive and drove this fixed the issue for that drive anyways.... my car one day over heated to red line in a 5 minute drive in the winter my mechanic said must be an air lock so he drained my fluid and replaced ect, next day car wouldn't start, blew starter, replaced that, next day driving car and in a 5 minute drive it overheated to red line took car to shop he said gage is reading wrong car is barely even warm so I decided to take the car home and worry about this issue pay day well the next day car wouldn't start, blew alternator, at this time my mechanic looked over car more closley turns out I had a bad ground so he put on new alternator and new ground, this was a month ago and no more issues with overheating or not starting. However I still have this issue (copy and paste) "put car into drive and started driving the car reved out (I call it) motor got really loud and RPM gage went to 4K and car jerked really bad and made a really loud snap noise so I pulled over and roughley shift car into park and back into drive and drove this fixed the issue for that drive anyways...." After having ground put on and shifting issue still there I took my car directly to Hyundai they ran all their computer tests and transmission tests and took car for a test drive car worked fine and only code that came up was Vehicle Speed Sensor. So here is where I stand first question how many speed sensors does my car have is a transmission input/output speed sensor different then a vehicle speed sensor? I looked on parts sites and only speed sensors I find are ABS speed sensor and Vehicle Speed Transmisson Sensor, so maybe sensors I bought are no good but they were bought new or maybe the connector for the sensors are bad? I don't know any suggestions would be greatly appreciated.

Jan 12, 2016 | 2006 Hyundai Tiburon

See all 2006 Hyundai Tiburon Questions

2006 Hyundai Tiburon Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...