Question about 2009 Jeep Patriot
There is actually two panels that you must take off in order to remove the mirror. It's the same for both sides. 1) The rounded triangular trim at the top front inside door comes off first. 2) Small square trim piece directly below it is next. Both can be removed with trim tools which you can get at any automotive store. Lordco, Napa, Princess Auto, Canadian Tire for example here in Canada. After the trim pieces have been removed you'll see three screw studs pointing inward towards the dash board. 3) You'll use a 10mm socket or a screwdriver with an adapter to take off the nuts. Be careful not to drop the nuts!! And thats it. The mirror housing will now come off of the door. 4) Replace with new housing and reverse the order in which you have just taken it off.
Posted on Aug 25, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
most mirror glass pops out it has plastic clips on back of glass. first practice on broken one take a flat head screw driver and use rag to protect paint pry around glass to release but be gentle at the same time hope this helps u
Posted on Apr 03, 2009
Turn the key on applie E-brake move the shifter to the lowest postion to be able to remove the center bezel. with a small plastic pry tool pry the gray bezel out. Caution use caution don't pull the bezel out all the way u can break the A/C control lines. turn the bezel to the side so you can remove the radio. 4 philips head srew hold the radio in. remove the radio and disconnect electral connecter. hope this helps..
Posted on Jul 09, 2009
SOURCE: Replacing a drivers side mirror
There is a panel on the inside of the door where the mirror is.
That has to come off.
In some cases the door panel has to come off also.
Under the mirror panel there are nuts that hold the mirror on. Remove the nuts unplug the harness and install the new one.
Posted on Oct 07, 2008
you need to remove the trim pannel parallel to the mirror on the inside of the vehicle, normally triangle shaped, from there there will be 3-4 nuts or bolts you need to remove, once that is done the mirror will be free to be removed.
Posted on Jul 17, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door
Posted on Sep 29, 2009
Tips for a great answer:
Jul 10, 2017 | Jeep Cars & Trucks
Jan 28, 2017 | 2009 Jeep Patriot
Dec 11, 2013 | 2009 Jeep Patriot 2.4
Jun 08, 2012 | 2009 Jeep Patriot
Apr 27, 2012 | 2009 Jeep Patriot
Mar 05, 2010 | 2009 Jeep Patriot
Oct 07, 2008 | 2001 Jeep Grand Cherokee
1,434 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: