Question about Ford E-350 Super Duty

1 Answer

I have a 2006 ford e450 ambulance with a horn problem...i replaced the defective horns and tested the horn ...it blows and will not shut off even after pulling the horn relay and nicro fuse under the hood...any ideas???

Posted by on

  • Richard Head May 22, 2012

    Ambulances have the wiring to the horn modified to a horn siren switch so it can also operate the siren. Usually they splice in below the steering column or out near the horns, locate this splice and eliminate the amb wires and reconnect the ford ones

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 151 Answers

It could be the horn switch in the steering wheel. That is my guess

Posted on Mar 17, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i fix my car if my horn wont shut off


Disconnected horn button if horn stops need new button

Apr 12, 2015 | 2006 GMC Canyon

3 Answers

I have a 1998 chrysler concorde. The airbag light on the dash stays on and my horn doesnt work. How do i fix this without costing me tons of money?


Could be a wiring problem or the clockspring in the steering column.
You would need to pull the steering wheel and test the circuits.

Mar 26, 2015 | Chrysler Cars & Trucks

2 Answers

My horn was replaced on my 2006 kia sedona and sometimes it wont honk and sometimes it will


I pulled the center out of the steering wheel and grounded the horn contact. The horn honked like it should. This is on our 2006 KIA Sedona. The horn used to work once in awhile, but not at all now. This leads me to believe that the clockspring in the steering column is defective. I will call the dealer on Monday to see if there is a warranty fix, but I doubt that there is.

Sep 28, 2012 | 2006 Kia Sedona 3.5

1 Answer

Horn stays on


Normally there is a horn relay, try replacing that. The contacts can weld together and keep the horn on. If you take the relay out and leave it out, you won't have a horn but at least it won't be blowing all the time.

Feb 05, 2012 | 2004 Ford Expedition

1 Answer

Horn not working fuse is good


Hi, you have to conduct a small test yourself to get the cause of the problem
Start by testing the horn itself. Run a jumper wire to the power connector on the horn, and to the positive battery terminal. When you touch the battery terminal, the horn should sound. If it does not, replace the horn.
If the horn is good, the problem is either in the switch in the steering wheel, or in the horn relay!!

May 15, 2011 | 2006 Ford Five Hundred

2 Answers

Have Ford 250 Super Duty replaced battery and now when I reattached negative and positive cables the horn blows and does not stop and it wont start



Welcome to FixYa.com


Check the horn button or relay.






Thank you for Using FixYa.com

Kind Regards, Lee

Your FixYa Expert and Master Technician

Feb 04, 2011 | 2006 Ford F-250 Super Duty

2 Answers

2006 grand prix horn fuse keeps blowing. what should i look for


horn may be shorted internally. Try pulling the connector off the horn, put in a fresh fuse, see if it blows.

If it still blows, you have a short in the wiring or the relay. If there is no obvious short in the wiring, change the relay.

If the fuse doesn't blow with the horn disconnected, replace the horn.

Sep 11, 2010 | 2006 Pontiac Grand Prix

1 Answer

I have a 97 ford expedition eddie bauer an my horn dont work i test the horn and its good i test the wire an there was no power an i dont no were the fuse located at


ok there should be 2 fuse boxes on this vehicle one under the driverside dash one under hood your horn fuse is under dash replace and replace your horn high resistance will cause the horn fuse to blow

Nov 27, 2009 | 1997 Ford Expedition

1 Answer

2001 Ford Escape .... Horn won't stop blowing


this is caused by a defective horn switch pad, replace it.

May 04, 2009 | 2001 Ford Escape

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

210 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...