Question about 2000 Plymouth Breeze

1 Answer

I have a 2000 plymouth breeze it will not start found out iot was the timing belt replaced it an it still won't start.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 215 Answers

You need to narrow down the issue. Start with spark meaning does it have any. Then move to fuel delivery and pressure. Without those it doesn't matter what you do it wont start. Fuel is easy to verify just pour a bit into the intake and crank the engine. If it starts you know you have a fuel delivery problem. If it doesn't have spark then you have a coil, ignition module, crank sensor, cam sensor, or knock sensor issue.

One thing you need to be very sure of is if the when replacing the timing belt that both timing marks (camshaft and crankshaft) are where they are suppose to be. Remember the crank turns twice for every one cam rotation. So is it 180 degrees out?

Posted on Mar 17, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1996 plymouth breeze jumped timing after timing belt replaced ran at idle for 20 mins then stalled no start


check that the belt has not come off
it is doubtful that the belt will "jump" timing after 20 minutes of running so check for other failres

Jan 27, 2017 | 1996 Plymouth Breeze

2 Answers

How do i replace the other belt on 2000 plymouth breeze


That belt would be for power steering,accessed from below would be easier, the pump bracket is the adjustment for it and the serpentine belt would need to be off to remove and install the other one.

Apr 11, 2014 | Plymouth Breeze Cars & Trucks

1 Answer

99 Plymouth breeze won't start


what is the other posible reason a 99 plymouth breeze wont start it rolls over well i change the crank sensor,camshft sensor,ignation coil but won't start

Dec 28, 2012 | 1999 Plymouth Breeze

1 Answer

2000 plymouth breeze 2.4 jumped timing and now leaking antifreeze.


that would'nt make any difference to water pressure! may be possible that your vehicle was overheating! overheating caused excessive pressure in the system, which popped(The noise you heard) one of the hoses, or a connection!

Car stalled from over heating!

Apr 27, 2012 | 2000 Plymouth Breeze

1 Answer

I have a 1998 Plymouth breeze that won't start.


Hello! I would suggest having a look at the Brown wire that connects to the starter solenoid...It may be touching chassis ground...Also check the Large Red lead that attaches to the starter...One or both are touching chassis ground...If the Red lead is against ground it will not blow a fuse, in that it is connected directly to battery...And give the systoms that you have...Guru...saailer

Feb 13, 2012 | 1998 Plymouth Breeze

1 Answer

I have a 2000 Plymouth breeze, 2.4 l dohc. The Pulley behind the alternator seems to be loose, and the belt has come off. Can you give me a diagram of what needs to be removed in order to replace it? the...


the belt that goes to the cam and timing dont mess with that unless its one of those pulley's, there are no diagrams that can help u but u can buy a book.

Dec 09, 2010 | 2000 Plymouth Breeze

1 Answer

Car will turn over but wont start, it is firing, and it has fuel pressure, its a 2000 plymouth breeze 2.4L


Timing belt? How long since you replaced it? If over 80,000 that is most liekly it.

Nov 24, 2009 | 2000 Plymouth Breeze

1 Answer

My car jump time


#1 are you sure it jumped time?#2 how do you know this? if in fact it has jumped time you will need to have the timing belt replaced.the average interval for replacement is 60,000-80,000.it is also a good idea to replace the water pump at the same time as it is driven by the timing belt.

Apr 10, 2009 | 1999 Plymouth Breeze

1 Answer

Won' start


timing is out! a tooth or two!!!frisky these are these are interfere belt CAUTION!!!! valve bend easy!!!!

Dec 27, 2008 | 1998 Plymouth Breeze

Not finding what you are looking for?
2000 Plymouth Breeze Logo

276 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...